VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2

PDF

show virtual-network interface counters

Displays packet statistics for a member port, port channel, or VLAN in VXLAN virtual networks.

Syntax
show virtual-network interface {ethernet node/slot/port:subport | port-channel number} [vlan vlan-id] counters
Parameters
interface ethernet node/slot/port[:subport]
Enter the port information for an Ethernet interface.
interface port-channel number
Enter a port-channel number, from 1 to 128.
vlan vlan-id
(Optional) Enter a VLAN ID, from 1 to 4093.
Default
Not configured
Command mode
EXEC
Usage information

Use this command to monitor the packet throughput on a port interface that is a member of a VXLAN virtual network. Assign a VLAN member interface to only one virtual network. To clear VXLAN packet counters on a member port or VLAN members of a virtual network, use the clear virtual-network interface {ethernet node/slot/port:subport | port-channel number} [vlan vlan-id] counters command.

Example
OS10# show virtual-network interface 1/1/3 vlan 100 counters
Virtual-Network      Input (Packets/Bytes)       Output (Packets/Bytes)
2000                 457/3570                    277/13709
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\