Dell Command Line Reference Guide for the S4048–ON System 9.14.2.6

interface-type

(OPTIONAL) Enter one of the following keywords and the interface information:

• For a port channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
• For a backup interface for this interface, enter the keyword backup.

NOTE This command also enables you to view information corresponding to a range of ports.

• For physical interfaces, you can specify multiple ports as slot/port-range. For example, if you want to display information corresponding to all ports between 1 and 4, specify the port range as show interfaces interface-type 1/1 - 4.
• For port–channel interfaces, you can specify multiple ports as port-range. For example, if you want to display information corresponding to all ports between 1 and 4, specify the port range as show interfaces port—channel 1 - 4.

stack-unit unit-id

(OPTIONAL) Enter the keywords stack-unit then the stack member number.

• EXEC
• EXEC Privilege

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100–ON.

9.9(0.0)

Added support to display the interface configurations corresponding to a range of ports.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.5.1.0

Added support for 4-port 40G line cards on the E-Series.

8.2.1.0

Added support for 4093 VLANs on E-Series.

8.1.1.0

Introduced on the E-Series.

7.6.1.0

Support added for hybrid port/native VLAN, introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

E-Series legacy command

Items

Description

Name

Displays the interface’s type, slot/port[/subport] number.

802.1QTagged

Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid (“Hybrid”), which supports both untagged and tagged VLANs by the port.

Vlan membership

Lists the VLANs to which the interface is a member. Starting with Dell EMC Networking OS version 7.6.1, this field can display native VLAN membership by the port.

DellEMC# show interfaces switchport
Name: TenGigabitEthernet 1/1
802.1QTagged: Hybrid
Vlan membership:
Vlan   2, Vlan 20
Native VlanId: 20

Name: TenGigabitEthernet 1/2
802.1QTagged: True
Vlan membership:
Vlan   2

Name: TenGigabitEthernet 1/3
802.1QTagged: True
Vlan membership:
Vlan   2

Name: TenGigabitEthernet 1/4
802.1QTagged: True
Vlan membership:
Vlan   2
--More--

• interface — configure a physical interface on the switch.
• show ip interface — display Layer 3 information about the interfaces.
• show interfaces transceiver — display the physical status and operational status of an installed transceiver. The output also displays the transceiver’s serial number.