PowerEdge Servers Error and Event Messages Reference Guide

BAR—Backup/Restore Event Messages

BAR001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Export System Profile requested.
Detailed Description: A system profile export operation has been requested.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Validating vFlash Backup partition.
Detailed Description: The system profile Backup partition detection operation is in progress.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Preparing vFlash Backup partition.
Detailed Description: The Backup partition is being created for storing the backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting Hardware Inventory information.
Detailed Description: Hardware Inventory data is being collected and copied into the backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting Lifecycle Controller data.
Detailed Description: The Lifecycle Controller data is being collected and copied into the backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Finalizing Backup file.
Detailed Description: The system profile backup file is being finalized and closed.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Export System Profile completed.
Detailed Description: System profile export operation is successfully completed.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Invalid Backup file passphrase provided.
Detailed Description: The passphrase provided is invalid.
Recommended Response Action: Verify the request parameters and retry. Check passphrase for rule validity. NOTE: A valid passphrase contains 8 to 32 characters. It must include a combination of uppercase and lowercase letters, numbers, and symbols without spaces.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Valid vFlash media not present.
Detailed Description: The vFlash media is not present on the system.
Recommended Response Action: Insert the appropriate vFlash media in the designated vFlash portal, enable and initialize it, and retry.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to create Backup partition on vFlash media.
Detailed Description: The Backup partition creation operation did no complete successfully.
Recommended Response Action: Make sure that the vFlash media is not write-protected. Enable and initialize the vFlash media, retry backup. If that fails Try new vFlash media or use the Network Share option(s).
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect Hardware Inventory information.
Detailed Description: Hardware Inventory data collection and export did not complete successfully.
Recommended Response Action: Enter Lifecycle Controller GUI by pressing F10 during boot, and select exit and reboot option in the GUI to instantiate the database, if Collect System Inventory on Restart (CSIOR) is not enabled. If the hardware inventory database is present, restart the Integrated Remote Access Controller (iDRAC)and retry.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect Lifecycle Controller data.
Detailed Description: Lifecycle Controller data collection and export has failed.
Recommended Response Action: Do the following: 1) Download and apply the Dell Update Package (DUP) for Lifecycle Controller/Unified Server Configurator (USC). 2) Run System Services to update the database if CSIOR is not enabled. 3) Reboot the system and retry. If the issue persists after performing these operations, download the Field Service Repair software and repair the Lifecycle Controller. Download and install all the DUPs for Lifecycle Controller/USC, diagnostics, driver packs, and device firmware of all the devices of the host system.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Host System Shutdown unsuccessful.
Detailed Description: The request to shut the Host system down did not complete successfully.
Recommended Response Action: Restart the Integrated Remote Access Controller (iDRAC) and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Backup file or partition access error.
Detailed Description: Unable to access the server profile Backup file and the operation cannot continue. This can be due to a media error or loss of connectivity.
Recommended Response Action: If using vFlash media replace media and try again. If a network share, make sure there is connectivity to and existence of the destination.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Backup file data processing error.
Detailed Description: The Backup file information was not properly processed and the operation cannot continue. This can be due to resource constraints within the processing environment. If the network share is read only, this error will be thrown also.
Recommended Response Action: If this is backup to network share, check to make sure network share is read/write accessible. Restart the Integrated Remote Access Controller (iDRAC) and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Import System Profile requested.
Detailed Description: A system profile import operation has been requested.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Backup file validation requested.
Detailed Description: A system profile backup file validation has been requested.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Backup file validation completed.
Detailed Description: A system profile backup file validation request has completed.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Validating Restore operation, allow several minutes for this to complete.
Detailed Description: A system profile backup file validation is in progress.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Lifecycle Controller data.
Detailed Description: The Lifecycle Controller data is being imported from the backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Insufficient space on network share.
Detailed Description: The system profile export could not complete successfully as there is insufficient space on the network share or connectivity was lost.
Recommended Response Action: Delete files to free up 384 MB of space on the current network share, or specify another destination that has enough space.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR022

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System powering up to perform component updates.
Detailed Description: The host system is powering up to perform component firmware and configuration restoration.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR023

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Starting component updates.
Detailed Description: The process is entering the component update phase of the restore operation.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR024

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Initializing Restore operation.
Detailed Description: The restoration environment is being initialized.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Component Firmware.
Detailed Description: For each component with firmware, an update is in progress.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Component Configuration.
Detailed Description: The configuration is being set for each component.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR027

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Host System Component Restore complete, shutting down Host System.
Detailed Description: The component restoration on the host system is complete. The Host System will shutdown.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Host System Component Restore completed with errors, shutting down Host System.
Detailed Description: The component restoration on the host system has completed, but there were errors. The Host System will shutdown.
Recommended Response Action: View configuration data and request attributes update for the components or retry system profile import.
Category: Configuration (BAR = Backup/Restore)
Severity: Warning
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR029

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Integrated Remote Access Controller firmware.
Detailed Description: The Integrated Remote Access Controller firmware and configuration import is in progress.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR030

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Import System Profile Complete, restarting Integrated Remote Access Controller.
Detailed Description: The import system profile is complete. iDRAC restarts to complete restore.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR031

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: RESERVED.
Detailed Description: RESERVED.
Recommended Response Action: RESERVED.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR032

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Invalid system profile Backup file.
Detailed Description: The system profile backup file validation did not complete successfully.
Recommended Response Action: Do one of the following: 1) An incorrect passphrase may have been entered, correct the input and retry the operation. 2) Download a valid backup image of the host system and retry. 3) Reboot the Integrated Remote Access Controller (iDRAC) and retry. 4) Download a new firmware image for the iDRAC and retry.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR033

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to Restore Lifecycle Controller data.
Detailed Description: A Lifecycle Controller internal data import operation did not complete successfully.
Recommended Response Action: Do the following: 1) Download and apply the Dell Update Package for Lifecycle Controller/Unified Server Configurator (USC). 2) Run System Services to update the database if CSIOR is not enabled. 3) Reboot the system and retry the operation. If these response actions do not resolve the issue, download the Field Service Repair software and repair the Lifecycle Controller. Download and install all the DUPs for Lifecycle Controller/USC, diagnostics, driver packs, and device firmware of all the devices of the host system.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR034

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to Restore Integrated Remote Access Controller firmware.
Detailed Description: The Integrated Remote Access Controller(iDRAC) firmware import did not complete successfully.
Recommended Response Action: Download the firmware for the Integrated Remote Access Controller(iDRAC) and apply it.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR035

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to Restore Integrated Remote Access Controller configuration.
Detailed Description: The Integrated Remote Access Controller (iDRAC) Configuration import did not complete successfully.
Recommended Response Action: Manually reset the Integrated Remote Access Controller (iDRAC) configuration.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR036

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Reset or Lifecycle Controller Actions Canceled, System Profile Failure Recovery initiated.
Detailed Description: A system profile import did not complete successfully and has left the system in an unusable state. Attempting to setup the environment for normal operation.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR037

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Reset or Lifecycle Controller Actions Canceled, System Profile Failure Recovery completed.
Detailed Description: Adjustments to Lifecycle and Integrated Remote Access Controller environments are complete.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR038

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Cancel.
Detailed Description: Cancel the operation in progress.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR039

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: License not present.
Detailed Description: The license required for operation is not present.
Recommended Response Action: Use supported vFlash media and licensing for this feature, and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR040

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to access vFlash.
Detailed Description: Access to the vFlash media is not possible, or has been denied.
Recommended Response Action: Make sure the vFlash SD media is enabled, not write protected, and initialized. Retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR041

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Shutdown.
Detailed Description: Shutting down host system.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR042

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Lifecycle Controller Disabled.
Detailed Description: Lifecycle Controller/System services are not available. There is another operation using the resources at this time.
Recommended Response Action: Wait for the other operation to release the resources, as indicated by the System Services option presence and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR043

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Timeout waiting for Unified Server Configurator or Lifecycle Controller to exit.
Detailed Description: A timeout occurred waiting for the Unified Server Configurator (USC) or Lifecycle Controller (LC) to exit.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR044

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Waiting for the host system to successfully get turned off.
Detailed Description: Waiting for the host system to successfully get turned off.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR045

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Powering down the Host System for Integrated Remote Access Controller Restore.
Detailed Description: The host system is powering down to facilitate the import of the Integrated Remote Access Controller system profile.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR046

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Host System will power up approximately 10 minutes after Integrated Remote Access Controller Restore (iDRAC).
Detailed Description: The Integrated Remote Access Controller (iDRAC) is preparing to switch over to the recently loaded firmware. During this switch over, the connection to iDRAC is lost. The server will startup after iDRAC restarts.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR047

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Profile operation canceled by user.
Detailed Description: The System Profile operation was canceled as part of a clean up operation performed during a restart of the Integrated Remote Access Controller.
Recommended Response Action: Resubmit the System Profile operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR048

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Service Tag not present.
Detailed Description: The server motherboard does not have a Service Tag assigned, the operation cannot continue.
Recommended Response Action: Perform a System Profile import from a previous backup file. If no backup file is available.If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR049

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Automatic Host System power up setup failed.
Detailed Description: The automatic Host System power up request has erred and the system will not power up after the Integrated Remote Access Controller has restarted.
Recommended Response Action: As indicated by the job status, wait for restore to complete. After the status displays Complete or Failed, wait for a few minutes for the Integrated Remote Access Controller (iDRAC) to restart. After restart, power on the Host System using iDRAC.
Category: Configuration (BAR = Backup/Restore)
Severity: Warning
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR050

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Performing Firmware Restore for Device : arg1

Arguments

arg1 = device name

Detailed Description

The firmware update for the specified device in progress.

Recommended Response Action

No response action is required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR051

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Performing Component Configuration Restore for Device : arg1

Arguments

arg1 = device name

Detailed Description

The configuration import for the specified device is in progress.

Recommended Response Action

No response action is required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR052

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Firmware update cannot be performed for Device: arg1

Arguments

arg1 = device name

Detailed Description

The required device firmware was not found, and the update cannot continue. The device firmware is either not present on the firmware storage partition or does not match the version stored in the configuration information database. No response action is required, however obtaining and installing the update package for the device indicated will update the firmware storage partition. A backup of the server profile is recommended after updating.

Recommended Response Action

No response action is required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR053

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Restoring Firmware on Device: arg1

Arguments

arg1 = device name

Detailed Description

Restoring device firmware on the device identified in the message.

Recommended Response Action

No response action is required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR054

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Reset or Lifecycle Controller Actions Canceled, System Profile Failure Recovery unsuccessful.
Detailed Description: The attempt to clean up after an unsuccessful Backup/Restore of a system profile operation has not been successful. The Lifecycle Controller/System Services related operations may not execute as expected until the system is properly restored to a functional configuration.
Recommended Response Action: Enter the iDRAC configuration utility. Select the System Services option in the main selection screen. Choose the Cancel Lifecycle Controller Actions / Cancel System Services operation and follow the directions to ensure this operation is performed. If Cancel Lifecycle Controller Actions / Cancel System Services is not available, remove power from the system, wait 1 minute and reapply power. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR055

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Previously stored configuration values not applied to Device: arg1.

Arguments

arg1 = device name

Detailed Description

Attempted configuration import was not successful for the specified device.

Recommended Response Action

The system event log captures the values that were not set, and must be reset manually.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR056

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Component Configuration Restored on Device : arg1.

Arguments

arg1 = device name

Detailed Description

The configuration import was successful for the specified device.

Recommended Response Action

No response action is required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR057

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Some of the configuration values not applied to Device: arg1

Arguments

arg1 = device name

Detailed Description

The configuration import was completed, but some of the imported values were not set correctly.

Recommended Response Action

The system event log captures the values that were not set, and they must be reset manually.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR058

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Validating NFS destination access.
Detailed Description: The system profile import or export network destination is being tested for access.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR059

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Validating CIFS destination access.
Detailed Description: The system profile import or export network destination is being tested for access.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR060

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting firmware inventory information.
Detailed Description: Collecting firmware inventory and copying it into the system profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR061

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting System Information.
Detailed Description: Collecting system information and copying it into the backup file. The operation collects system information that includes System Model and Service Tag.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR062

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting Lifecycle Controller Configuration database.
Detailed Description: Collecting the Lifecycle Controller configuration database and copying it into the server profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR063

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting Lifecycle Controller Firmware images.
Detailed Description: Collecting the Lifecycle Controller firmware images and copying them in the server profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR064

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting Integrated Remote Access Controller firmware.
Detailed Description: Collecting the Integrated Remote Access Controller firmware and copying it in the server profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR065

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting Integrated Remote Access Controller configuration.
Detailed Description: Collecting the Integrated Remote Access Controller configuration and copying it into the server profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR066

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: vFlash media not enabled.
Detailed Description: The system profile export destination is not enabled.
Recommended Response Action: Enable the vFlash media and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR067

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: vFlash media not initialized.
Detailed Description: The system profile export destination is not initialized.
Recommended Response Action: Initialize the vFlash media and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR068

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: vFlash media not supported.
Detailed Description: The system profile export destination is not supported.
Recommended Response Action: Insert, enable and initialize supported vFlash media and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR069

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Insufficient space on vFlash media.
Detailed Description: The system profile export did not complete successfully because there is insufficient space on the vFlash media.
Recommended Response Action: Delete partitions and free up 384 MB of space on the current vFlash media, or use new vFlash media.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR070

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: NFS Destination access denied.
Detailed Description: Access to the NFS export/import destination is not possible or has been denied.
Recommended Response Action: Verify that the input parameters are correct, connectivity exists to the destination end point, and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR071

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: CIFS Destination access denied.
Detailed Description: Access to the CIFS export/import destination is not possible or has been denied.
Recommended Response Action: Verify that the input parameters are correct, connectivity exists to the destination end point, and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR072

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Format of vFlash Backup partition unsuccessful.
Detailed Description: The vFlash backup partition format operation was not successful.
Recommended Response Action: Enable and initialize the vFlash media and retry the export. If the issue persists, try a new vFlash media or use the network share option(s).
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR073

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Delete of vFlash Backup partition unsuccessful.
Detailed Description: The operation to delete the vFlash backup partition did not complete successfully.
Recommended Response Action: Enable and initialize the vFlash media and retry the export. If the error continues, try a new vFlash media or use the network share option(s).
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR074

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect Firmware Inventory information.
Detailed Description: The collection and export of firmware inventory data did not complete successfully.
Recommended Response Action: Apply the Dell Update Package for Unified Server Configurator (USC) or Lifecycle Controller (LC). If collect system inventory on reboot (CSIOR) is not enabled, enter and exit LC/USC to update the database, reboot the system and try the operation again. If the error continues, use the field service repair software to repair the Lifecycle Controller. Download all Dell Update Packages for USC, Diagnostics Driver Packs, and device firmware for all host system devices, install all packages and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR075

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect System information.
Detailed Description: The collection and export of system information failed.
Recommended Response Action: Restart the remote access controller, and retry the operation. If the error continues, use the remote access controller firmware to try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR076

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect the Configuration database.
Detailed Description: The collection and export of Lifecycle Controller Configuration Database failed.
Recommended Response Action: Enter Lifecycle Controller (LC) / Unified Server Configurator (USC), and select Exit and Reboot to reset and update the database. If the error continues repair the Lifecycle Controller, apply the Dell Update Packages for USC, diagnostics, device firmware and driver pack and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR077

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect the Firmware images.
Detailed Description: The collection and export of host system firmware images was not successful.
Recommended Response Action: Apply Dell Update Packages for all devices and software, and try the operation again. If the error continues, repair the Lifecycle Controller and apply the packages again, and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR078

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect the Integrated Remote Access Controller firmware.
Detailed Description: The collection and export of Integrated Remote Access Controller (iDRAC)firmware was not successful.
Recommended Response Action: Apply the integrated remote access controller firmware, manually set the configuration attributes, and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR079

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect the Integrated Remote Access Controller configuration.
Detailed Description: The collection and export of Integrated Remote Access Controller configuration was not successful.
Recommended Response Action: Apply the integrated remote access controller firmware, manually set the configuration attributes, and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR080

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Lifecycle Controller Configuration database.
Detailed Description: Importing the Lifecycle Controller configuration database from the system profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR081

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Lifecycle Controller Firmware images.
Detailed Description: Importing the Lifecycle Controller firmware image data is from the system profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR082

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring Remote Access Controller configuration.
Detailed Description: Remote access controller firmware and configuration import in progress.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR083

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Host System Model does not match the Backup file System Model information.
Detailed Description: System profile backup file validation failed because the host system model information does not match the value stored in the file.
Recommended Response Action: Obtain a valid host system backup image and try the operation again. Reboot the remote access controller and try the operation again. If the error continues, download a new remote access controller firmware image and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR084

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Host System Service Tag does not match the Backup file Service Tag.
Detailed Description: System profile backup file validation failed because the host system service tag information does not match the value stored in the file.
Recommended Response Action: Obtain a valid host system backup image and try the operation again. Reboot the remote access controller and try the operation again. If the error continues, download a new remote access controller firmware image and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR085

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect System Information for Import Backup file validation.
Detailed Description: The validation of the system profile backup file has failed. The retrieval of system information to validate the backup file has failed.
Recommended Response Action: Restart the remote access controller, and retry the operation. If the error continues, use the remote access controller firmware to try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR086

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to Restore The Lifecycle Controller Configuration database.
Detailed Description: The system profile import of Lifecycle Controller configuration data has failed.
Recommended Response Action: If collect system inventory on reboot (CSIOR) is not enabled, enter and exit System Services in Lifecycle Controller (LC)/ Unified Server Configurator (USC) to update the database, reboot the system and try the operation again. If the error continues, use the field service repair software to repair the Lifecycle Controller. Download all Dell Update Packages for USC, Diagnostics Driver Packs, and device firmware for all host system devices, install all packages and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR087

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to Restore the Lifecycle Controller Firmware images.
Detailed Description: The system profile import of Lifecycle Controller firmware images has failed.
Recommended Response Action: Apply the Dell Update Package for this system. If the error continues, use the field service repair software to repair the Lifecycle Controller. Download all Dell Update Packages for Lifecycle Controller/USC, Diagnostics Driver Packs, and device firmware for all host system devices, install all packages and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR088

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: No partitions available on vFlash media.
Detailed Description: The maximum number of partitions are already in use.
Recommended Response Action: Delete partitions and free up 384MB of space on the current vFlash media or obtain new vFlash media.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR089

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Lifecycle Controller needs to be updated.
Detailed Description: A problem has been detected with the installation of the Unified Server Configurator (USC) or Lifecycle Controller (LC). This needs to be corrected before a valid Backup file can be created.
Recommended Response Action: Obtain the Dell update package for Lifecycle Controller/Unified Server Configurator and apply it. Then perform a Backup operation to save this data, for later restore.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR090

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Profile Backup requested.
Detailed Description: A request to create a System Profile Backup file has been made by the user of the Unified Server Configurator interface.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR091

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: System Profile Backup completed.
Detailed Description: A System Profile Backup request made by the user of the Unified Server Configurator interface has completed.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR092

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Disconnect from NFS unsuccessful.
Detailed Description: The attempt to disconnect from the specified NFS location was not successful.
Recommended Response Action: If this happens on a backup request, restart the Integrated Remote Access Controller and try the operation again. If this is a restore request the Integrated Remote Access will be restarted during the execution of the request. Only restart the Integrated Remote Access Controller if it does not restart on its own.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR093

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Disconnect from CIFS unsuccessful.
Detailed Description: The attempt to disconnect from the specified CIFS location was not successful.
Recommended Response Action: If this happens on a backup request, restart the Integrated Remote Access Controller and try the operation again. If this is a restore request the Integrated Remote Access will be restarted during the execution of the request. Only restart the Integrated Remote Access Controller if it does not restart on its own.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR094

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Another Backup operation already in progress.
Detailed Description: The request to create a System Profile Backup file did not complete successfully because there is already a request in progress.
Recommended Response Action: If possible monitor the in progress job for completion and then retry the request. If that is not possible try clearing all jobs and try the request again. If the issue persists, restart the Integrated Remote Access Controller (iDRAC) and try the request again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR095

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Another Restore operation already in progress.
Detailed Description: The request to restore a System Profile from a Backup file did not complete successfully because there is already a request in progress.
Recommended Response Action: If possible monitor the in progress job for completion and then retry the request. If that is not possible try clearing all jobs and try the request again. If the issue persists, restart the Integrated Remote Access controller and try the request again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR096

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: BIOS incompatibility detected.
Detailed Description: The current BIOS firmware installed on the system does not have Backup and Restore feature support.
Recommended Response Action: Obtain the System BIOS firmware with Backup and Restore support, update the system and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR097

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Lifecycle Controller Unified Server Configurator incompatibility detected.
Detailed Description: The current Lifecycle Controller Unified Server Configurator software installed on the system does not have Backup and Restore feature support.
Recommended Response Action: Obtain the Lifecycle Controller Unified Server Configurator update package with Backup and Restore support, update the software and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR098

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Invalid System Service Tag.
Detailed Description: The Service Tag installed on the system is invalid. The Backup and Restore feature will not operate without a valid Service Tag.
Recommended Response Action: If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR099

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting License data.
Detailed Description: License data is being collected and copied into the backup Server Profile.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR100

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect License data.
Detailed Description: An error occurred accessing license data. Cannot collect license data to copy to Server Profile backup file.
Recommended Response Action: Refer to License Management documentation for re-installation of license(s) instructions and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR101

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring License data.
Detailed Description: Importing license data from the backup Server Profile.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR102

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to restore license data.
Detailed Description: Unable to import license data from the backup Server Profile.
Recommended Response Action: Refer to iDRAC User Guide documentation license installation instructions and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR103

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Collecting system branding data.
Detailed Description: System branding data is being collected and copied to the backup Server Profile.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR104

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to collect system branding data.
Detailed Description: Unable to collect system branding data to copy to backup Server Profile.
Recommended Response Action: Retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR105

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Restoring system branding data.
Detailed Description: Importing system branding data from the Server Profile backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR106

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to restore system branding data.
Detailed Description: Unable to import system branding data from the backup Server Profile.
Recommended Response Action: Retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR107

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: vFlash media reader license not present.
Detailed Description: The vFlash media reader requires a license to function.
Recommended Response Action: Obtain the license for vFlash media from your service provider. Install the license and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR108

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: License to Export and Import Server Profile not present.
Detailed Description: The license required for Server Profile Import and Export operations to function is not present.
Recommended Response Action: Obtain the license for Server Profile Export and Import, install the license and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR109

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: OEMDRV partition is in use.
Detailed Description: The OEMDRV partition is mounted for performing operating system deployment use. This situation prevents the Export and Import Server Profile operation from continuing.
Recommended Response Action: Dismount the OEMDRV partition by selecting F10 during boot and retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR110

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: All existing jobs cancelled because of Import Server Profile request processing.
Detailed Description: All the existing jobs are canceled during the Import Server Profile operation or if the Import operation fails.
Recommended Response Action: Resubmit any jobs that were cancelled by the Import operation after the Import Server Profile operation completes.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR111

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Server Profile operation timed out.
Detailed Description: The Import or Export job did not complete successfully. The Import or Export operation timed-out while validating or transferring Server Profile data. Possible causes are loss of network connectivity, vFlash SD card access issues, or problems encountered with system power off and on.
Recommended Response Action: If the managed system does not turn off during Import, turn off the system and retry the operation. If the managed system turned off, restart the Remote Access Controller and retry the operation. If the export was to a network share verify the connection and try the operation again. If the export destination was the vFlash media, insert a new SD card and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR112

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: The system identifier in the Server Profile file does not match the target system.
Detailed Description: Server Profile backup file validation failed because the target system identifier information does not match the value stored in the file. The Server Profile file may be from another system or the iDRAC may need to be restarted to acquire the system identifier information accurately.
Recommended Response Action: Obtain a valid Server Profile file for the target system and try the operation again. If the problem reoccurs, restart the iDRAC and try the operation again.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR113

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to create an Automatic Backup job.
Detailed Description: The Automatic Backup job that was scheduled earlier was not successfully created. This could be because an invalid parameter was entered to create the job.
Recommended Response Action: To restart the Automatic Backup job, do the following and retry the operation:1a) On the Redfish or RACADM interface: Clear the existing scheduled backup settings.1b) Or, on the iDRAC User Interface: Click Server Profile > Automatic Backup tab.2) Clear the existing settings and re-enter the appropriate configuration data.3) Select Schedule Backup to initiate the Automatic Backup jobs.
Category: Configuration (BAR = Backup/Restore)
Severity: Warning
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR114

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

An Automatic Backup job arg1 is created.

Arguments

arg1 = job ID

Detailed Description

The Automatic Backup job identified in the message is created per the Server Profile automatic export schedule previously configured.

Recommended Response Action

No response action is required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR115

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: The number of Automatic Server Profile backup files has reached the specified limit. Restarting the numbering from 1.
Detailed Description: The number of Automatic Server Profile backup files has reached the specified limit. Restarting the numbering from 1 which will overwrite the oldest backup file.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR116

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to create a recurring export Server Profile job because an existing scheduled Backup Image job is scheduled within the next 24 hours.
Detailed Description: Unable to create a recurring export Server Profile job because an existing scheduled Backup Image job is scheduled within the next 24 hours.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR117

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: The iDRAC firmware cannot be restored due to hardware compatibility restraints.
Detailed Description: The firmware version for the iDRAC contained in the hardware Server Profile image is not compatible with this system hardware. Continue to use the installed firmware version or update to later versions if necessary.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR118

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to continue with Restore operation because the backup image file name is invalid.
Detailed Description: The Restore operation cannot be completed because the backup image file name is invalid.
Recommended Response Action: Make sure the backup image file name has valid characters and is not too long, and then retry the operation. For information about valid image file names, see the iDRACs Users Guide available on the support site.
Category: Configuration (BAR = Backup/Restore)
Severity: Warning
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR119

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: The Backup operation is currently validating the ability to access the HTTP destination.
Detailed Description: The Backup operation is currently validating the ability to access the HTTP destination.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR120

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: The Backup operation is currently validating the ability to access the HTTPs destination.
Detailed Description: The Backup operation is currently validating the ability to access the HTTPs destination.
Recommended Response Action: No response action is required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR121

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to continue with Backup operation because access to the HTTP destination is denied.
Detailed Description: The Backup operation cannot be completed because access to the HTTP destination is denied.
Recommended Response Action: Make sure that the input parameters are correct, network connection exists to the destination, and then retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR122

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to continue with Backup operation because access to the HTTPs destination is denied.
Detailed Description: The Backup operation cannot be completed because access to the HTTPs destination is denied.
Recommended Response Action: Make sure that the input parameters are correct, network connection exists to the destination, and then retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR123

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to copy the Server Profile file to the HTTP/HTTPs share either because of incorrect filepath, or network connection issues.
Detailed Description: The Server Profile file cannot be copied to the HTTP/HTTPs share either because of incorrect filepath, or network connection issues.
Recommended Response Action: Make sure that the input parameters are correct, network connection exists to the destination, and then retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR124

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to continue with Restore operation because access to the HTTP destination is denied.
Detailed Description: The Restore operation cannot be completed because access to the HTTP destination is denied.
Recommended Response Action: Make sure that the input parameters are correct, network connection to the destination is started, and then retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR125

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to continue with Restore operation because access to the HTTPs destination is denied.
Detailed Description: The Restore operation cannot be completed because access to the HTTPs destination is denied.
Recommended Response Action: Make sure that the input parameters are correct, network connection to the destination is started, and then retry the operation.
Category: Configuration (BAR = Backup/Restore)
Severity: Critical
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR126

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Unable to perform any vFlash operations on this PowerEdge server model because it is not supported.
Detailed Description: The vFlash operations cannot be performed on this PowerEdge server model because it is not supported. For a list of supported server versions, see the Installation and Service Manual available on the support site.
Recommended Response Action: Please retry your Server Profile Backup or Restore operation using one of the available network share options.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR127

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: The Import/Export Server Profile features have been retired and no are longer available in iDRAC9 4.40.00.00 and later versions.
Detailed Description: Export and Import System Profile are not available in this iDRAC release. Please refer to the iDRAC Users Guide for more information.
Recommended Response Action: Please refer to the iDRAC Users Guide for more information.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR128

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Successfully restored the arg1 system contents.

Arguments

arg1 = components

Detailed Description

Motherboard replacement was performed on the system. The previous system configuration contents were successfully restored.

Recommended Response Action

No response action required.

Category

Configuration (BAR = Backup/Restore)

Severity

Informational

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable

BAR129

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message: Successfully initiated the system configuration restore. Kindly wait for the server configuration profile import job to complete and check for the results.
Detailed Description: Motherboard replacement was performed on the system. Review the server configuration profile import job details for attributes related information.
Recommended Response Action: No response action required.
Category: Configuration (BAR = Backup/Restore)
Severity: Informational
Redfish Event Type: Not Applicable
Applicable Event or Alert Types: iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types: CMC—Not Applicable

BAR130

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.

Message

Failed to restore the arg1 on the system during motherboard replacement.

Arguments

arg1 = components

Detailed Description

Motherboard replacement was performed on the system. Some of the components failed to restore.

Recommended Response Action

If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.

Category

Configuration (BAR = Backup/Restore)

Severity

Warning

Redfish Event Type

Not Applicable

Applicable Event or Alert Types

iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*

Applicable Event or Alert Types

CMC—Not Applicable