VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2

PDF

clear mac address-table dynamic virtual-network

Clears MAC addresses learned on all or a specified VXLAN virtual network.

Syntax
clear mac address-table dynamic virtual-network [interface {ethernet node/slot/port:subport | port-channel number} | local | vn-id [address mac-address | local]]
Parameters
interface ethernet node/slot/port[:subport]
Clear all MAC addresses learned on the specified interface.
interface port-channel number
Clear all MAC addresses learned on the specified port channel.
virtual-network vn-id
Clear all MAC addresses learned on the specified virtual network, from 1 to 65535.
local
Clear only locally-learned MAC addresses.
vn-id
Clear learned MAC addresses on the specified virtual network, from 1 to 65535.
vn-id local
Clear locally learned MAC addresses on the specified virtual network, from 1 to 65535.
vn-id address mac-address
Clear only the MAC address entry learned in the specified virtual network. Enter the MAC address in EEEE.EEEE.EEEE format.
Default
Not configured
Command mode
EXEC
Usage information
Use this command with no optional parameters to delete all dynamic MAC address entries that are learned only on virtual-network bridges from the MAC address table. This command does not delete MAC address entries learned on simple VLAN bridges. Use the show mac address-table virtual-network command to display the MAC addresses learned on a virtual network.
Example
OS10# clear mac address-table dynamic virtual-network
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\