Dell iDRAC Service Module 5.0.1.0 User’s Guide

Preinstallation requirements for Linux operating systems

To install iDRAC Service Module (iSM) on systems running a supported Linux operating system, run the setup.sh command.

Ensure that you fulfill the following basic functional requirements:

• OS to iDRAC Pass-through is enabled automatically after installing iSM
• The IPv4/IPv6 network stack is enabled in the host operating system
• The USB subsystem is enabled
• udev is enabled; required to start iSM automatically

For more information about iDRAC, see the latest Integrated Dell Remote Access Controller User’s Guide at Dell.com/support.