Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell G5 SE 5505 Service Manual

Installing the power-adapter port

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.

Image: Installing the power-adapter port

Steps

  1. Place the power-adapter port into the slot and adhere the power-adapter port cable on the palm rest and keyboard assembly.
  2. Connect the power-adapter port cable to the system board.
  3. Adhere the mylar that covers the power-adapter port cable connection on the system board.
  4. Align and place the power-adapter port bracket over the power-adapter port.
  5. Replace the two screws (M2x3) to secure the power-adapter port bracket to the system board.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\