Dell EMC SmartFabric OS10 User Guide Release 10.5.1

• process-id — (Optional) View LSA information for a specific OSPF process ID. If you do not enter a process ID, the command applies to all the configured OSPF processes.
• vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to display LSA information for the OSPF process corresponding to that VRF.

• Link ID — Identifies the router ID.
• ADV Router — Identifies the advertising router’s ID.
• Age — Displays the LS age.
• Seq# — Identifies the LS sequence number. This identifies old or duplicate LSAs.
• Checksum — Displays the Fletcher checksum of an LSA’s complete contents.
• Link count — Displays the number of interfaces for that router.

OS10# show ip ospf 10 database
OSPF Router with ID (111.2.1.1) (Process ID 10)

                Router (Area 0.0.0.0)

Link ID         ADV Router        Age     Seq#          Checksum    Link count
111.2.1.1       111.2.1.1         1281    0x8000000d    0x9bf2          3
111.111.111.1   111.111.111.1     1430    0x8000021a    0x515a          1
111.111.111.2   111.111.111.2     1430    0x8000021a    0x5552          1
112.2.1.1       112.2.1.1         1282    0x8000000b    0x0485          3
112.112.112.1   112.112.112.1     1305    0x80000250    0xbab2          1
112.112.112.2   112.112.112.2     1305    0x80000250    0xbeaa          1

                Network (Area 0.0.0.0)

Link ID         ADV Router        Age     Seq#          Checksum
110.1.1.2       112.2.1.1         1287    0x80000008    0xd2b1
111.1.1.1       111.2.1.1         1458    0x80000008    0x1b8f
111.2.1.1       111.2.1.1         1458    0x80000008    0x198f
112.1.1.1       112.2.1.1         1372    0x80000008    0x287c
112.2.1.1       112.2.1.1         1372    0x80000008    0x267c

                Summary Network (Area 0.0.0.0)