VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2

PDF

show evpn vrf l3-vni

Displays the configuration of the tenant VRF instances used for symmetric IRB.

Syntax
show evpn vrf l3-vni [tenant-vrf-name]
Parameters
tenant- vrf-name — (Optional) Enter the name of a non-default tenant VRF instance.
Default
Not configured
Command mode
EXEC
Usage information
Use the show evpn vrf l3-vni command to display the configuration settings of each tenant VRF with its unique VXLAN VNI. Use the show evpn vrf command to display the tenant VRF instances used to exchange BGP EVPN routes in VXLANs.
Example
OS10# show evpn vrf l3-vni

VRF : vrf_30, State : up
 L3-VNI              : 3030
 Route-Distinguisher : 1:80.80.1.1:3030(auto)
 Route-Targets       : 0:200:268438486(auto) both
 Remote VTEP         : 4.4.4.4

VRF : vrf_40, State : up
 L3-VNI              : 4040
 Route-Distinguisher : 1:80.80.1.1:4040(auto)
 Route-Targets       : 0:200:268439496(auto) both
 Remote VTEP         : 4.4.4.4

VRF : vrf_50, State : up
 L3-VNI              : 5050
 Route-Distinguisher : 1:80.80.1.1:5050(auto)
 Route-Targets       : 0:200:268440506(auto) both
 Remote VTEP         : 4.4.4.4
OS10# show evpn vrf
VXLAN-VNI  EVI  Virtual-Network-Instance  VRF-Name
30         30   30                        vrf_30
40         40   40                        vrf_40

OS10# show evpn vrf l3-vni vrf_30 
VRF : vrf_30, State : up
 L3-VNI              : 3030
 Route-Distinguisher : 1:80.80.1.1:3030(auto)
 Route-Targets       : 0:200:268435557(auto) both
 Remote VTEP         : 4.4.4.4
Supported releases
10.5.1.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\