VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2

PDF

show virtual-network interface

Displays the VXLAN virtual networks and server VLANs where a port is assigned.

Syntax
show virtual-network interface {ethernet node/slot/port:subport | port-channel number}
Parameters
interface ethernet node/slot/port[:subport]
Enter the port information for an Ethernet interface.
interface port-channel number
Enter a port-channel number, from 1 to 128.
Default
Not configured
Command mode
EXEC
Usage information
Use this command to verify the VXLAN VLANs where an Ethernet port connected to downstream servers is a member.
Example
OS10# show virtual-network interface ethernet 1/1/1
Interface          Vlan      Virtual-network
ethernet1/1/1      100         1000
ethernet1/1/1      200         2000
ethernet1/1/1      300         3000
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\