Dell Command Line Reference Guide for the S4048–ON System 9.14.2.5

PDF

show cam mac linecard (dynamic or static)

Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.

Syntax
show cam mac linecard slot port-set port-pipe [address mac_addr | dynamic | interface interface | static | vlan vlan-id]
Parameters
linecard slot
(REQUIRED) Enter the keyword linecard then a slot number to select the linecard for which to gather information.
port-set port-pipe
(REQUIRED) Enter the keywords port-set then a Port-Pipe number to select the Port-Pipe for which to gather information. The range is from 0 or 1.
address mac-addr
(OPTIONAL) Enter the keyword address then a MAC address in the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic
(OPTIONAL) Enter the keyword dynamic to display only those MAC addresses the switch dynamically learns.
interface interface
(OPTIONAL) Enter the keyword interface then the interface type, slot and port information:
  • For a port channel interface, enter the keywords port-channel then a number.
  • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.
  • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
static
(OPTIONAL) Enter the keyword static to display only those MAC addresses specifically configured on the switch.
vlan vlan-id
(OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address assigned to the VLAN. The range is 1 to 4094.
Command Modes
  • EXEC
  • EXEC Privilege
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide.

Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.5.1.0
Added support for 4-port 40G line cards on the E-Series.
8.3.7.0
Introduced on the S4810.
7.5.1.0
Introduced on the C-Series.
pre-6.2.1.1
Introduced on the E-Series.
Example
Dell# show cam mac linecard 1 port-set 0
Port - (TableID) assignments:
00(01) 01(01) 02(01) 03(01) 04(01) 05(01) 06(01) 07(01) 08(01) 09(01) 10(01) 11(01)
12(01) 13(01) 14(01) 15(01) 16(01) 17(01) 18(01) 19(01) 20(01) 21(01) 22(01) 23(01)
Index Table ID VlanId  Mac Address     Region       Interface
0      1       0    00:01:e8:0d:b7:3b  LOCAL_DA       1e000
1      1       0    00:01:e8:0d:b7:3a  LOCAL_DA       1e000
101    0       0    00:01:e8:00:04:00  SYSTEM_STATIC  01c05
102    0       0    01:80:00:00:00:00  SYSTEM_STATIC  01c05
103    0       0    01:00:0c:cc:cc:cc  SYSTEM_STATIC  01c01
104    0       0    01:80:c2:00:00:02  SYSTEM_STATIC  01c02
105    0       0    01:80:c2:00:00:0e  SYSTEM_STATIC  01c01
106    0       0    00:01:e8:0d:b7:68  SYSTEM_STATIC  DROP
107    0       0    00:01:e8:0d:b7:67  SYSTEM_STATIC  DROP
108    0       0    00:01:e8:0d:b7:66  SYSTEM_STATIC  DROP
109    0       0    00:01:e8:0d:b7:65  SYSTEM_STATIC  DROP
110    0       0    00:01:e8:0d:b7:64  SYSTEM_STATIC  DROP
111    0       0    00:01:e8:0d:b7:63  SYSTEM_STATIC  DROP
112    0       0    00:01:e8:0d:b7:62  SYSTEM_STATIC  DROP
113    0       0    00:01:e8:0d:b7:61  SYSTEM_STATIC  DROP
114    0       0    00:01:e8:0d:b7:60  SYSTEM_STATIC  DROP
115    0       0    00:01:e8:0d:b7:5f  SYSTEM_STATIC  DROP
116    0       0    00:01:e8:0d:b7:5e  SYSTEM_STATIC  DROP
117    0       0    00:01:e8:0d:b7:5d  SYSTEM_STATIC  DROP
Dell#

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\