Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

PDF

show ip bgp paths

View all the BGP path attributes in the BGP database.

Syntax
show ip bgp[vrf vrf-name] paths [regexp regular-expression]
Parameters
vrf vrf-name
(OPTIONAL) Enter the keyword vrf to view all path attributes in the BGP database corresponding to that VRF.
NOTE: DescriptionYou can use this attribute to view information on all path attributes in the BGP database that correspond to either a default or a non-default VRF.
regexp regular-expression
Enter a regular expression then use one or a combination of the following characters to match:
  • . = (period) any single character (including a white space).
  • * = (asterisk) the sequences in a pattern (zero or more sequences).
  • + = (plus) the sequences in a pattern (one or more sequences).
  • ? = (question mark) sequences in a pattern (either zero or one sequences).
    NOTE: Enter an escape sequence (CTRL+v) prior to entering the ? regular expression.
  • [ ] = (brackets) a range of single-character patterns.
  • ( ) = (parenthesis) groups a series of pattern elements to a single element.
  • { } = (braces) minimum and the maximum match count.
  • ^ = (caret) the beginning of the input string. If you use the caret at the beginning of a sequence or range, it matches on everything BUT the characters specified.
  • $ = (dollar sign) the end of the output string.
Command Modes
  • EXEC
  • EXEC Privilege
Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version
Description
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S3148.
9.10(0.0)
Introduced on the S6100-ON.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.4(0.0)
Added support for VRF for the S4810, S4820T, and S6000.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage Information

The following describes the show ip bgp path command shown in the following example.

Field
Description
Total
Displays the total number of BGP path attributes.
Address
Displays the internal address where the path attribute is stored.
Hash
Displays the hash bucket where the path attribute is stored.
Refcount
Displays the number of BGP routes using this path attribute.
Metric
Displays the MED attribute for this path attribute.
Path
Displays the AS path for the route, with the origin code for the route listed last. Numbers listed between braces {} are AS_SET information.
Example
DellEMC# show ip bgp paths ?
community               Display community information
extcommunity            Display extended community information
regexp                  Display path information based on a regular expression
|                       Pipe through a command


DellEMC#show ip bgp paths
Total 2 Paths
Refcount Metric Path
1       0           200 i
1       0           200 i
DellEMC#

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\