Dell Command Line Reference Guide for the S4048–ON System 9.14.2.5

PDF

show vxlan vxlan-instance unicast-mac-remote

Displays the information of the remote unicast MACs associated with the logical network related to Network Virtualization Overlay (NVO) Gateway.

Syntax
show vxlan vxlan-instance instance ID unicast-mac-remote [logical-network name | vnid VNID]
Parameters
instance ID
Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial release.
name
(Optional) Enter the name of VXLAN logical network with a maximum length of 30 characters.
vnidVNID
(Optional) Enter the keyword vnid and then enter the ID of the VXLAN. The range is from 1 to 16777215.
Command Modes
  • EXEC

  • EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.13(0.0)
Updated to show VLT peer’s local macs.
9.11(0.0)
Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and Z9100–ON.
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S6100–ON.
9.10(0.1P10)
Introduced on the Z9100–ON.
9.8(0.0)
Introduced on the S4048–ON.
9.7(0.0)
Introduced on the S6000-ON.
9.4(0.0)
Introduced on the S6000.
Example
DellEMC#show vxlan vxlan-instance 1 unicast-mac-remote
Total Remote Mac Count: 1
VNI             MAC                        TUNNEL
100             00:00:07:00:02:00   (N)    60.1.1.1
Related Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\