VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2

PDF

show nve remote-vtep

Displays information about remote VXLAN tunnel endpoints.

Syntax
show nve remote-vtep [ip-address | summary | counters]
Parameters
ip-address
Display detailed information about a specified remote VTEP.
summary
Display summary information about remote VTEPs.
counters
Display statistics on remote VTEP traffic.
Default
Not configured
Command mode
EXEC
Usage information
Use this command to display the IP address, operational state, and configured VXLANs for each remote VTEP. The remote MAC learning and unknown unicast drop settings used for each VXLAN ID (VNI) also display.
Example
OS10# show nve remote-vtep summary
Remote-VTEP       State
-----------------------
2.2.2.2           up
OS10# show nve remote-vtep
Codes: DP - MAC-learn Dataplane, CP - MAC-learn Controlplane, UUD - Unknown-Unicast-Drop
IP Address: 2.2.2.2,  State: up, Encap: VxLAN
   VNI list: 10000(DP), 200(DP), 300(DP)
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\