PowerEdge Servers Error and Event Messages Reference Guide
CDEV—Devices Event Messages
CDEV0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve inventory information for the device.
- Detailed Description
- Inventory information is not available for the requested device.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV0024
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update Services Configuration arg1 for arg2 because of arg3.
- Arguments
- arg1 = version
- arg2 = type
- arg3 = reason
- Detailed Description
- Unable to update Services Configurations due to reason mentioned in message.
- Recommended Response Action
- Retry operation after sometime. If issue persists, contact your service provider.
- Category
- Audit (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV0100
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Proxy settings modified.
- Detailed Description
- Proxy settings modified.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV0102
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the requested operation because an invalid JSON file is entered.
- Detailed Description
- The requested operation cannot be completed because an invalid JSON file is entered.
- Recommended Response Action
- Enter a valid JSON file name and retry the operation. For more information about supported file types, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV0103
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request to remove the chassis arg1 from the Multi-chassis Management group arg2.
- Arguments
- arg1 = Chassis Service Tag
- arg2 = groupName
- Detailed Description
- The request to remove the chassis from the Multi-chassis Management group identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your service provider. For more information see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV0104
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- LCD Override PIN modified.
- Detailed Description
- LCD Override PIN is modified successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1000
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A request to send an email was successfully completed. The request came from arg1.
- Arguments
- arg1 = name
- Detailed Description
- An email send request was successfully completed.
- Recommended Response Action
- N/A.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A request to send an email failed. The origin of the request came from arg1.
- Arguments
- arg1 = name
- Detailed Description
- An email send request failed.
- Recommended Response Action
- Verify that the SMTP configuration is valid in your appliance alert settings and make sure that the remote SMTP destination is available.
- Category
- Audit (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The appliance couldnt send credential emails for arg1 out of arg2 users. The request was initiated by arg3.
- Arguments
- arg1 = count_of_users_email_failed
- arg2 = total_count_of_users
- arg3 = name
- Detailed Description
- The appliance was unable to send credential emails to some of the selected users.
- Recommended Response Action
- Retry the Email Login Details operation.
- Category
- Audit (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1040
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power usage details are not applicable for this device.
- Detailed Description
- Power usage information cannot be displayed because it is not applicable to this device.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1108
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the Multi Chassis Management domain group.
- Detailed Description
- The Multi Chassis Management domain group could not be created.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1109
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the Multi Chassis Management domain group because no chassis was found.
- Detailed Description
- The Multi Chassis Management domain group cannot be createdbecause no chassis was found.
- Recommended Response Action
- Retry the operation. If the issue persists contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1111
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve arg1 information for Multi Chassis Management.
- Arguments
- arg1 = data
- Detailed Description
- The information identified in the message cannot be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1112
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add members to the Multi Chassis Management group because no group is available.
- Detailed Description
- New members cannot be added to the Multi Chassis Management group because no group is available.
- Recommended Response Action
- Create a Multi Chassis Management group and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1113
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the member chassis to the Multi-chassis Management group.
- Detailed Description
- The member chassis could not be added to the Multi-chassis Management group.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1114
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the member chassis to the Multi-chassis Management group because only the lead chassis can approve requests for joining.
- Detailed Description
- The member chassis cannot be added to the Multi-chassis Management group because only the lead chassis can approve requests for joining.
- Recommended Response Action
- Retry the operation by using the lead chassis of the Multi-chassis Management group.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1115
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to approve the join request from the member chassis.
- Detailed Description
- The join request from the member chassis could not be approved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1116
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to broadcast the Multi Chassis Management group creation over mDNS.
- Detailed Description
- The Multi Chassis Management group creation could not be broadcast over mDNS.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your network administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1117
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to join the Multi-chassis Management group.
- Detailed Description
- Unable to join the Multi-chassis Management group.
- Recommended Response Action
- Make sure the Multi-chassis Management group is available and retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1118
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to join the Multi-chassis Management group arg1 because the chassis is already a member.
- Arguments
- arg1 = group UUID
- Detailed Description
- Unable to join the Multi-chassis Management group identified in the message because the chassis is already a member.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1119
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to join the Multi-chassis Management group because discovered groups are unavailable.
- Detailed Description
- Unable to join the Multi-chassis Management group because discovered groups are unavailable.
- Recommended Response Action
- Make sure the requested group is available and retry the operation. If the issue persists, contact your network administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1120
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to join the Multi-chassis Management group because the entered lead group arg1 is unavailable.
- Arguments
- arg1 = lead group
- Detailed Description
- The Multi-chassis Management group cannot be joined because the entered lead chassis IP is unavailable.
- Recommended Response Action
- Make sure the lead group identified in the message is available and retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1121
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the status of requests opened for joining the Multi-chassis Management group.
- Detailed Description
- The status of requests opened to join the Multi-chassis Management group cannot be retrieved.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1122
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The chassis is unable to complete the network operation arg1 because of internal issues. Fabric Manager message: arg2. Internal message ID: arg3.
- Arguments
- arg1 = operation Name
- arg2 = message
- arg3 = error Event Message Code
- Detailed Description
- The chassis is unable to complete the network operation identified in the message.
- Recommended Response Action
- Wait for few minutes and retry the operation. If the issue persists, contact your service provider.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1123
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform operation, because the fabric manager was not reachable.
- Detailed Description
- The given operation failed, because the fabric manager was not reachable.
- Recommended Response Action
- Make sure of the following and retry the operation: 1) There is at least one advanced I/O Module in power-on mode. For example, MX9116n Ethernet Switch and MX5108n Ethernet Switch. However, if an advanced I/O Module is available in the power-on mode, make sure that the network profile is not set when the fabric manager is in the switch-over mode. 2) If the issue persists, wait for few minutes and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1124
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The chassis is unable to complete the network operation arg1 because invalid input/configuration is provided.
- Arguments
- arg1 = arg1
- Detailed Description
- The chassis is unable to complete the network operation identified in the message.
- Recommended Response Action
- Verify the error identified in the message, correct it and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1125
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the network arg1 because invalid network name is entered. Fabric Manager message: arg2. Internal message ID: arg3.
- Arguments
- arg1 = network Name
- arg2 = message
- arg3 = error Event Message Code
- Detailed Description
- The chassis is unable to delete the network identified in the message because invalid network name is entered.
- Recommended Response Action
- Enter valid network name and retry the operation. If the issue persists, contact your service provider.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1126
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the attribute arg1 entered for the property arg2 is either invalid or of a different type.
- Arguments
- arg1 = attribute Name
- arg2 = property Name
- Detailed Description
- The operation cannot be completed because the attribute entered for the property is either invalid or of a different type as identified in the message.
- Recommended Response Action
- Enter a valid and correct attribute that is compatible with the identified property, and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1127
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the attribute arg1 entered for the property arg2 is not supported.
- Arguments
- arg1 = attribute Name
- arg2 = property Name
- Detailed Description
- The operation cannot be completed because the attribute entered for the property is not supported as identified in the message.
- Recommended Response Action
- Enter a valid and correct attribute, and then retry the operation. For example, if the character length of a property is more than the max permitted, reenter the property as recommended. For more information about recommended attributes for properties, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1128
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the task arg1 because an invalid parameter arg2 is entered.
- Arguments
- arg1 = task Name
- arg2 = parameter Name
- Detailed Description
- The task identified in the message cannot be completed because an invalid parameter is entered.
- Recommended Response Action
- Enter a valid and correct parameter, and then retry the operation. For more information about valid parameters, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1129
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because of an internal service error. However, the service is still running.
- Detailed Description
- The operation cannot be completed because of an internal service error. However, the service is still running.
- Recommended Response Action
- Retry the operation. If the issue persists, reset the service.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1130
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A general error has occurred. See ExtendedInfo for more information.
- Detailed Description
- The operation cannot be completed because of an internal error.
- Recommended Response Action
- See ExtendedInfo for more information.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1131
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the create operation because the property arg1 is not entered.
- Arguments
- arg1 = property Name
- Detailed Description
- The operation cannot be completed because the property identified in the message is not entered.
- Recommended Response Action
- Enter a valid property name and retry the operation. For more information, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1132
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the parameter arg1 entered is not supported on the target device for completing the task arg2.
- Arguments
- arg1 = parameter Name
- arg2 = task Name
- Detailed Description
- The operation cannot be completed because the parameter entered is not supported on the target device for completing the task as identified in the message.
- Recommended Response Action
- Enter a valid parameter and retry the operation. For more information, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1133
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform operation on provided network profile, because the fabric manager was not reachable.
- Detailed Description
- The operation cannot be performed on the network profile identified in the message because the fabric manager was not reachable.
- Recommended Response Action
- Make sure of the following and retry the operation: 1) There is at least one advanced I/O Module in power-on mode. For example, MX9116n Ethernet Switch and MX5108n Ethernet Switch. However, if an advanced I/O Module is available in the power-on mode, make sure that the network profile is not set when the fabric manager is in the switch-over mode. 2) If the issue persists, wait for few minutes and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1134
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update the uplink because there is no valid network profile associated to the Native VLAN entered: arg1.
- Arguments
- arg1 = arg1
- Detailed Description
- The uplink cannot be created or updated because there is no valid network profile associated to the native VLAN entered.
- Recommended Response Action
- Please use one of the available network profiles in the system. If a network profile with the VLAN entered does not exist, please create a new one.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1135
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update the FCoE uplink, because the firmware version of the I/O Module running the Fabric Manager does not support Native VLAN configuration for FCoE uplinks.
- Detailed Description
- The FCoE uplink cannot be created or updated, because the firmware version of the I/O Module running the Fabric Manager does not support Native VLAN configuration for FCoE uplinks.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1136
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform operation. The request(s) to fabric manager timed out.
- Detailed Description
- Unable to perform operation. The request(s) to fabric manager timed out.
- Recommended Response Action
- Fabric Manager is busy processing other requests, please wait for few minutes and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1137
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A new right control panel is detected in the chassis.
- Detailed Description
- A new right control panel is detected in the chassis.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1138
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The automatic restoration of chassis settings is completed on the right control panel.
- Detailed Description
- The automatic restoration of chassis settings is completed on the right control panel.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1139
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The automatic restoration of chassis settings, job arg1, is either unsuccessful or completed with warnings on the right control panel.
- Arguments
- arg1 = jobID
- Detailed Description
- The automatic restoration of chassis settings is either unsuccessful orcompleted with warnings on the right control panel.
- Recommended Response Action
- View the job data and recommended resolution. To view job data onthe Graphical User Interface (GUI), click Monitor-> Jobs. To view job data byrunning REST command, enter the following at the Command Line Interface (CLI): Jobs(<jobId>).
- Category
- Audit (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV1140
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A tampered right control panel is detected in the chassis.
- Detailed Description
- A tampered right control panel is detected in the chassis.
- Recommended Response Action
- Replace with a pristine right control panel in the chassis. For steps about replacing, see the hardware documentation of the respective chassis available on the support site.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The leader chassis of the Multi-Chassis Management group does not have a backup chassis.
- Detailed Description
- The leader chassis of the Multi-Chassis Management (MCM) group does not have a backup chassis.
- Recommended Response Action
- Assign a member of the group as the backup chassis. For information about assigning a backup chassis, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Multi-Chassis Management group lead redundancy is lost because of either network issues or firmware version mismatch.
- Detailed Description
- The Redundancy feature of the Multi-Chassis Management (MCM) group lead chassis is unavailable anymore either because of network issues or difference in the firmware version of lead and backup chassis.
- Recommended Response Action
- Do the following: 1) Check the network cables that connect the management ports between the chassis. 2) Make sure that the firmware version of the lead and backup chassis are same. If the issue persists, unassign the backup chassis and reassign. For information about assigning a backup chassis, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Redundancy feature of the Multi-Chassis Management (MCM) group lead chassis is degraded.
- Detailed Description
- The Redundancy feature of the Multi-Chassis Management (MCM) group lead chassis is degraded.
- Recommended Response Action
- No response action is required. The configuration data of the Multi-Chassis Management (MCM) will be automatically recovered and synchronized. If condition persists, unassign the backup and repeat the assign backup operation.
- Category
- System Health (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to replicate the Multi-Chassis Management data to the backup chassis arg1 because the service is interrupted.
- Arguments
- arg1 = service tag
- Detailed Description
- The Multi-Chassis Management data cannot be replicated to the backup chassis identified in the message because the service is interrupted.
- Recommended Response Action
- Wait for the Management Module to automatically update the replication data. If the issue persists, unassign the backup chassis and reassign the same chassis as a backup.
- Category
- System Health (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Multi-Chassis Management (MCM) lead chassis is unable to communicate with the backup chassis arg1 because of network issues.
- Arguments
- arg1 = service tag
- Detailed Description
- The Multi-Chassis Management (MCM) lead chassis cannot communicate with the backup chassis identified in the message because of network issues.
- Recommended Response Action
- Do the following: 1) Check the network cables that connect the management ports between the chassis. 2) If a cable issue is not found, but the lead chassis is still inaccessible by using its management IP, promote the backup chassis as the lead chassis. For information about assigning a lead chassis, see the OpenManage Enterprise-Modular User Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to replicate Multi-Chassis Management data from lead to backup chassis arg1 because of a firmware version mismatch between both the chassis.
- Arguments
- arg1 = service tag
- Detailed Description
- The Multi-Chassis Management data cannot be replicated from the lead to the backup chassis identified in the message because of a firmware mismatch between both the chassis.
- Recommended Response Action
- Make sure that the firmware version of both the lead and backup chassis is same and retry the operation. For information about updating the firmware version of an Multi-Chassis Management (MCM), see the OpenManage Enterprise-Modular User Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to replicate the Multi-Chassis Management data from lead to backup chassis arg1 because of internal issues.
- Arguments
- arg1 = service tag
- Detailed Description
- Data between the Multi-Chassis Management (MCM) lead and backup chassis cannot be synchronized because of internal issues.
- Recommended Response Action
- Unassign the backup chassis, reassign, and then retry the operation. If the issue persists, contact your service provider. For information about assigning a Multi-Chassis Management (MCM) backup chassis, see the OpenManage Enterprise-Modular User Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to replicate the Multi-Chassis Management data from the lead chassis arg1 because the service is interrupted.
- Arguments
- arg1 = service tag
- Detailed Description
- The Multi-Chassis Management data cannot be replicated from the lead chassis identified in the message because the service is interrupted.
- Recommended Response Action
- The management module will attempt to automatically bring data replication up to date. If condition persists, unassign the backup and repeat the assign backup operation. If lead chassis is not available, promote the backup chassis as lead.
- Category
- System Health (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Redundancy feature of the Multi-Chassis Management (MCM) group lead chassis is restored.
- Detailed Description
- The Redundancy feature of the Multi-Chassis Management (MCM) group lead chassis is restored.
- Recommended Response Action
- No response action required.
- Category
- System Health (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV4028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve inventory data because of an unknown issue.
- Detailed Description
- The inventory data cannot be retrieved because of an unknown issue.
- Recommended Response Action
- Check the log data and retry the operation. For information about checking log data, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV5003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the network profile, arg1, associated with the untagged VLAN that is entered is of FCoE type.
- Arguments
- arg1 = network Name
- Detailed Description
- The operation cannot be completed because the network profile associated with the untagged VLAN that is entered is of FCoE type.
- Recommended Response Action
- Do the following and retry the operation: 1) Enter the same value for both VLAN minimum and maximum 2) Select a VLAN type of anything other than FCoE.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV5006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the server profile : arg1, because arg2.
- Arguments
- arg1 = Server Profile Id
- arg2 = message
- Detailed Description
- The server profile cannot be updated because of the issue identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV5007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The server profile : arg1 is successfully updated.
- Arguments
- arg1 = Server Profile Id
- Detailed Description
- The server profile identified in the message is successfully updated.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV5008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the server profile, arg1, does not exist in the Fabric Manager.
- Arguments
- arg1 = Server Profile ID
- Detailed Description
- The operation cannot be completed because the server profile identified in the message does not exist in the Fabric Manager.
- Recommended Response Action
- Do the following and retry the operation: 1) Deploy a new server profile on the server. For information about deploying a server profile see the OpenManage Enterprise-Modular Users Guide available on the support site. 2) Enter a valid server profile ID.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV5009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the network properties because the VLAN minimum arg1 must be equal to VLAN maximum arg2.
- Arguments
- arg1 = min Vlan
- arg2 = max Vlan
- Detailed Description
- The network properties cannot be updated because the VLAN minimum must be equal to VLAN maximum as identified in the message.
- Recommended Response Action
- Enter the same value for both VLAN minimum and maximum and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV5010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Untagged VLAN cannot be configured because the value provided in the request does not exist.
- Detailed Description
- The Untagged VLAN cannot be configuredbecause the valueprovided in the request does not exist.
- Recommended Response Action
- Enter the valid Untagged VLAN and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to establish a network connection with the target device.
- Detailed Description
- The operation cannot be completed because a communication error occurred.
- Recommended Response Action
- Make sure the target device is available and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect to the URL arg1.
- Arguments
- arg1 = url
- Detailed Description
- The operation cannot be completed with the specified URL.
- Recommended Response Action
- Make sure the entered URL is correct and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to open the URL arg1 because it is malformed.
- Arguments
- arg1 = url
- Detailed Description
- The operation cannot be completed with the specified URL.
- Recommended Response Action
- Enter a valid URL and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to open the location arg1 because the path or URL is invalid.
- Arguments
- arg1 = url
- Detailed Description
- The operation cannot be completed because the specified path or URL is invalid.
- Recommended Response Action
- Enter a valid path or URL and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the file on the remote share either because of network connection issues or credentials are not saved to provide access rights.
- Detailed Description
- The file on the remote share cannot be accessed either because of network connection issues or credentials are not saved to provide access rights.
- Recommended Response Action
- Make sure that the share path and credentials are correct and that the share is accessible and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to write to the local file or temp file either because the file path is invalid or a file with the same name already exists in the folder.
- Detailed Description
- Cannot write to the local file or temp file either because the file path is invalid or a file with the same name already exists in the folder.
- Recommended Response Action
- Make sure that the correct file path is entered and that a file with the same name does not already exist in the folder.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to read the remote file arg1 either because the file is not available on the remote share or the share is not accessible.
- Arguments
- arg1 = fileName
- Detailed Description
- Cannot read the remote file either because the file is not available on the remote share or the share is not accessible.
- Recommended Response Action
- Make sure that the file exists on the remote share and that the share is accessible.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to read the remote file arg1 because the remote file is not available.
- Arguments
- arg1 = file name
- Detailed Description
- Cannot read the remote file because the remote file is not available.
- Recommended Response Action
- Make sure the file exists on the remote location or URL and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to read the remote file because the file path or URL arg1 is invalid.
- Arguments
- arg1 = path
- Detailed Description
- Cannot read the remote file because the file path or URL is invalid.
- Recommended Response Action
- Make sure that the file path or URL is valid and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the URL arg1 because of restricted permissions.
- Arguments
- arg1 = URL
- Detailed Description
- The URL cannot be access because of restricted permissions.
- Recommended Response Action
- Make sure that necessary user access rights are provided and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to execute the command because the target device IP is not reachable: arg1.
- Arguments
- arg1 = message
- Detailed Description
- The operation cannot be completed because the target device IP is not reachable.
- Recommended Response Action
- Make sure that the target device is available and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to start network connection because a communication error occurred.
- Detailed Description
- The network connection cannot be started because a communication error occurred.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your network administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6030
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process action because the operation is not supported by the target device.
- Detailed Description
- The operation cannot be completed because it is not supported by the target device.
- Recommended Response Action
- Make sure the requested action is supported and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6032
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the action because there is no associated protocol for the action arg1 and device type arg2.
- Arguments
- arg1 = action name
- arg2 = device type
- Detailed Description
- The operation cannot be completed because there is no associated protocol as identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6040
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upload the Field Service Debug (FSD) certificate because the device ID entered does not exist.
- Detailed Description
- The Field Service Debug (FSD) certificate cannot be uploaded because the device ID entered does not exist.
- Recommended Response Action
- Enter a valid device ID and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6041
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- FSD dat file downloaded.
- Detailed Description
- User initiated FSD dat file download.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6042
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- FSD dat file uploaded.
- Detailed Description
- User uploaded FSD dat file.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6043
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- SSH key file uploaded.
- Detailed Description
- User uploaded SSH key file.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6044
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to discover the available chassis domains.
- Detailed Description
- The available chassis domains cannot be discovered.
- Recommended Response Action
- Make sure that the network is available and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6046
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The creation request for fabric arg1 was successfully submitted.
- Arguments
- arg1 = fabric
- Detailed Description
- The create request for fabric identified in the message was successful.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6047
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The fabric arg1 is successfully updated.
- Arguments
- arg1 = fabric
- Detailed Description
- The fabric identified in the message is successfully updated.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6048
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The deletion request for fabric arg1 was successfully submitted.
- Arguments
- arg1 = arg1
- Detailed Description
- The deletion request for fabric identified in the message was successfully submitted.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6049
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the fabric arg1.
- Arguments
- arg1 = fabric
- Detailed Description
- The fabric identified in the message could not be created.
- Recommended Response Action
- Enter valid fabric parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6050
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the fabric arg1.
- Arguments
- arg1 = fabric
- Detailed Description
- The fabric identified in the message cannot be updated because invalid fabric parameters are entered.
- Recommended Response Action
- Enter valid fabric parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6051
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The deletion request for fabric arg1.
- Arguments
- arg1 = fabric
- Detailed Description
- The fabric identified in the message could not be deleted.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6052
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The uplink arg1 for fabric arg2 is successfully created.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink is successfully created for the fabric identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6053
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The uplink arg1 for fabric arg2 is successfully updated.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink is successfully updated for the fabric identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6054
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The uplink arg1 for fabric arg2 is successfully deleted.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink is successfully deleted for the fabric identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6055
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the uplink arg1 for fabric arg2.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink cannot not be created for the fabric identified in the message.
- Recommended Response Action
- Enter valid uplink parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6056
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the uplink arg1 for fabric arg2.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink cannot be updated for the fabric identified in the message.
- Recommended Response Action
- Enter valid uplink parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6057
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the uplink arg1 for fabric arg2.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink cannot be deleted for the fabric identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6058
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the specified fabric resource does not exist.
- Detailed Description
- The operation cannot be completed because the specified fabric resource does not exist.
- Recommended Response Action
- Make sure that the fabric data entered is valid and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6060
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation arg1 because the device did not respond.
- Arguments
- arg1 = operation
- Detailed Description
- The operation identified in the message cannot be completed because the device did not return respond.
- Recommended Response Action
- Make sure that the device is available and supports the operation, and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6065
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the fabric(s) arg1.
- Arguments
- arg1 = fabrics
- Detailed Description
- The fabric(s) identified in the message cannot be deleted.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6066
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the uplink(s) arg1 for fabric arg2.
- Arguments
- arg1 = uplink
- arg2 = fabric
- Detailed Description
- The uplink(s) could not be deleted for the fabric identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6067
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the fabric because the attribute arg1 cannot be edited.
- Arguments
- arg1 = attributeName
- Detailed Description
- The fabric cannot be updated because the attribute identified in the message cannot be edited.
- Recommended Response Action
- Omit the attribute from the payload and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6071
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update network controller information.
- Detailed Description
- The network controller information cannot be created or updated.
- Recommended Response Action
- Enter valid network controller information and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6072
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the member information because member ID arg1 entered does not exist.
- Arguments
- arg1 = member ID
- Detailed Description
- The member information cannot be retrieved because member ID entered identified in the message does not exist.
- Recommended Response Action
- Enter a valid member ID and retry the operation. For information about valid member IDs, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6074
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to set the default password because autodiscovery has not yet completed.
- Detailed Description
- The password cannot be set because autodiscovery has not been completed yet.
- Recommended Response Action
- Wait until autodiscovery has completed and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6075
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve the device information because the entered device ID arg1 does not exist.
- Arguments
- arg1 = device ID
- Detailed Description
- The device information cannot be retrieved because the entered device ID does not exist.
- Recommended Response Action
- Enter a valid device ID and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6076
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve node information because no applicable nodes were found.
- Detailed Description
- Node information cannot be retrieved because no applicable nodes were found.
- Recommended Response Action
- Make sure that any nodes are in Full Switch mode and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6077
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve uplink port information because no applicable ports were found.
- Detailed Description
- Uplink port information cannot be retrieved because no applicable ports were found.
- Recommended Response Action
- Make sure ports are available and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6078
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve uplink port information because no ports were found.
- Detailed Description
- Uplink port information cannot be retrieved because no ports were found.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6079
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve device settings because device settings were not found for the device arg1.
- Arguments
- arg1 = device ID
- Detailed Description
- Device settings cannot be retrieved because device settings were not found for the device identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6080
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the management task on this device because the device is not onboarded.
- Detailed Description
- The management operation cannot be performed on this device because the device is not onboarded.
- Recommended Response Action
- Onboard the device from the All-Devices page and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6081
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The chassis arg1 could not be added because it is already a member of the group arg2.
- Arguments
- arg1 = service tag
- arg2 = group name
- Detailed Description
- The chassis could not be added because it is already a member of the group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6083
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or modify the Multi-chassis Management group.
- Detailed Description
- The Multi-chassis Management group cannot be created or modified.
- Recommended Response Action
- Make sure the entered group configuration is valid and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6084
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to join Multi-chassis Management group arg2 at arg3.
- Arguments
- arg1 = job
- arg2 = arg2
- arg3 = arg3
- Detailed Description
- The job is successfully created to join the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6085
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to join the Multi-chassis Management group arg1 at arg2.
- Arguments
- arg1 = group name
- arg2 = IP address
- Detailed Description
- The device cannot be joined to the Multi-chassis Management group identified in the message.
- Recommended Response Action
- Make sure that the entered IP address is a group lead and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6086
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to leave the Multi-chassis Management group arg2 at arg3.
- Arguments
- arg1 = job ID
- arg2 = group Name
- arg3 = ip Address
- Detailed Description
- The job is successfully created to leave the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6087
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to leave the Multi-chassis Management group arg1 at arg2.
- Arguments
- arg1 = arg1
- arg2 = arg2
- Detailed Description
- The device was unable to leave the Multi-chassis Management group.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6088
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to add the chassis arg2 to the Multi-chassis Management group arg3.
- Arguments
- arg1 = job
- arg2 = chassis
- arg3 = group
- Detailed Description
- The job is successfully created to add the chassis to the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6089
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the chassis arg1 to the Multi-chassis Management group arg2.
- Arguments
- arg1 = chassis
- arg2 = group
- Detailed Description
- The chassis cannot be added to the Multi-chassis Management group identified in the message.
- Recommended Response Action
- Make sure that the group is available and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6090
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to remove the chassis arg2 from the Multi-chassis Management group arg3.
- Arguments
- arg1 = job
- arg2 = chassis name
- arg3 = group name
- Detailed Description
- The job is successfully created to remove the chassis from the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6092
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to create or modify Multi-chassis Management group arg2.
- Arguments
- arg1 = job
- arg2 = group
- Detailed Description
- The Multi-chassis Management group identified in the message is successfully created or modified.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6093
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The chassis arg1 is approved to join the Multi-chassis Management group arg2.
- Arguments
- arg1 = chassis
- arg2 = group
- Detailed Description
- The chassis is approved to join the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6094
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The chassis arg1 is denied from joining the Multi-chassis Management group arg2.
- Arguments
- arg1 = chassis
- arg2 = group
- Detailed Description
- The chassis is denied from joining the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6095
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The request to join the Multi-chassis Management group arg1 is approved.
- Arguments
- arg1 = group
- Detailed Description
- The request is approved to join the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6096
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the confirmation to join the Multi-chassis Management group.
- Detailed Description
- The confirmation to join the Multi-chassis Management group cannot be processed.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6097
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to delete the member chassis arg2 from the Multi-chassis Management group arg3.
- Arguments
- arg1 = job
- arg2 = chassis
- arg3 = group
- Detailed Description
- The job is successfully created to delete the member chassis from the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6098
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the job to delete the member chassis arg1 from the Multi-chassis Management group arg2.
- Arguments
- arg1 = chassis
- arg2 = group
- Detailed Description
- The job to delete the member chassis from the Multi-chassis Management group identified in the message cannot be created.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6099
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Processed a request to leave the Multi-chassis Management group arg1.
- Arguments
- arg1 = group name
- Detailed Description
- Processed a request to leave the Multi-chassis Management group identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6101
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job arg1 is successfully created to delete the Multi-chassis Management group arg2.
- Arguments
- arg1 = job
- arg2 = group
- Detailed Description
- The job to delete the Multi-chassis Management group identified in the message is successfully created.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6102
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the job to delete the Multi-chassis Management group arg1.
- Arguments
- arg1 = group
- Detailed Description
- The job to delete the Multi-chassis Management group identified in the message cannot be created.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6104
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create a job to add the chassis arg1 to the Multi Chassis Management group arg2.
- Arguments
- arg1 = chassis name
- arg2 = group name
- Detailed Description
- Member chassis cannot be added to Multi Chassis Management group.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6105
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The member chassis arg1 was successfully added to the Multi Chassis Management group arg2.
- Arguments
- arg1 = chassis name
- arg2 = group name
- Detailed Description
- The member chassis was successfully added to the Multi Chassis Management group.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6106
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the member chassis arg1 to the Multi Chassis Management group arg2.
- Arguments
- arg1 = chassis name
- arg2 = group name
- Detailed Description
- The member chassis cannot be added to the Multi Chassis Management group.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6109
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 settings for the device with the identifier arg2 have been successfully updated.
- Arguments
- arg1 = setting type
- arg2 = device identifier
- Detailed Description
- The settings for the device identified in the message are successfully updated.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6110
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the arg1 settings for the device with the identifier arg2 arg3.
- Arguments
- arg1 = setting type
- arg2 = device identifier
- arg3 = device message
- Detailed Description
- The settings for the device identified in the message cannot be updated.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6111
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device arg1 is successfully deleted.
- Arguments
- arg1 = device name
- Detailed Description
- The device identified in the message is successfully deleted.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6112
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Storage assignment from the device arg1 is successful.
- Arguments
- arg1 = device ID
- Detailed Description
- Storage assignment from the device identified in the message is successful.
- Recommended Response Action
- No response action required.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6113
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to assign storage from the device arg1.
- Arguments
- arg1 = device ID
- Detailed Description
- Storage assignment from the device identified in the message is unsuccessful.
- Recommended Response Action
- Check the job execution history in the OpenManage Enterprise-Modular GUI for details on the error. Retry the operation after resolving this error.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6114
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Force Activation of SAS IOM device arg1 is successful.
- Arguments
- arg1 = device ID
- Detailed Description
- Force Activation of SAS IOM device identified in the message is successful.
- Recommended Response Action
- No response action required.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6115
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Clear Configuration operation on SAS IOM device arg1 is successful.
- Arguments
- arg1 = device ID
- Detailed Description
- The Clear Configuration operation on the SAS IOM device identified in the message is successful.
- Recommended Response Action
- No response action required.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6116
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Force Activation of SAS IOM device arg1 is unsuccessful.
- Arguments
- arg1 = device ID
- Detailed Description
- Force Activation of SAS IOM device identified in the message is unsuccessful.
- Recommended Response Action
- Check the job execution history in the OpenManage Enterprise-Modular GUI for details on the error. Retry the operation after resolving this error.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6117
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the Clear Configuration operation on the SAS IOM device arg1.
- Arguments
- arg1 = device ID
- Detailed Description
- The Clear Configuration operation cannot be completed on the SAS IOM device identified in the message.
- Recommended Response Action
- Check the job execution history in the OpenManage Enterprise-Modular GUI for details on the error. Retry the operation after resolving this error.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6118
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Extract logs from SAS IOM device arg1 successful.
- Arguments
- arg1 = device ID
- Detailed Description
- The Extract logs from SAS IOM device identified in the message is successful.
- Recommended Response Action
- No response action required.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6119
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Extract logs operation from SAS IOM device arg1 is unsuccessful.
- Arguments
- arg1 = device ID
- Detailed Description
- The Extract logs operation from SAS IOM device identified in the message is unsuccessful.
- Recommended Response Action
- Check the job execution history in the OpenManage Enterprise-Modular GUI for details on the error. Retry the operation after resolving this error.
- Category
- Storage (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6120
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the value entered in the field arg1 exceeds the maximum length of arg2 characters.
- Arguments
- arg1 = fieldName
- arg2 = maxLength
- Detailed Description
- The operation cannot be completed because the value entered in the mentioned field exceeds the allowed character limit.
- Recommended Response Action
- Enter a value less than the specified character limit and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6121
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because information is not entered in mandatory field(s) arg1.
- Arguments
- arg1 = field name
- Detailed Description
- The request cannot be processed because information is not entered in mandatory field(s).
- Recommended Response Action
- Enter valid data in the mandatory field(s) and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6122
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the number of entries provided for attribute : arg1 exceeds the allowed limit of arg2.
- Arguments
- arg1 = fieldName
- arg2 = entries
- Detailed Description
- The operation cannot be completed because the number of entries provided for the attribute identified in the message exceeds the allowed limit.
- Recommended Response Action
- Enter only the permitted number of entries in the payload.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6123
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the values entered for attribute arg1 has either duplicate or invalid IDs that do not exist.
- Arguments
- arg1 = fieldName
- Detailed Description
- The request cannot be processed because the values entered for attribute identified in the message has either duplicate or invalid IDs that do not exist.
- Recommended Response Action
- Enter valid and unique identifier values for the given attribute and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6124
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Successfully added to the Multi-chassis Management group arg1.
- Arguments
- arg1 = group
- Detailed Description
- Lead added this domain as a Member.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6125
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the native VLAN value is not required for Media Types such as FCoE, FC Gateway, and FC Direct Attach.
- Detailed Description
- The request cannot be processed because the native VLAN value is not required for Media Types such as FCoE, FC Gateway, and FC Direct Attach.
- Recommended Response Action
- Delete the native VLAN value and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6126
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update the network because the entered Native VLAN value arg1 is not within the valid range of arg2-arg3 or arg4-arg5.
- Arguments
- arg1 = arg2
- arg2 = arg3
- arg3 = arg4
- arg4 = arg5
- arg5 = arg6
- Detailed Description
- The network cannot be created or updated because entered Native VLAN value is not with the range identified in the message.
- Recommended Response Action
- Enter a valid Native VLAN value and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6127
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the entered Native VLAN value arg1 is same as the VLAN range already contained by the network.
- Arguments
- arg1 = vlan
- Detailed Description
- The request cannot be processed because the entered Native VLAN value is same as the VLAN range already contained by the network.
- Recommended Response Action
- Enter a unique Native VLAN value and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6128
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the uplink for FC Media Type (FCoE, FC Gateway and Direct Attach), can accept only one FC capable network.
- Detailed Description
- The request cannot be processed because the uplink for FC Media Type (FCoE, FC Gateway and Direct Attach), can accept only one FC capable network.
- Recommended Response Action
- Enter only a FC capable network and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6132
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A new device is detected in the chassis.
- Detailed Description
- A new device is detected in the chassis.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6133
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A new device arg1 is added in slot number arg2 for chassis arg3.
- Arguments
- arg1 = device identifier
- arg2 = device slot number
- arg3 = chassis service tag
- Detailed Description
- A new device is successfully inserted in the chassis.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6134
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A device arg1 is removed from slot number arg2 in chassis arg3.
- Arguments
- arg1 = device identifier
- arg2 = slot number
- arg3 = chassis service tag
- Detailed Description
- A device is removed from the chassis.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6136
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The request to join the Multi-chassis Management group arg1 is rejected.
- Arguments
- arg1 = group
- Detailed Description
- The request to join the Multi-chassis Management group identified in the message is rejected.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6137
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the uplink for FC Media Type (FCoE, FC Gateway, and Direct Attach) can accept port(s) only from the same IOM.
- Detailed Description
- The request cannot be processed because the uplink for FC Media Type (FCoE, FC Gateway, and Direct Attach) can accept port(s) only from the same IOM.
- Recommended Response Action
- Enter port(s) numbers that are from only the same IOM and then retry the operation. For more information see the OpenManageEnterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6138
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to communicate to the I/O Modules (IOMs) because either the IOMs are unavailable or not online.
- Detailed Description
- The I/O Modules (IOMs) cannot be communicated to because either the IOMs are unavailable or not online.
- Recommended Response Action
- Make sure that the IOMs are available and online in the system for use. For more information about IOMs, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6139
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the server profile, arg1, does not exist.
- Arguments
- arg1 = Server Profile Id
- Detailed Description
- The operation cannot be completed because the server profile identified in the message does not exist.
- Recommended Response Action
- Make sure that the following are correct and retry the operation: 1) The server profile entered is valid. 2) The server profile ID entered is valid.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6141
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect to the network share address because the network connection timed out.
- Detailed Description
- The network share address provided cannot be connected to because the network connection timed out.
- Recommended Response Action
- Enter a valid network share address and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6142
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Test Connection operation is successfully completed.
- Detailed Description
- The Test Connection operation is successfully completed.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6143
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the network share file folder because the necessary privileges are unavailable.
- Detailed Description
- The network share file folder cannot be accessed because the necessary privileges are unavailable.
- Recommended Response Action
- Make sure necessary access rights and privileges are available and retry the operation. Contact your system administrator. For more information about the levels of user privileges, see the Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6144
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the network share file folder.
- Detailed Description
- The network share file folder cannot be accessed.
- Recommended Response Action
- Make sure a valid network share file folder and network share address is entered with a supported share type version, and retry the operation. If the issue persists, perform reset or restart as applicable to the product. See the product Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6145
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to access the network share file folder because of network issues.
- Detailed Description
- The network share file folder cannot be accessed because of network issues.
- Recommended Response Action
- Make sure that a correct file folder path is entered, and then retry the operation. For more information, see the Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6146
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the Test Connection operation because the operation timed out.
- Detailed Description
- The Test Connection operation cannot be completed because the operation timed out.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your service provider. For more information, see the Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6147
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the Test Connection operation because the share file folder entered is a directory.
- Detailed Description
- The Test Connection operation cannot be completed because the share file folder entered is a directory.
- Recommended Response Action
- Enter a valid network share file folder path and retry the operation. For more information, see the Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6148
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect to the network share address because the network connection was refused.
- Detailed Description
- The network share address provided cannot be connected to because the network connection was refused.
- Recommended Response Action
- Enter a valid network share address and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6149
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to set the Service Tag of the device because it is already set.
- Detailed Description
- The Service Tag of the device cannot be set because it is already set.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6150
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update arg1 on the device: arg2.
- Arguments
- arg1 = operation name
- arg2 = error message
- Detailed Description
- Unable to updated the operation identified in the message on the device.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6151
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The leader chassis of the Multi-Chassis Management group does not have a backup chassis.
- Detailed Description
- No Backup has been assigned.
- Recommended Response Action
- Assign a member of the group as the backup chassis. For information about assigning a backup chassis, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6152
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Detected previous lead chassis arg1 online, transitioned it to member of the Multi-Chassis Management arg2.
- Arguments
- arg1 = service tag
- arg2 = group
- Detailed Description
- Former Lead Chassis was detected and transitioned to Member role.
- Recommended Response Action
- None.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6153
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Detected previous lead chassis arg1 online, transitioned it to a standalone and out of the Multi-Chassis Management arg2.
- Arguments
- arg1 = service tag
- arg2 = group
- Detailed Description
- Detected Former Lead and transitioned it as a standalone, out of the group.
- Recommended Response Action
- Unable to transition the old lead chassis to member of the Multi-Chassis Management, so removed it from the group. This transition may cause loss of fabric management functionality if any fabrics existed on the old lead chassis. Review fabric management and re-configure as needed.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6154
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Detected multiple lead chassis arg1 for the same Multi-Chassis Management arg2, unable to perform automatic recovery.
- Arguments
- arg1 = service tag
- arg2 = group
- Detailed Description
- Detected Multiple Leader Chassis in Group, Unable to recover.
- Recommended Response Action
- Perform the following steps for each old lead chassis1) Disconnect the stacking cable from the chassis.2) Execute racadm racresetcfg -forceAfter the above 2 steps, the old lead chassis will be transitioned to a standalone chassis and does not interfere with the functions of the existing lead chassis.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6155
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Detected previous backup chassis arg1 online, transitioned it to member of the Multi-Chassis Management arg2.
- Arguments
- arg1 = service tag
- arg2 = group
- Detailed Description
- Detected Former Backup Lead Chassis, and transitioned it to Member role.
- Recommended Response Action
- None.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6156
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Detected multiple backup chassis arg1 for the same Multi-Chassis Management arg2, unable to perform automatic recovery.
- Arguments
- arg1 = service tag
- arg2 = group
- Detailed Description
- Detected Multiple Backup Leader Chassis; Unable to recover.
- Recommended Response Action
- Perform the following steps for each backup chassis1) Execute leave group operation, this removes the backup chassis from the group and deletes all configuration related to backup.2) If group membership is desired, execute join group operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6157
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The request to update the server profile(s) is successfully submitted.
- Detailed Description
- The request to update the server profiles is successfully submitted.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6158
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the server profile(s) because invalid parameters are entered.
- Detailed Description
- The server profiles cannot be updated because invalid parameters are entered.
- Recommended Response Action
- Enter valid update parameters and retry the operation. For information about updating server profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6159
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The request to update the server profile(s) by using a generic template is successfully submitted.
- Detailed Description
- The request to update the server profiles by using a generic template is successfully submitted.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6160
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Update request, using generic template, for provided server profile(s) failed.
- Detailed Description
- The servers identified in the message could not be updated.
- Recommended Response Action
- Enter valid update parameters and retry the operation. For information about updating server profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6161
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The append networks request for server profile(s) was successfully submitted.
- Detailed Description
- The append networks request for server profile(s) was successfully submitted.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6162
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The append networks request for servers failed.
- Detailed Description
- The append networks request for servers failed.
- Recommended Response Action
- Enter valid update parameters and retry the operation. For information about appending server profiles to networks, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6163
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The delete networks request for server profile(s) was successfully submitted.
- Detailed Description
- The delete networks request for server profile(s) was successfully submitted.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6164
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The delete networks request for servers failed.
- Detailed Description
- The delete networks request for servers failed.
- Recommended Response Action
- Enter valid server update parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6165
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- An internal device is successfully removed.
- Detailed Description
- An internal device is successfully removed.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6166
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request to create group because the chassis is a member of another group.
- Detailed Description
- The requested operation to create group cannot be processed because the chassis is already a member of another group.
- Recommended Response Action
- Execute leave operation on the chassis and retry the request to create new group.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6167
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A request is successfully submitted to update the untagged network settings of server profile(s).
- Detailed Description
- A request is successfully submitted to update the untagged network settings of server profile(s).
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6168
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to submit the request to update the untagged network settings of server profile(s).
- Detailed Description
- A request cannot be submitted to update the untagged network settings of server profile(s).
- Recommended Response Action
- Enter valid data about the server profiles, and then retry the operation. For more information about updating untagged network settings, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6172
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Device health has improved.
- Detailed Description
- Device Health Changed to OK.
- Recommended Response Action
- No response action is required.
- Category
- System Health (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6173
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Device health is unknown.
- Detailed Description
- The device health status has changed.
- Recommended Response Action
- Check the device subsystems for components that require immediate attention. For information about device health statuses, see the Online Help by clicking the help icon. Also see the Users Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6175
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Device health has deteriorated.
- Detailed Description
- The device health status has changed.
- Recommended Response Action
- Check the device subsystems for components that require immediate attention. For information about device health statuses, see the Online Help by clicking the help icon. Also see the Users Guide available on the support site.
- Category
- System Health (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6176
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the VLAN because the target device arg1 does not have any VLANs to import.
- Arguments
- arg1 = device Name
- Detailed Description
- The VLAN cannot be imported because the target device identified in the message does not have any VLANs to import.
- Recommended Response Action
- Make sure that the target device has VLANs, and then retry the operation. If VLANs do not exist, create VLANs on the target device.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6177
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the entered Service Tag of the new switch is invalid.
- Detailed Description
- The request cannot be processed because the entered Service Tag of the new switch is invalid.
- Recommended Response Action
- Enter a valid Service Tag of the switch that is already discovered by the OpenManage Enterprise-Modular.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6178
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The switch replacement request for the fabric arg1 is successfully submitted.
- Arguments
- arg1 = fabric Name
- Detailed Description
- The switch replacement request for the fabric identified in the message is successfully submitted.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6179
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to replace the switch of fabric arg1 because arg2.
- Arguments
- arg1 = fabric Name
- arg2 = error Message From IOM
- Detailed Description
- The switch of the fabric identified in the message cannot be replaced.
- Recommended Response Action
- Enter a valid Service Tag of both the old and new switch and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6180
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the ScaleVLANProfile value provided is invalid.
- Detailed Description
- The request cannot be processed because the ScaleVLANProfile value provided is invalid.
- Recommended Response Action
- Enter a valid ScaleVLANProfile value (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6181
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the job to perform the arg1 opertion because of an internal error in the server.
- Arguments
- arg1 = operation name
- Detailed Description
- The job cannot be created to perform the operation identified in the message because of an internal error in the server.
- Recommended Response Action
- Wait for few minutes and retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6182
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The request operation failed at fabric manger due to request timed out or connection failure.
- Detailed Description
- The Request operation failed at fabric manager.
- Recommended Response Action
- Please review the current status of the fabric, before retrying the operation. Because in case of request timeout fabric manager may potentially go ahead and perform the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6190
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the fabric arg1. arg2.
- Arguments
- arg1 = fabric
- arg2 = message
- Detailed Description
- The fabric identified in the message could not be created.
- Recommended Response Action
- Enter valid fabric parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6191
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the fabric arg1. arg2.
- Arguments
- arg1 = fabric
- arg2 = message
- Detailed Description
- The fabric identified in the message cannot be updated because invalid fabric parameters are entered.
- Recommended Response Action
- Enter valid fabric parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6192
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The deletion request for fabric arg1 failed. arg2.
- Arguments
- arg1 = fabric
- arg2 = message
- Detailed Description
- The fabric identified in the message could not be deleted.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6193
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the uplink arg1 for fabric arg2. arg3.
- Arguments
- arg1 = uplink
- arg2 = fabric
- arg3 = message
- Detailed Description
- The uplink cannot not be created for the fabric identified in the message.
- Recommended Response Action
- Enter valid uplink parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6194
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the uplink arg1 for fabric arg2. arg3.
- Arguments
- arg1 = uplink
- arg2 = fabric
- arg3 = message
- Detailed Description
- The uplink cannot be updated for the fabric identified in the message.
- Recommended Response Action
- Enter valid uplink parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6195
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the uplink arg1 for fabric arg2. arg3.
- Arguments
- arg1 = uplink
- arg2 = fabric
- arg3 = message
- Detailed Description
- The uplink cannot be deleted for the fabric identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6196
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the multicast networks for fabric arg1.
- Arguments
- arg1 = fabric
- Detailed Description
- The multicast networks updatefor the givenfabric is not successful.
- Recommended Response Action
- Enter valid mutlicast parameters and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6197
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Refresh inventory when fabric manager capability change for firmware update.
- Detailed Description
- Refresh inventory whenfabric manager capability change for firmware update.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6198
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Quick Deploy settings are applied on arg1.
- Arguments
- arg1 = servicetag
- Detailed Description
- When user reinserts a compute, if quick deploy settings are not applied and their is no profile attached to the slot, then with out creating quick deploy job settings will be applied to the device and this audit log message will be added.
- Recommended Response Action
- Quick deploy settings are applied to the device.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6199
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Quick Deploy settings operation failed for arg1.
- Arguments
- arg1 = servicetag
- Detailed Description
- Applying quick deploy settings failed to apply on device.
- Recommended Response Action
- Quick deploy settings operation failed.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6200
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Debug capability Invoked.
- Detailed Description
- User invoked debug capability.
- Recommended Response Action
- No response actionrequired.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6201
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- FSD Disabled.
- Detailed Description
- User disabled FSD.
- Recommended Response Action
- No response action required.
- Category
- Audit (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6504
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform arg1 because arg2.
- Arguments
- arg1 = operation
- arg2 = reason
- Detailed Description
- The operation cannot becompleted because of the issue identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV6505
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation cannot be completed.
- Detailed Description
- Unable toperform share type testbecauseone or more task(s) using share is in progress.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7141
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Server NIC Bonding configuration operation for the server profile: arg1, because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Arguments
- arg1 = field1
- Detailed Description
- The Server NIC Bonding configuration operation cannot be performed for the server identified in the message, because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7142
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Server NIC Bonding configuration operation for the server arg1, because the necessary bonding technology is not provided.
- Arguments
- arg1 = server Name
- Detailed Description
- The Server NIC Bonding configuration operation cannot be performed for the server identified in the message, because the necessary bonding technology is not provided.
- Recommended Response Action
- Provide the necessary bonding technology and NIC Bonded value, and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7143
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform onboarding as the connection to the target could not be created.
- Detailed Description
- Unable to perform onboarding as the connection to the target could not be created.
- Recommended Response Action
- Make sure that the device ready and available for onboarding, and then retry the operation. For more information, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7144
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1. But the Fabric OverrideLLDPConfiguration is not configured, because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Arguments
- arg1 = arg1
- Detailed Description
- The Fabric OverrideLLDPConfiguration is not configured, because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Recommended Response Action
- Please update the firmware version of the I/O Module running the Fabric Manager if necessary. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7145
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Fabric creation request is submitted successfully. The OverrideLLDPConfiguration attribute is not provided in the payload, the Fabric LLDP configuration is set to Disabled by default.
- Detailed Description
- The Fabric LLDP configuration is disabled by default, in case the OverrideLLDPConfiguration attribute is not entered in the payload. Users needs to provide OverrideLLDPConfiguration to override the LLDP configuration.
- Recommended Response Action
- Please provide the OverrideLLDPConfiguration as Enabled in the Fabric update request, if the LLDP configuration needs to be overridden.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7146
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Fabric LLDP configuration operation on the fabric because the necessary OverrideLLDPConfiguration attribute entered in the Payload field is invalid.
- Detailed Description
- The Fabric LLDP configuration operation cannot be performed on the fabric because the OverrideLLDPConfiguration attribute entered in the Payload field is invalid.
- Recommended Response Action
- Enter a valid OverrideLLDPConfiguration attribute (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7147
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Ethernet - No Spanning Tree uplink creation operation, because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Detailed Description
- The Ethernet - No Spanning Tree uplink creation operation cannot be performed, because the firmware version of the I/O Module running the Fabric Manager does not support the creation feature.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7148
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the fabric VLAN pass-through configuration mode on the fabric because the necessary "FabricVlanPassThroughMode" attribute is not entered in the "payload" field.
- Detailed Description
- The fabric VLAN pass-through configuration mode on the fabric cannot be configured because the necessary "FabricVlanPassThroughMode" attribute is not entered in the "payload" field.
- Recommended Response Action
- Enter a valid FabricVlanPassThroughMode attribute (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7149
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the fabric VLAN pass-through configuration mode on the fabric because the firmware version of the I/O module running the fabric manager does not support the configuration feature.
- Detailed Description
- The fabric VLAN pass-through configuration mode on the fabric cannot be configured because the firmware version of the I/O module running the fabric manager does not support the configuration feature.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7150
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the Uplink Failure Detection mode on the uplink because the necessary UfdEnable attribute is not entered in the payload field.
- Detailed Description
- The Uplink Failure Detection mode on the uplink cannot be configured because the necessary UfdEnable attribute is not entered in the payload field.
- Recommended Response Action
- Enter the necessary UfdEnable attribute (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7151
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the Uplink Failure Detection mode on the uplink because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Detailed Description
- The Uplink Failure Detection mode on the uplink cannot be configured because the firmware version of the I/O Module running the Fabric Manager does not support the configuration feature.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7152
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Fabric VLAN pass through mode configuration operation on the fabric because the necessary FabricVlanPassThroughMode attribute entered in the Payload field is invalid.
- Detailed Description
- The Fabric VLAN pass through mode configuration operation cannot be performed on the fabric because the FabricVlanPassThroughMode attribute entered in the Payload field is invalid.
- Recommended Response Action
- Enter a valid FabricVlanPassThroughMode attribute (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7153
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Uplink Failure Detection configuration operation on the uplink because the necessary UfdEnable attribute entered in the Payload field is invalid.
- Detailed Description
- The Uplink Failure Detection configuration operation cannot be performed on the uplink because the necessary UfdEnable attribute is not entered in the payload field.
- Recommended Response Action
- Enter a valid UfdEnable attribute (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7154
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Fabric update is successful. The OverrideLLDPConfiguration attribute is not provided in the payload, so it preserves the previous value.
- Detailed Description
- The Fabric LLDP configuration is not updated, because the OverrideLLDPConfiguration attribute is not entered in the payload.
- Recommended Response Action
- Please update the Fabric with the OverrideLLDPConfiguration as Disabled or Enabled if necessary.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7155
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Request is submitted successfully. The AssignAllVLANsConfiguration attribute is not provided in the payload, the configuration is preserved or set to Disabled by default.
- Detailed Description
- The Assign All VLANs Configuration on the fabric cannot be configured because the necessary AssignAllVLANsConfiguration attribute is not entered in the payload field.
- Recommended Response Action
- Please provide the AssignAllVLANsConfiguration as Enabled in the Fabric update request, if the configuration needs to be overridden.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7156
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the Assign All VLANs Configuration on the fabric because the firmware version of the I/O module running the fabric manager does not support the configuration feature.
- Detailed Description
- The Assign All VLANs Configuration on the fabric cannot be configured because the firmware version of the I/O module running the fabric manager does not support the configuration feature.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7157
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the Assign All VLANs Configuration on the fabric because the necessary AssignAllVLANsConfiguration attribute entered in the Payload field is invalid.
- Detailed Description
- The Assign All VLANs configuration on the fabric cannot be performed on the fabric because the AssignAllVLANsConfiguration attribute entered in the Payload field is invalid.
- Recommended Response Action
- Enter a valid AssignAllVLANsConfiguration attribute (enabled or disabled), and then retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV7158
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the arg1 operation on the fabric because the firmware version of the I/O module running the fabric manager does not support the configuration feature.
- Arguments
- arg1 = featureName
- Detailed Description
- The operation cannot be completed on the fabric because the firmware version of the I/O module running the fabric manager does not support the configuration feature.
- Recommended Response Action
- Update the firmware version of the I/O Module running the Fabric Manager and retry the operation. For information about the recommended I/O Module firmware versions, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV8500
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Successfully disabled Replication Chassis Settings on IOM Device.
- Detailed Description
- Replication of applicable chassis configurations settings to all supported IOMs has been disabled successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV8501
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Replication of Chassis Settings will be applied only when IOM Device arg1 is online.
- Arguments
- arg1 = device Name
- Detailed Description
- The operation to Replicate Chassis Settings failed as IOM is not online.
- Recommended Response Action
- Please try bring your IOM online. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV8502
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The device arg1 was not subscribed to the Redfish event during onboarding.
- Arguments
- arg1 = device_name
- Detailed Description
- The device was not subscribed to the Redfish event during onboarding.
- Recommended Response Action
- Enable alert reception from discovered devices during onboarding to subscribe to Redfish events.
- Category
- Audit (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9000
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- This device and several others has become non compliant after running compliance task:arg1.
- Arguments
- arg1 = task Name
- Detailed Description
- A device has become non compliant.
- Recommended Response Action
- Update the device or component firmware using a catalog or update package.
- Category
- Audit (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The mutlicast networks for fabric arg1 is successfully updated.
- Arguments
- arg1 = fabric
- Detailed Description
- The multicast networks is successfully updated for the providedfabric.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to attach the profile arg1 with the slot or device arg2 because: arg3.
- Arguments
- arg1 = profile Name
- arg2 = Identifier
- arg3 = Reason
- Detailed Description
- The profile cannot be attached with the slot or device as identified in the message because of the reasons indicated in the message.
- Recommended Response Action
- Review the reason and initiate necessary action.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to migrate the profile arg1 from the slot or device arg2 to the slot or device arg3 because: arg4.
- Arguments
- arg1 = profile Name
- arg2 = Source Identifier
- arg3 = Destination Identifier
- arg4 = reason
- Detailed Description
- The profile cannot be migrated from the slot or device to the slot or device as identified in the message because of the reasons indicated in the message.
- Recommended Response Action
- Review the reason and initiate necessary action.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9030
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Network Controller group information is successfully updated.
- Detailed Description
- The Network Controller group information successfully updated.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9031
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to sync the settings of MCM member arg1 for the Setting IDs arg2.
- Arguments
- arg1 = member Name
- arg2 = ID Names
- Detailed Description
- The settings of MCM member cannot by synced for the Settings IDs identified in the message.
- Recommended Response Action
- Check the logs for more details.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9032
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The MCM member arg1 settings are successfully applied to arg2.
- Arguments
- arg1 = member name 1
- arg2 = name
- Detailed Description
- The MCM member settings are successfully applied as identified in the message.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9746
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to successfully complete the "Create" operation because the property name arg1 is not entered.
- Arguments
- arg1 = property Name
- Detailed Description
- The "Create" operation cannot be successfully completed because the property name is not entered.
- Recommended Response Action
- Enter a valid property name and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9765
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The OpenManage Enterprise-Modular appliance bundle download operation is in progress.
- Detailed Description
- The OpenManage Enterprise-Modular appliance bundle download operation is in progress.
- Recommended Response Action
- No response action is required.
- Category
- Miscellaneous (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9988
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Replication of Chassis Settings for arg1 was successfully submitted on the IOM Device arg2 with following error(s):arg3.
- Arguments
- arg1 = settingType
- arg2 = deviceName
- arg3 = errorMsg
- Detailed Description
- The operation to Replicate Chassis Settings failed. Retry the operation.
- Recommended Response Action
- The operation to Replicated Chassis Settings failed. Retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9989
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Replication of Chassis Settings for arg1 on IOM Device arg2 was successful.
- Arguments
- arg1 = settingType
- arg2 = deviceName
- Detailed Description
- The operation to Replicate Chassis Settings is successful.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9990
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation to validate VLAN profile(s) is successful.
- Detailed Description
- The operation to validate VLAN profile(s) is successful.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9991
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation to validate VLAN profile(s) failed. Retry the operation.
- Detailed Description
- The operation to validate VLAN profile(s) failed. Retry the operation.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9992
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job created to import all valid VLAN profile(s) is successful.
- Detailed Description
- The job created to import all valid VLAN profile(s) is successful.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9993
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The export operation to retrieve VLAN profile(s) failed. Retry the operation.
- Detailed Description
- The export operation to retrieve VLAN profile(s) failed. Retry the operation.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9994
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The export operation to retrieve VLAN profile(s) is successful.
- Detailed Description
- The export operation to retrieve VLAN profile(s) is successful.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9995
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The job created to import all valid VLAN profile(s) failed. Retry the operation.
- Detailed Description
- The job created to import all valid VLAN profile(s) failed. Retry the operation.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9996
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to initiate replication of applicable chassis configuration settings to all supported IOMs.
- Detailed Description
- Unable to initiate replication of applicable chassis configuration settings to all supported IOMs.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9997
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Replication of applicable chassis configuration settings to all supported IOMs has been initiated successfully.
- Detailed Description
- Replication of applicable chassis configuration settings to all supported IOMs has been initiated successfully.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9998
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Date and time change operation has been initiated.
- Detailed Description
- Date and time change operation has been initiated.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CDEV = Devices)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CDEV9999
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Reset to defaults is not supported on a lead chassis in the MCM group.
- Detailed Description
- The lead group properties cannot be reset.
- Recommended Response Action
- Dissolve the lead group and retry the operation.
- Category
- Configuration (CDEV = Devices)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\