Dell EMC SmartFabric OS10 User Guide Release 10.5.0

默认情况下，RPVST+ 已启用，并且仅在您将第一个成员端口添加到 VLAN 之后创建实例。要加入 RPVST+，端口通道或物理接口必须是 VLAN 的成员。将所有物理和端口通道接口添加到默认 VLAN (VLAN1)。

• 在 CONFIGURATION 模式下启用快速 PVST+ 模式。

  spanning-tree mode rapid-pvst

配置 RPVST+

OS10(config)# spanning-tree mode rapid-pvst

查看 RPVST+ 配置

OS10# show spanning-tree active
Spanning tree enabled protocol rapid-pvst with force-version rstp
VLAN 1
Executing IEEE compatible Spanning Tree Protocol
Root ID    Priority 32768, Address 3417.4455.667f
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID    Priority 32769, Address 90b1.1cf4.a523
Configured hello time 2, max age 20, forward delay 15
Interface                                            Designated
Name           PortID   Prio Cost Sts  Cost Bridge ID     PortID
------------------------------------------------------------------------
ethernet1/1/5  128.276  128  500  FWD  0    32768  3417.4455.667f  128.146
ethernet1/1/6  128.280  128  500  BLK  0    32768  3417.4455.667f  128.150
Interface
Name           Role  PortID   Prio Cost Sts  Cost Link-type Edge
--------------------------------------------------------------
ethernet1/1/5  Root  128.276  128  500  FWD  0    AUTO      No
ethernet1/1/6  Altr  128.280  128  500  BLK  0    AUTO      No