- Notes, cautions, and warnings
- About this guide
- Change history
- Getting Started with Dell EMC SmartFabric OS10
- Switch with factory-installed OS10
- Baremetal switch with only ONIE installed
- Downgrade to Release 10.5.0.0 or earlier releases
- Downgrade to Release 10.5.1.0 or later releases
- Switch deployment options
- Remote access
- CLI Basics
- CONFIGURATION mode
- Check device status
- Command help
- Candidate configuration
- Copy running configuration
- Restore startup configuration
- Reload system image
- Filter show commands
- Common OS10 commands
- boot
- commit
- configure
- copy
- delete
- dir
- discard
- do
- end
- exit
- hostname
- license
- lock
- management route
- move
- no
- ping
- ping6
- reload
- show boot
- show candidate-configuration
- show environment
- show inventory
- show ip management-route
- show ipv6 management-route
- show license status
- show running-configuration
- show startup-configuration
- show system
- show version
- start
- system
- system-cli disable
- system-user linuxadmin disable
- system identifier
- terminal
- traceroute
- unlock
- username password role
- write
- Advanced CLI tasks
- Dell EMC SmartFabric OS10 zero-touch deployment
- Dell EMC SmartFabric OS10 provisioning
- SmartFabric Services
- SmartFabric Services personalities
- SmartFabric Services for leaf and spine
- SmartFabric Services Components
- SmartFabric Services logical entities
- Backup and Restore of fabric state
- Enable SmartFabric Services on the switches
- SmartFabric Services Graphical User Interface
- Configure SmartFabric Services initial setup
- Update Default Fabric, Switch Names, and Descriptions wizard
- Create Uplink for External Network Connectivity wizard
- Breakout Switch Ports wizard
- Configure Jump Host wizard
- Update Network Configuration wizard
- Onboard a Server onto the Fabric wizard
- Edit Default Fabric Settings wizard
- Restore wizard
- Fabric operations and life cycle management
- Configuring FEC using OME-M
- SFS Support for MSTP on Layer3 fabric
- SmartFabric commands
- smartfabric l3fabric enable
- smartfabric vlti
- show smartfabric cluster
- show smartfabric cluster member
- show smartfabric details
- show smartfabric networks
- show smartfabric nodes
- show smartfabric personality
- show smartfabric uplinks
- show smartfabric validation-errors
- show smartfabric discovered-server
- show smartfabric discovered-server discovered-server-interface
- show smartfabric configured-server
- show smartfabric configured-server configured-server-interface
- SmartFabric Director
- System management
- System banners
- User session management
- Telnet server
- Simple Network Management Protocol
- System clock
- Network Time Protocol
- Precision Time Protocol
- Supported platforms
- PTP installation scale and limits
- Configuration notes
- Hybrid clocking
- Configure Precision Time Protocol
- View PTP information
- Example: Configure boundary clock with L2 transport method
- Example: Configure boundary clock with IPv4 multicast transport method
- Example: Configure boundary clock with IPv4 unicast transport method
- Example: Configure end-to-end transparent clock
- Example: Configure boundary clock with IPv4 unicast transport method and L3 VLAN
- Example: Configure PTP in a multinode setup
- PTP commands
- clear ptp counters
- debug ptp
- master
- ptp announce
- ptp clock
- ptp delay-mechanism
- ptp delay-req-min-interval
- ptp domain
- ptp enable
- ptp local-priority
- ptp priority1
- ptp priority2
- ptp role
- ptp source
- ptp sync-interval
- ptp system-time enable
- ptp transport
- ptp vlan
- show ptp
- show ptp clock
- show ptp counters
- show ptp foreign-masters
- show ptp interface
- show ptp parent
- show ptp peer
- show ptp servo
- show ptp time-properties
- slave
- source
- Synchronous Ethernet (SyncE)
- Supported platforms
- Clock source selection
- Manage clock selection
- Standby clock source states
- Restrictions and limitations
- Sample configurations
- SyncE commands
- clear sync-e counters
- clear sync-e lockout
- clear sync-e switch
- clear sync-e wait-restore-time
- debug sync-e
- show debug sync-e
- show sync-e
- show sync-e counters
- show sync-e esmc
- show sync-e interface
- sync-e enable
- sync-e esmc
- sync-e hold-off-time
- sync-e lockout
- sync-e mode
- sync-e priority
- sync-e quality-level
- sync-e ssm-network-option
- sync-e switch force
- sync-e switch manual
- sync-e wait-to-restore-time
- Dynamic Host Configuration Protocol
- Packet format and options
- DHCP server
- Automatic address allocation
- Hostname resolution
- Manual binding entries
- View DHCP Information
- DHCP relay agent
- Enable or disable DHCP Option-82
- DHCP relay agent options
- DHCP snooping
- System domain name and list
- DHCP commands
- DHCP relay commands
- ip helper-address
- ipv6 helper-address
- ip dhcp-relay information-option
- ip dhcp-relay vss
- ip dhcp-relay vss-info
- ip dhcp-relay link-selection
- ip dhcp-relay source-interface
- ip dhcp-relay server-override
- ip dhcp-relay source-interface
- ip dhcp-relay server-override
- ipv6 dhcp-relay interface-id
- ipv6 dhcp-relay prefix
- ipv6 dhcp-relay remote-id
- ipv6 dhcp-relay prefix remote-id
- ipv6 dhcp-relay hostname
- ipv6 dhcp-relay interface-id
- show ip dhcp-relay
- show ipv6 dhcp-relay
- show vlt mismatch dhcp-relay
- show vlt mismatch dhcpv6-relay
- show vlt mismatch
- DHCP server commands
- DHCP snooping commands
- arp inspection
- arp inspection-trust
- arp inspection violation logging
- clear ip arp inspection statistics
- clear ip dhcp snooping binding
- ip dhcp snooping (global)
- ip dhcp snooping (interface)
- ip dhcp snooping binding
- ip dhcp snooping trust
- ip dhcp snooping verify mac-address
- show ip arp inspection database
- show ip arp inspection statistics
- show ip arp inspection logging
- show ip dhcp snooping binding
- DHCP relay commands
- DNS commands
- Containers
- Low Latency Modes
- Interfaces
- Ethernet interfaces
- Unified port groups
- Z9264F-ON port-group profiles
- Port-groups on S5200F-ON switches
- L2 mode configuration
- L3 mode configuration
- Fibre Channel interfaces
- Management interface
- VLAN interfaces
- User-configured default VLAN
- VLAN scale profile
- Loopback interfaces
- Port-channel interfaces
- Configure interface ranges
- Switch-port profiles
- Configure negotiation modes on interfaces
- Configure breakout mode
- Breakout auto-configuration
- Reset default configuration
- Forward error correction
- Energy-efficient Ethernet
- View interface configuration
- High-power optical modules
- Digital optical monitoring
- Default MTU Configuration
- Configure polling interval for Ethernet interface counters
- Interface commands
- channel-group
- default interface
- default vlan-id
- description (Interface)
- duplex
- enable dom
- enable dom traps
- feature auto-breakout
- fec
- interface breakout
- interface ethernet
- interface loopback
- interface mgmt
- interface null
- interface port-channel
- interface range
- interface vlan
- link-bundle-utilization
- mode
- mode l3
- mtu
- negotiation
- port mode Eth
- port-group
- profile
- scale-profile vlan
- show interface
- show interface phy-eth
- show inventory media
- show link-bundle-utilization
- show port-channel summary
- show port-group
- show switch-port-profile
- show system
- show vlan
- shutdown
- speed (Fibre Channel)
- speed (Management)
- stats-monitor
- switch-port-profile
- switchport access vlan
- switchport mode
- switchport trunk allowed vlan
- wavelength
- default mtu
- show default mtu
- Fibre Channel
- Fibre Channel over Ethernet
- Terminology
- Virtual fabric
- Fibre Channel zoning
- F_Port on Ethernet
- Pinning FCoE traffic to a specific port of a port-channel
- Multiswitch fabric (E Port)
- Configure multiswitch fabric (E Port)
- Verify multiswitch fabric (E Port) configuration
- Multiswitch fabric (E Port) CLI commands
- show fc fspf interface
- clear fc fabric statistics
- clear fc flow-control-statistics
- clear fc fspf statistics
- clear fc ns switch statistics
- domain-id
- e_d_tov
- fc port-mode F | E
- feature fc
- fspf cost
- fspf dead-interval
- fspf hello-interval
- fspf hold-time
- fspf retransmit-interval
- principal-priority
- r_a_tov
- show fc fabric
- show fc fabric interface
- show fc fabric statistics
- show fc flow-control-statistics
- show fc fspf database
- show fc fspf neighbor
- show fc fspf route
- show fc ns fabric
- show fc ns fabric brief
- show fc ns switch statistics
- show fc switch
- show interface fibre channel
- show vfabric
- show vfabric fspf
- Multi-hop FIP-snooping bridge
- Configuration guidelines
- NPIV Proxy Gateway cascading
- Support for untagged VLAN in FCoE
- Single FCF per vFabric
- F_Port commands
- NPG commands
- F_Port and NPG commands
- FIP-snooping commands
- FCoE commands
- clear fcoe database
- clear fcoe statistics
- fcoe delay fcf-adv
- fcoe-pinned-port
- fcoe max-sessions-per-enodemac
- fcoe priority-bits
- lldp tlv-select dcbxp-appln fcoe
- re-balance fc npg sessions vfabric
- show fcoe enode
- show fcoe fcf
- show fcoe pinned-port
- show fcoe sessions
- show fcoe statistics
- show fcoe system
- show fcoe vlan
- show npg node-interface
- show npg uplink-interface
- Debug FC commands
- Layer 2
- 802.1X
- Far-end failure detection
- Link Aggregation Control Protocol
- Link Layer Discovery Protocol
- Mandatory TLVs
- Optional TLVs
- Configure LLDP
- Example: Advertise TLVs configuration
- View LLDP configuration
- View LLDP neighbor advertisements
- LLDP-MED
- LLDP commands
- clear lldp counters
- clear lldp table
- lldp enable
- lldp holdtime-multiplier
- lldp med fast-start-repeat-count
- lldp med
- lldp med network-policy
- lldp med network-policy (Interface)
- lldp med tlv-select
- lldp port-description-tlv advertise
- lldp receive
- lldp reinit
- lldp timer
- lldp tlv-select basic-tlv
- lldp management-addr-tlv virtual-ip
- lldp tlv-select dot1tlv
- lldp tlv-select dot3tlv
- lldp transmit
- lldp vlan-name-tlv allowed vlan
- show lldp interface
- show lldp errors
- show lldp med
- show lldp neighbors
- show lldp timers
- show lldp tlv-select interface
- show lldp traffic
- show network-policy profile
- Media Access Control
- Spanning-tree protocol
- Introduction to STP
- Supported STP modes
- Change STP modes
- Mode specific functionality
- Enable and disable STP
- Backward compatibility and interoperability
- BPDU extensions
- Recover from BPDU guard violations
- MAC flush optimization
- Spanning-tree link type for rapid state transitions
- Dynamic path cost calculation
- Debug facilities
- EdgePort
- Common STP commands
- clear spanning-tree counters
- debug spanning-tree
- errdisable detect cause bpduguard
- errdisable recovery cause bpduguard
- errdisable recovery interval
- clear spanning-tree detected-protocol
- spanning-tree bpdufilter
- spanning-tree bpduguard
- spanning-tree disable
- spanning-tree guard
- spanning-tree link-type
- spanning-tree mac-flush-timer
- spanning-tree mode rstp
- spanning-tree port
- show errdisable
- show spanning-tree interface
- Rapid per-VLAN spanning-tree
- RSTP/MSTP/Rapid-PVST Force Version
- Load balance and root selection
- Enable Rapid-PVST
- Select the root bridge
- Root assignment
- Global parameters
- Rapid-PVST commands
- show spanning-tree vlan
- spanning-tree vlan cost
- spanning-tree vlan disable
- spanning-tree vlan forward-time
- spanning-tree vlan force-version
- spanning-tree vlan hello-time
- spanning-tree vlan mac-flush-threshold
- spanning-tree vlan max-age
- spanning-tree vlan priority
- spanning-tree vlan priority (Interface)
- spanning-tree vlan root
- spanning-tree rapid-pvst default behavior
- show spanning-tree compatibility-mode
- spanning-tree rapid-pvst force-version
- Rapid Spanning-Tree Protocol
- Multiple Spanning-Tree
- Configure MSTP
- Create instances
- Root selection
- Non-Dell EMC hardware
- Region name or revision
- Modify parameters
- Interface parameters
- MST commands
- instance
- name
- revision
- spanning-tree mst
- spanning-tree msti
- spanning-tree mst configuration
- spanning-tree mst disable
- spanning-tree mst force-version
- spanning-tree mst forward-time
- spanning-tree mst hello-time
- spanning-tree mst mac-flush-threshold
- spanning-tree mst max-age
- spanning-tree mst max-hops
- show spanning-tree mst
- show spanning-tree msti
- Introduction to STP
- Virtual LANs
- Private VLANs
- PVLAN components
- Limitations
- Configuration notes
- Configure a PVLAN domain
- Extend PVLAN domain to another switch
- Configure PVLAN ports in a regular VLAN
- Configure an IPv4 address and local proxy ARP on a PVLAN interface
- Convert a secondary or promiscuous port to a regular L2 port
- Delete the primary and secondary VLANs
- View PVLAN information
- Interaction with other features
- PVLAN commands
- ip local-proxy-arp
- private-vlan mapping secondary-vlans
- private-vlan mode (VLAN mode)
- private-vlan mode (Port mode)
- show interface private-vlan
- show vlan private-vlan
- show vlan private-vlan primary
- show vlan private-vlan isolated
- show vlan private-vlan community
- show vlan private-vlan interface
- show vlan private-vlan mapping
- Example: PVLAN deployment with L2-L3 boundary at the spine layer
- Example: PVLAN deployment with L2-L3 boundary at the leaf layer
- Port monitoring
- Layer 3
- Virtual routing and forwarding
- Configure management VRF
- Configure non-default VRF instances
- VRF configuration
- View VRF instance information
- Static route leaking
- Route leaking
- VRF commands
- interface management
- ip domain-list vrf
- ip domain-name vrf
- ip vrf
- ip ftp vrf
- ip host vrf
- ip http vrf
- ip name-server vrf
- ip route-import
- ip route-export
- ipv6 route-import
- ipv6 route-export
- ip scp vrf
- ip sftp vrf
- ip tftp vrf
- ip vrf management
- match source-protocol
- redistribute imported-bgp-routes
- redistribute imported-ospf-routes
- redistribute l2vpn evpn
- show hosts vrf
- show ip vrf
- update-source-ip
- Bidirectional Forwarding Detection
- BFD session states
- BFD three-way handshake
- BFD configuration
- Configure BFD globally
- BFD for BGP
- BFD for OSPF
- BFD for Static routes
- Establishing BFD Sessions for IPv4 Static Routes
- Establishing BFD Sessions for IPv4 Static Routes in a non-default VRF instance
- Changing IPv4 static route session parameters
- Disabling BFD for IPv4 Static Routes
- Establishing BFD Sessions for IPv6 Static Routes
- Establishing BFD Sessions for IPv6 Static Routes in a non-default VRF instance
- Changing IPv6 static route session parameters
- Enable BFD for specific static routes
- Disabling BFD for IPv6 Static Routes
- BFD commands
- Border Gateway Protocol
- Sessions and peers
- Martian addresses
- Route reflectors
- Multiprotocol BGP
- Attributes
- Disable announcement of ASN values
- Selection criteria
- Weight and local preference
- Multiexit discriminators
- Origin
- AS path and next-hop
- Best path selection
- More path support
- Advertise cost
- 4-Byte AS numbers
- AS number migration
- Graceful restart
- Configure Border Gateway Protocol
- Enable BGP
- BGP over unnumbered interfaces
- Auto-unnumbered interfaces for BGP
- Configure Dual Stack
- Configure administrative distance
- Peer templates
- Neighbor fall-over
- Configure password
- Fast external fallover
- Passive peering
- Local AS
- AS number limit
- Redistribute routes
- Additional paths
- MED attributes
- Local preference attribute
- Weight attribute
- Enable multipath
- Route-map filters
- Route reflector clusters
- Aggregate routes
- Confederations
- Route dampening
- Timers
- Neighbor soft-reconfiguration
- Redistribute iBGP route to OSPF
- View BGP routes information
- Example - BGP in a VLT topology
- Example - Three-tier CLOS topology with eBGP
- Debug BGP
- Configuring BGP template
- BGP commands
- activate
- add-path
- add-path
- address-family
- advertisement-interval
- advertisement-start
- aggregate-address
- allowas-in
- always-compare-med
- as-notation
- bestpath as-path
- bestpath med
- bestpath router-id
- bgp dampening
- bgp redistribute-internal
- clear ip bgp
- clear ip bgp *
- clear ip bgp dampening
- clear ip bgp flap-statistics
- connection-retry-timer
- confederation
- client-to-client
- cluster-id
- debug ip bgp
- description
- default-metric
- default-originate
- distance bgp
- distribute-list
- bgp default local-preference
- ebgp-multihop
- enforce-first-as
- fall-over
- fast-external-fallover
- graceful-restart
- inherit
- inherit template
- ipv6 bgp unnumbered
- listen
- local-as
- log-neighbor-changes
- maximum-paths
- maximum-prefix
- neighbor
- network
- next-hop-self
- non-deterministic-med
- outbound-optimization
- password
- redistribute
- remote-as
- remove-private-as
- route-map
- route-reflector-client
- router bgp
- router-id
- send-community
- sender-side-loop-detection
- show ip bgp
- show ip bgp community
- show ip bgp community-list
- show ip bgp dampened-paths
- show ip bgp extcommunity-list
- show ip bgp flap-statistics
- show ip bgp ipv4 unicast
- show ip bgp ipv6 unicast
- show ip bgp neighbors
- show ip bgp peer-group
- show ip bgp summary
- show ip route
- show ipv6 route
- soft-reconfiguration inbound
- soft-reconfiguration inbound
- template
- timers
- update-source
- vrf
- weight
- Equal cost multi-path
- IPv4 routing
- IPv6 routing
- Enable or disable IPv6
- IPv6 addresses
- Stateless autoconfiguration
- Neighbor Discovery
- Duplicate address discovery
- Static IPv6 routing
- IPv6 destination unreachable
- IPv6 hop-by-hop options
- View IPv6 information
- IPv6 RA Guard
- Configure IPv6 RA guard
- IPv6 RA guard commands
- clear ipv6 nd ra-guard statistics
- device-role
- ipv6 nd ra-guard attach-policy
- ipv6 nd ra-guard enable
- ipv6 nd ra-guard logging enable
- ipv6 nd ra-guard policy
- mtu
- managed-config-flag
- match ra
- other-config-flag
- reachable-time
- retrans-timer
- router-lifetime
- router-preference maximum
- show config
- show ipv6 nd ra-guard policy
- show ipv6 nd ra-guard statistics
- show ipv6 nd ra-guard violation-details
- show vlt mismatch
- IPv6 commands
- clear ipv6 neighbors
- clear ipv6 route
- ipv6 address
- ipv6 address autoconfig
- ipv6 address dhcp
- ipv6 enable
- ipv6 address eui-64
- ipv6 address link-local
- ipv6 hop-by-hop
- ipv6 nd dad
- ipv6 nd hop-limit
- ipv6 nd managed-config-flag
- ipv6 nd max-ra-interval
- ipv6 nd mtu
- ipv6 nd other-config-flag
- ipv6 nd prefix
- ipv6 nd ra-lifetime
- ipv6 nd reachable-time
- ipv6 nd retrans-timer
- ipv6 nd send-ra
- ipv6 route
- ipv6 unreachables
- show ipv6 neighbors
- show ipv6 route
- show ipv6 interface brief
- Open shortest path first
- Autonomous system areas
- Areas, networks, and neighbors
- Router types
- Designated and backup designated routers
- Link-state advertisements
- Router priority
- Shortest path first throttling
- Redistribute routes
- OSPFv2
- Enable OSPFv2
- Enable OSPFv2 in a non-default VRF instance
- Assign router identifier
- Stub areas
- Passive interfaces
- Fast convergence
- Interface parameters
- Default route
- Summary address
- Graceful restart
- OSPFv2 authentication
- Troubleshoot OSPFv2
- Debug OSPF
- OSPFv2 commands
- area default-cost
- area nssa
- area range
- area stub
- auto-cost reference-bandwidth
- clear ip ospf process
- clear ip ospf statistics
- debug ip ospfv2
- default-information originate
- default-metric
- fast-converge
- graceful-restart
- ip ospf area
- ip ospf authentication-key
- ip ospf cost
- ip ospf dead-interval
- ip ospf hello-interval
- ip ospf message-digest-key
- ip ospf mtu-ignore
- ip ospf network
- ip ospf passive
- ip ospf priority
- ip ospf retransmit-interval
- ip ospf transmit-delay
- log-adjacency-changes
- max-metric router-lsa
- maximum-paths
- redistribute
- router-id
- router ospf
- show ip ospf
- show ip ospf asbr
- show ip ospf database
- show ip ospf database asbr-summary
- show ip ospf database external
- show ip ospf database network
- show ip ospf database nssa external
- show ip ospf database opaque-area
- show ip ospf database opaque-as
- show ip ospf database opaque-link
- show ip ospf database router
- show ip ospf database summary
- show ip ospf interface
- show ip ospf routes
- show ip ospf statistics
- show ip ospf topology
- summary-address
- timers lsa arrival
- timers spf
- timers throttle lsa all
- OSPFv3
- Enable OSPFv3
- Enable OSPFv3 in a non-default VRF instance
- Assign Router ID
- Configure Stub Areas
- Enable Passive Interfaces
- Interface OSPFv3 Parameters
- Default route
- OSPFv3 IPsec authentication and encryption
- Troubleshoot OSPFv3
- OSPFv3 Commands
- area authentication
- area encryption
- area stub
- auto-cost reference-bandwidth
- clear ipv6 ospf process
- clear ipv6 ospf statistics
- debug ip ospfv3
- default-information originate
- ipv6 ospf area
- ipv6 ospf authentication
- ipv6 ospf cost
- ipv6 ospf dead-interval
- ipv6 ospf encryption
- ipv6 ospf hello-interval
- ipv6 ospf mtu-ignore
- ipv6 ospf network
- ipv6 ospf passive
- ipv6 ospf priority
- log-adjacency-changes
- maximum-paths
- redistribute
- router-id
- router ospfv3
- show ipv6 ospf
- show ipv6 ospf database
- show ipv6 ospf interface
- show ipv6 ospf neighbor
- show ipv6 ospf statistics
- timers spf (OSPFv3)
- Object tracking manager
- Policy-based routing
- Virtual Router Redundancy Protocol
- Virtual routing and forwarding
- Multicast
- Important notes
- Configure multicast routing
- Unknown multicast flood control
- Multicast Commands
- Internet Group Management Protocol
- Standards compliance
- Important notes
- Supported IGMP versions
- Query interval
- Last member query interval
- Maximum response time
- IGMP immediate leave
- Select an IGMP version
- View IGMP-enabled interfaces and groups
- IGMP snooping
- IGMP commands
- clear ip igmp groups
- ip igmp immediate-leave
- ip igmp last-member-query-interval
- ip igmp query-interval
- ip igmp query-max-resp-time
- ip igmp snooping enable
- ip igmp snooping
- ip igmp snooping fast-leave
- ip igmp snooping last-member-query-interval
- ip igmp snooping mrouter
- ip igmp snooping querier
- ip igmp snooping query-interval
- ip igmp snooping query-max-resp-time
- ip igmp version
- show ip igmp groups
- show ip igmp interface
- show ip igmp snooping groups
- show ip igmp snooping groups detail
- show ip igmp snooping interface
- show ip igmp snooping mrouter
- show ip igmp snooping summary
- Multicast Listener Discovery Protocol
- MLD snooping
- MLD snooping commands
- ipv6 mld snooping
- ipv6 mld snooping enable
- ipv6 mld snooping fast-leave
- ipv6 mld snooping last-member-query-interval
- ipv6 mld snooping mrouter
- ipv6 mld snooping querier
- ipv6 mld snooping query-interval
- ipv6 mld query-max-resp-time
- ipv6 mld version
- show ipv6 mld snooping groups
- show ipv6 mld snooping groups detail
- show ipv6 mld snooping interface
- show ipv6 mld snooping mrouter
- show ipv6 mld snooping summary
- Multicast snooping on VLANs
- Protocol Independent Multicast
- PIM terminology
- Standards compliance
- PIM-SM
- PIM-SSM
- Configure expiry timers for S, G entries
- Configure static rendezvous point
- Configure dynamic RP using the BSR mechanism
- Configure designated router priority
- Update RP mapping cache with new RP configuration
- PIM join filters
- PIM neighbor filters
- PIM register filters
- PIM commands
- clear ip pim rp-mapping
- clear ip pim tib
- ip multicast-routing
- ip pim bsr-candidate
- ip pim bsr-candidate-timers
- ip pim bsr-timeout
- ip pim dr-priority
- ip pim join-filter
- ip pim neighbor-filter
- ip pim query-interval
- ip pim register-filter
- ip pim rp-address
- ip pim rp-candidate
- ip pim rp-candidate-timers
- ip pim sparse-mode
- ip pim sparse-mode sg-expiry-timer
- ip pim ssm-range
- show ip pim bsr-router
- show ip pim interface
- show ip pim mcache
- show ip pim neighbor
- show ip pim register-filter
- show ip pim rp
- show ip pim ssm-range
- show ip pim summary
- show ip pim tib
- show ip rpf
- Anycast RP using PIM
- Sample configuration: Multicast VRF using PIM-SM
- VLT multicast routing
- VXLAN
- VXLAN concepts
- VXLAN as NVO solution
- Configure VXLAN
- L3 VXLAN route scaling
- DHCP relay on VTEPs
- View VXLAN configuration
- VXLAN MAC addresses
- VXLAN commands
- hardware overlay-routing-profile
- interface virtual-network
- ip virtual-router address
- ip virtual-router mac-address
- member-interface
- nve
- remote-vtep
- show hardware overlay-routing-profile mode
- show interface virtual-network
- show nve remote-vtep
- show nve remote-vtep counters
- show nve vxlan-vni
- show virtual-network
- show virtual-network counters
- show virtual-network interface counters
- show virtual-network interface
- show virtual-network vlan
- show vlan (virtual network)
- source-interface loopback
- virtual-network
- virtual-network untagged-vlan
- vxlan-vni
- VXLAN MAC commands
- clear mac address-table dynamic nve remote-vtep
- clear mac address-table dynamic virtual-network
- show mac address-table count extended
- show mac address-table count nve
- show mac address-table count virtual-network
- show mac address-table extended
- show mac address-table nve
- show mac address-table virtual-network
- Example: VXLAN with static VTEP
- BGP EVPN for VXLAN
- BGP EVPN compared to static VXLAN
- VXLAN BGP EVPN operation
- Configure BGP EVPN for VXLAN
- VXLAN BGP EVPN routing
- BGP EVPN with VLT
- VXLAN BGP commands
- VXLAN EVPN commands
- Example: VXLAN with BGP EVPN
- Example: VXLAN BGP EVPN — Multiple AS topology
- Example: VXLAN BGP EVPN — Centralized L3 gateway
- Example: VXLAN BGP EVPN — Border leaf gateway with asymmetric IRB
- Example: VXLAN BGP EVPN—Symmetric IRB
- Example - VXLAN BGP EVPN symmetric IRB with unnumbered BGP peering
- Example: Migrating from Asymmetric IRB to Symmetric IRB
- Example - Route leaking across VRFs in a VXLAN BGP EVPN symmetric IRB topology
- Controller-provisioned VXLAN
- UFT modes
- Security
- Switch security
- User management
- User accounts
- Privilege levels
- Passwords for user accounts
- User management commands
- disable
- enable
- enable password priv-lvl
- password-attributes
- password-attributes max-retry lockout-period console-exempt
- privilege
- service simple-password
- service obscure-password
- show users
- show privilege
- show running-configuration privilege
- system-user linuxadmin password
- system-user linuxadmin disable
- userrole inherit
- username password role
- AAA
- Boot security
- Switch management access
- SSH server
- RESTCONF API
- Restrict SNMP access
- Limit concurrent login sessions
- Virtual terminal line ACLs
- Initiate an SSH session with another switch
- Switch management access
- ip ssh client cli enable
- ip ssh server enable
- ip ssh server challenge-response-authentication
- ip ssh server cipher
- ip ssh server hostbased-authentication
- ip ssh server kex
- ip ssh server mac
- ip ssh server password-authentication
- ip ssh server port
- ip ssh server pubkey-authentication
- ip ssh server vrf
- show ip ssh
- ssh
- show crypto ssh-key
- username sshkey
- username sshkey filename
- crypto ssh-key generate
- login concurrent-session limit
- line vty
- ipv6 access-class
- ip access-class
- Switch management statistics
- X.509v3 certificates
- X.509v3 concepts
- Public key infrastructure
- Manage CA certificates
- Certificate revocation
- Request and install host certificates
- Self-signed certificates
- Security profiles
- Cluster security
- SSH Smart Card Authentication
- Remote user authentication with a password
- Local user authentication with a password
- Local user authentication without a password
- General X.509v3 configuration for X.509v3 SSH authentication
- Configure remote user authentication with a password
- Configure local user authentication with a password
- Configure local user authentication without a password
- Security profile settings used by X.509v3 authentication
- Example: Configure RADIUS over TLS with X.509v3 certificates
- X.509v3 commands
- certificate
- cluster security-profile
- crypto ca-cert delete
- crypto ca-cert install
- crypto cdp add
- crypto cdp delete
- crypto cert delete
- crypto cert generate
- crypto cert install
- crypto crl delete
- crypto crl install
- crypto fips enable
- crypto security-profile
- peer-name-check
- revocation-check
- show crypto ca-certs
- show crypto cdp
- show crypto cert
- show crypto crl
- ip ssh server x509v3-authentication security-profile
- ocsp-check [ocsp-url]
- User management
- Network security
- Access control lists
- DHCP snooping
- 802.1X port access control
- Port security
- Port security commands
- clear mac address-table secure
- errdisable recovery cause
- errdisable reset cause
- mac-learn
- mac-learn limit violation
- mac-move allow
- mac-move violation
- mac address-table static
- show switchport port-security
- switchport port-security (interface)
- switchport port-security (global)
- sticky
- aging
- show mac address-table secure
- show errdisable
- show mac address-table count
- Port security commands
- Switch security
- OpenFlow
- OpenFlow logical switch instance
- OpenFlow controller
- OpenFlow version 1.3
- Ports
- Flow table
- Group table
- Meter table
- Instructions
- Action set
- Action types
- Counters
- OpenFlow protocol
- Connection setup TCP
- Supported controllers
- Flow table modification messages
- Message types
- Flow match fields
- Action structures
- Capabilities supported by the data path
- Multipart message types
- Switch description
- Property type
- Group configuration
- Controller roles
- Packet-in reasons
- Flow-removed reasons
- Error types from switch to controller
- OpenFlow use cases
- Configure OpenFlow
- OpenFlow commands
