VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2

PDF

show mac address-table virtual-network

Displays the MAC addresses learned on all or a specified virtual network.

Syntax
show mac address-table virtual-network [vn-id | local | remote | static | dynamic | address mac-address | interface {ethernet node/slot/port:subport | port-channel number}]
Parameters
vn-id
Display only information about the specified virtual network.
local
Display only locally learned MAC addresses.
remote
Display only remote MAC addresses.
static
Display only static MAC addresses.
dynamic
Display only dynamic MAC addresses.
address mac-address
Display only information about the specified MAC address. Enter the MAC address in EEEE.EEEE.EEEE format.
interface ethernet node/slot/port[:subport]
Display only MAC addresses learned on the specified interface.
interface port-channel number
Display only MAC addresses learned on the specified port channel.
Default
Not configured
Command mode
EXEC
Usage information
Use this command to verify the MAC addresses learned on VXLAN virtual networks. By default, MAC learning from a remote VTEP is enabled.
Example
OS10# show mac address-table virtual-network
Virtual-Network VlanId   MAC Address         Type   Interface/Remote-VTEP
----------------------------------------------------------------------
10000                    00:00:00:00:00:11   dynamic  ethernet1/1/31:1
10000           100      00:00:00:00:00:44   dynamic  port-channel1000
10000           100      00:00:00:00:00:55   dynamic  port-channel10
10000                    00:00:00:00:00:77   dynamic  VxLAN(32.1.1.1)
10000           100      34:a0:a0:a1:a2:f6   dynamic  port-channel10
20000           300      00:00:00:00:00:22   dynamic  port-channel100
20000           300      00:00:00:00:00:33   dynamic  port-channel1000
20000           300      00:00:00:00:00:66   dynamic  port-channel10
20000                    00:00:00:00:00:88   dynamic  VxLAN(32.1.1.1)
20000           300      34:a0:a0:a1:a2:f6   dynamic  port-channel10
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\