PowerEdge Servers Error and Event Messages Reference Guide
CGEN—Generic Event Messages
CGEN1001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the user is not authenticated.
- Detailed Description
- The operation cannot be completed because the user is not authenticated.
- Recommended Response Action
- Log in with valid credentials and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the requested URI is invalid.
- Detailed Description
- The operation cannot be completed because the requested URI is invalid.
- Recommended Response Action
- Enter a valid URI and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because an empty payload is not allowed for this request.
- Detailed Description
- The operation cannot be completed because an empty payload is not allowed for this request.
- Recommended Response Action
- Enter a valid payload and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the requested action because the logged in user is not authorized to perform this operation.
- Detailed Description
- The operation cannot be completed because the logged in user is not authorized to perform this action.
- Recommended Response Action
- Log in with a user that has the correct permissions for this action and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because the resource URI does not exist or is not implemented.
- Detailed Description
- The request cannot be completed because the resource URI does not exist of is not implemented.
- Recommended Response Action
- Enter a valid URI and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the requested action because the value for arg1 in the arg2 entity is invalid.
- Arguments
- arg1 = property
- arg2 = entity
- Detailed Description
- The operation cannot be completed because the property identified in the message is invalid.
- Recommended Response Action
- Enter a valid value for the property identified in the message and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because an error occurred.
- Detailed Description
- The operation cannot be completed because an error occurred.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the device management endpoint authentication over arg1 failed.
- Arguments
- arg1 = protocol
- Detailed Description
- The operation cannot be completed because the connection with the target device is not authenticated.
- Recommended Response Action
- Make sure the credentials associated with the device management endpoint are valid and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because a connection timeout occurred with device management endpoint over arg1.
- Arguments
- arg1 = protocol
- Detailed Description
- The operation cannot be completed because a device connection timeout occurred.
- Recommended Response Action
- Make sure the device is available and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the requested action because the service is unavailable over arg1.
- Arguments
- arg1 = protocol
- Detailed Description
- The operation cannot be completed because the requested service is unavailable.
- Recommended Response Action
- Make sure the requested service is available and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Reset the temporary account password for your user ID arg1 using the appliance or the AccountService API. For detailed instructions, refer the API documentation.
- Arguments
- arg1 = userId
- Detailed Description
- The temporary account password can be reset from the appliance or through the AccountService API.
- Recommended Response Action
- Reset your temporary password.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to connect to the device over arg1 because a connection error occurred.
- Arguments
- arg1 = protocol
- Detailed Description
- The operation cannot be completed because a connection error occurred while trying to connect to the device.
- Recommended Response Action
- Make sure that the target device is available and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1014
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because an invalid value is entered for the property arg1.
- Arguments
- arg1 = payload error information
- Detailed Description
- The operation cannot be completed because an invalid value is entered for the property identified in the message.
- Recommended Response Action
- Enter a valid value for the property and retry the operation. For more information about valid values, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because of an invalid property arg1 .
- Arguments
- arg1 = property
- Detailed Description
- The operation cannot be completed because an invalid property is entered in the payload.
- Recommended Response Action
- Verify the identified property is valid in the message and retry the operation with valid payload.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the value entered in the field Name supports only alphanumeric and space characters.
- Detailed Description
- The request cannot be processed because the Name field supports only alphanumeric and space characters.
- Recommended Response Action
- Make sure to enter a valid value for Name and then retry the operation. For information about supported characters, see the OpenManage Enterprise-Modular Users Guide.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the value entered in the field Description supports only alphanumeric, space and period characters.
- Detailed Description
- The request cannot be processed because the Description field supports only alphanumeric, space and period characters.
- Recommended Response Action
- Make sure to enter a valid value for Description and then retry the operation. For information about supported characters, see the OpenManage Enterprise-Modular Users Guide.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the internal services are either not started yet or could not be started due to unknown error.
- Detailed Description
- Internal services to process the request are not available at this time. This might be due to services are either not started yetor could not be started because of unknown error.
- Recommended Response Action
- Make sure that the services are started and retry operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the entered device ID arg1 is invalid.
- Arguments
- arg1 = device Id
- Detailed Description
- The operation cannot be completed because the entered device ID is invalid.
- Recommended Response Action
- Enter a valid device ID and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the configuration properties because either an invalid payload syntax or property attributes are entered arg1.
- Arguments
- arg1 =
- Detailed Description
- The configuration properties cannot be updated because either an invalid payload syntax or property attributes are entered.
- Recommended Response Action
- Enter valid payload syntax and property attributes, and then retry the operation. For information about resource URI and its properties, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN1103
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because arg1 is empty or missing.
- Arguments
- arg1 = parameter
- Detailed Description
- Unable to process the request because a parameter identified in the message is missing.
- Recommended Response Action
- Enter the missing value identified in the message and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN4017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the mandatory field arg1 is null or empty.
- Arguments
- arg1 = field name
- Detailed Description
- The operation cannot be completed because the mentioned field is mandatory for processing the request.
- Recommended Response Action
- Make sure that the field is not null or empty and then retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN4018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the value entered in the field arg1 exceeds the maximum length of arg2 characters.
- Arguments
- arg1 = fieldName
- arg2 = maxLength
- Detailed Description
- The operation cannot be completed because the value entered in the mentioned field exceeds the allowed character limit.
- Recommended Response Action
- Enter a value less than the specified character limit and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN4019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to set the LcdOverridePin value because the value entered is not a numeric of arg1 digits.
- Arguments
- arg1 = GlobalLength
- Detailed Description
- The LcdOverridePin value cannot be set because the value entered is not a numeric that matches the specified pin length.
- Recommended Response Action
- Enter a valid LcdOverridePin value that matches the value of pin length specified in the message to set the pin or an empty string to reset the pin, and then retry the operation. For more information about setting the LcdOverridePin values, see the OpenManageEnterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN4020
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to set the LcdOverridePin value because the operation is not supported in the current LCD configuration mode.
- Detailed Description
- The LcdOverridePin value cannot be reset because the reset operation is not supported in the current LCD Configuration mode.
- Recommended Response Action
- Make sure that LCD is present to set or reset the LcdOverridePin, and then retry the operation. For more information about setting the LcdOverridePin values, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN4021
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because the input value for LcdPinLength is invalid.
- Detailed Description
- LcdPinLength is read only attribute and the value must be 6.
- Recommended Response Action
- Make sure the value for an attribute LcdPinLength is "6" and retry the operation. Refer to the OpenManage Enterprise-Modular Users Guide for more information about LcdPinLength.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN4036
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the payload cannot be null.
- Detailed Description
- The operation cannot be completed because the entered payload is null.
- Recommended Response Action
- Enter a valid payload and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because an error occurred: arg1.
- Arguments
- arg1 = error message
- Detailed Description
- The operation cannot be completed because of the error identified in the message.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because the input value for arg1 is missing or an invalid value is entered.
- Arguments
- arg1 = argument
- Detailed Description
- The operation cannot be completed because the specified input value is missing or an invalid value is entered.
- Recommended Response Action
- Enter a valid value and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the requested operation because required device information is not entered.
- Detailed Description
- The operation cannot be completed because the necessary device information is not entered.
- Recommended Response Action
- Make sure that all information is valid and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because of a configuration error in the infrastructure layer.
- Detailed Description
- The operation cannot be completed because of a configuration error in the infrastructure layer.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because of an internal error.
- Detailed Description
- The request cannot be processed because of an internal error.
- Recommended Response Action
- Retry the operation. If the issue persists, contact your system administrator.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6038
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the action because the value entered for arg1 is invalid.
- Arguments
- arg1 = argument
- Detailed Description
- The operation cannot be completed because the input parameter identified in the message is invalid.
- Recommended Response Action
- Enter valid input values and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6041
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to read or write the file because an I/O error occurred.
- Detailed Description
- The operation cannot be completed because an I/O error occurred.
- Recommended Response Action
- Retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6042
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upload the file because the provided byte stream is null.
- Detailed Description
- The file cannot be uploaded because the provided byte stream is null.
- Recommended Response Action
- Ensure that the byte stream is not null and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6043
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upload the file because the byte stream size arg1 exceeds the maximum allowed file size of arg2.
- Arguments
- arg1 = file Size
- arg2 = max size
- Detailed Description
- The file cannot be uploaded because the provided byte stream size is greater than the maximum allowed size identified in the message.
- Recommended Response Action
- Ensure that the byte stream is not greater than the maximum size and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6044
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the configuration because the device arg1 does not exist.
- Arguments
- arg1 = deviceId
- Detailed Description
- The device identified in the message cannot be configured because the device does not exist.
- Recommended Response Action
- Enter a valid device ID and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- OMSA Event ID
- ENUM_DEVICE_DOES_NOT_EXIST
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6045
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to replicate the configuration of chassis to the device because the device does not support the capability to replicate from the chassis.
- Detailed Description
- The configuration of chassis cannot be replicated to the device because the device does not support the capability to replicate from the chassis.
- Recommended Response Action
- Select a chassis that supports the replication capabilities of the device, and then retry configuring the device.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6047
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because invalid replication type is entered.
- Detailed Description
- The operation cannot be completed because invalid replication type is entered.
- Recommended Response Action
- Enter a valid replication type and retry the operation. For information about valid replication types, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6048
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to run the following commands: arg1.
- Arguments
- arg1 = commands
- Detailed Description
- The commands identified in the message cannot be run because of the reasons identified in the log data.
- Recommended Response Action
- View the log data and initiate necessary action.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6050
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because of invalid arg1.
- Arguments
- arg1 = fieldName
- Detailed Description
- The operation cannot be completed because the specified input value is missing or an invalid value is entered.
- Recommended Response Action
- Enter a valid value and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6051
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because a database operation is unsuccessful.
- Detailed Description
- The operation cannot be completed because a database operation is unsuccessful. For more information about the unsuccessful operation, see the application log file.
- Recommended Response Action
- Retry the operation. If the issue persists, contact yourOpenManage Enterprise-Modular administrator.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6052
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because data is not available or is not implemented for the resource URI.
- Detailed Description
- The request cannot be completed because data is not available or is not implemented for the resource URI.
- Recommended Response Action
- Check the request resource URI. Refer to the OpenManage Enterprise-Modular Users Guide for more information about resource URI and its properties.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN6053
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation cannot be completed because the provided input value is higher than the default value. The value should be less or equal to the default value.
- Detailed Description
- The operation cannot be completed because the provided input value is higher than the default value. The value should be less or equal to the default value.
- Recommended Response Action
- Enter a value that is less or equal to the default value and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the fields arg1 cannot be combined in a single request.
- Arguments
- arg1 = field names
- Detailed Description
- The request cannot be processed because of incompatible fields as identified in the message.
- Recommended Response Action
- Remove all incompatible fields identified in the message except one and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the domain information cannot be retrieved.
- Detailed Description
- The request cannot be processed because the domain information cannot be retrieved.
- Recommended Response Action
- Verify the status of the database and domain configuration, and then retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the operation on the device due to the following reason(s): device unreachable or invalid credentials or invalid task parameters provided or device is in lockdown mode or the EULA is not accepted on the device.
- Detailed Description
- Unable to perform the operation on the device due to the following reason(s): device unreachable or invalid credentials or invalid task parameters provided or device is in lockdown mode or the SupportAssist End User License Agreement (EULA) is not accepted on the device.
- Recommended Response Action
- Verify the status of the database and domain configuration, and then retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Propagating arg1 configuration to member arg2.
- Arguments
- arg1 = replication types
- arg2 = servicetag
- Detailed Description
- Propagating configuration from lead to member identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Apply Configuration job arg1 is successfully created.
- Arguments
- arg1 = jobID
- Detailed Description
- The Apply Configuration job identified in the message is successfully created.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete one or more devices because there running jobs associated with the device(s).
- Detailed Description
- Unable to delete one or more devices because there running jobs associated with the device(s).
- Recommended Response Action
- Do not delete the device while jobs are running.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the requested operation because arg1.
- Arguments
- arg1 = reason message
- Detailed Description
- The requested operation cannot be completed because of the reason identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN8013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because of invalid certificate.
- Detailed Description
- Unable to complete the request because of invalid certificate.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9111
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the data is not entered in the mandatory field(s) arg1.
- Arguments
- arg1 = fieldName
- Detailed Description
- The request cannot be processed because the data is not entered in the mandatory field(s) as identified in the message.
- Recommended Response Action
- Enter valid data in the mandatory fields and retry the operation.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9112
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the type arg1 entered for the field arg2 is not supported.
- Arguments
- arg1 = type Name
- arg2 = field Name
- Detailed Description
- The operation cannot be completed because the type entered for the field is not supported as identified in the message.
- Recommended Response Action
- Enter the correct type in the mandatory fields and retry the operation. For information about the recommended input types, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9116
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to validate the share type arg1 because arg2.
- Arguments
- arg1 = shareType
- arg2 = reason
- Detailed Description
- The share type cannot be validated because of the issue identified in the message.
- Recommended Response Action
- Check the logs for more details.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9120
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A general error has occurred. See ExtendedInfo for more information.
- Detailed Description
- Indicates that a general error has occurred.
- Recommended Response Action
- See ExtendedInfo for more information.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9121
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The property arg1 is a required property and must be included in the request.
- Arguments
- arg1 = Name
- Detailed Description
- Indicates that a required property was not supplied as part of the request.
- Recommended Response Action
- Ensure that the property is in the request body and has a valid value and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9122
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The action arg1 requires the parameter arg2 to be present in the request body.
- Arguments
- arg1 = operation Name
- arg2 = resource Block Id
- Detailed Description
- Indicates that the action requested was missing a parameter that is required to process the action.
- Recommended Response Action
- Supply the action with the required parameter in the request body when the request is resubmitted.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9123
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The action arg1 was submitted with with the invalid parameter arg2.
- Arguments
- arg1 = Resource Block Id
- arg2 = Resource Block Value
- Detailed Description
- Indicates that an action was submitted but a parameter supplied did not match any of the known parameters.
- Recommended Response Action
- Correct the invalid parameter and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9724
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The property arg1 was duplicated in the request.
- Arguments
- arg1 = property Name
- Detailed Description
- Indicates that a duplicate property was included in the request body.
- Recommended Response Action
- Remove the duplicate property from the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9725
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The property arg1 is not in the list of valid properties for the resource.
- Arguments
- arg1 = property name
- Detailed Description
- Indicates that an unknown property was included in the request body.
- Recommended Response Action
- Remove the unknown property from the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9726
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the property arg2 is of a different type than the property can accept.
- Arguments
- arg1 = value
- arg2 = name
- Detailed Description
- Indicates that a property was given the wrong value type, such as when a number is supplied for a property that requires a string.
- Recommended Response Action
- Correct the value for the property in the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9727
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the property arg2 is of a different format than the property can accept.
- Arguments
- arg1 = value
- arg2 = name
- Detailed Description
- Indicates that a property was given the correct value type but the value of that property was not supported. This includes value size/length exceeded.
- Recommended Response Action
- Correct the value for the property in the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9728
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the property arg2 is not in the list of acceptable values.
- Arguments
- arg1 = value
- arg2 = name
- Detailed Description
- Indicates that a property was given the correct value type but the value of that property was not supported. This values not in an enumeration.
- Recommended Response Action
- Choose a value from the enumeration list that the implementation can support and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9729
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The property arg1 is a read only property and cannot be assigned a value.
- Arguments
- arg1 = name
- Detailed Description
- Indicates that a property was given a value in the request body, but the property is a readonly property.
- Recommended Response Action
- Remove the property from the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9730
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The request body submitted was malformed JSON and could not be parsed by the receiving service.
- Detailed Description
- Indicates that the request body was malformed JSON. Could be duplicate, syntax error,etc.
- Recommended Response Action
- Ensure that the request body is valid JSON and resubmit the request.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9731
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The action arg1 is not supported by the resource.
- Arguments
- arg1 = action Name
- Detailed Description
- Indicates that the action supplied with the POST operation is not supported by the resource.
- Recommended Response Action
- The action supplied cannot be resubmitted to the implementation. Perhaps the action was invalid, the wrong resource was the target or the implementation documentation may be of assistance.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9732
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The action arg1 was submitted with more than one value for the parameter arg2.
- Arguments
- arg1 = action Name
- arg2 = parameter Value
- Detailed Description
- Indicates that the action was supplied with a duplicated parameter in the request body.
- Recommended Response Action
- Resubmit the action with only one instance of the parameter in the request body if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9733
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the parameter arg2 in the action arg3 is of a different type than the parameter can accept.
- Arguments
- arg1 = value
- arg2 = parameter
- arg3 = action
- Detailed Description
- Indicates that a parameter was given the wrong value type, such as when a number is supplied for a parameter that requires a string.
- Recommended Response Action
- Correct the value for the parameter in the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9734
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the parameter arg2 in the action arg3 is of a different format than the parameter can accept.
- Arguments
- arg1 = value
- arg2 = parameter
- arg3 = action
- Detailed Description
- Indicates that a parameter was given the correct value type but the value of that parameter was not supported. This includes value size/length exceeded.
- Recommended Response Action
- Correct the value for the parameter in the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9735
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The parameter arg1 for the action arg2 is not supported on the target resource.
- Arguments
- arg1 = parameter
- arg2 = action
- Detailed Description
- Indicates that the parameter supplied for the action is not supported on the resource.
- Recommended Response Action
- Remove the parameter supplied and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9736
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the query parameter arg2 is of a different type than the parameter can accept.
- Arguments
- arg1 = value
- arg2 = parameter
- Detailed Description
- Indicates that a query parameter was given the wrong value type, such as when a number is supplied for a query parameter that requires a string.
- Recommended Response Action
- Correct the value for the query parameter in the request and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9737
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the parameter arg2 is of a different format than the parameter can accept.
- Arguments
- arg1 = value
- arg2 = parameter
- Detailed Description
- Indicates that a query parameter was given the correct value type but the value of that parameter was not supported. This includes value size/length exceeded.
- Recommended Response Action
- Correct the value for the query parameter in the request and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9738
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The value arg1 for the query parameter arg2 is out of range arg3.
- Arguments
- arg1 = value
- arg2 = parameter
- arg3 = range
- Detailed Description
- Indicates that a query parameter was supplied that is out of range for the given resource. This can happen with values that are too low or beyond that possible for the supplied resource, such as when a page is requested that is beyond the last page.
- Recommended Response Action
- Reduce the value for the query parameter to a value that is within range, such as a start or count value that is within bounds of the number of resources in a collection or a page that is within the range of valid pages.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9739
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Querying is not supported on the requested resource.
- Detailed Description
- Indicates that query is not supported on the given resource, such as when a start/count query is attempted on a resource that is not a collection.
- Recommended Response Action
- Remove the query parameters and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9740
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Querying is not supported by the implementation.
- Detailed Description
- Indicates that query is not supported on the implementation.
- Recommended Response Action
- Remove the query parameters and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9741
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The session establishment failed due to the number of simultaneous sessions exceeding the limit of the implementation.
- Detailed Description
- Indicates that a session establishment has been requested but the operation failed due to the number of simultaneous sessions exceeding the limit of the implementation.
- Recommended Response Action
- Reduce the number of other sessions before trying to establish the session or increase the limit of simultaneous sessions (if supported).
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9742
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The event subscription failed due to the number of simultaneous subscriptions exceeding the limit of the implementation.
- Detailed Description
- Indicates that a event subscription establishment has been requested but the operation failed due to the number of simultaneous connection exceeding the limit of the implementation.
- Recommended Response Action
- Reduce the number of other subscriptions before trying to establish the event subscription or increase the limit of simultaneous subscriptions (if supported).
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9743
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The delete request failed because the resource requested cannot be deleted.
- Detailed Description
- Indicates that a delete operation was attempted on a resource that cannot be deleted.
- Recommended Response Action
- Do not attempt to delete a non-deletable resource.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9744
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The change to the requested resource failed because the resource is in use or in transition.
- Detailed Description
- Indicates that a change was requested to a resource but the change was rejected due to the resource being in use or transition.
- Recommended Response Action
- Remove the condition and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9745
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The requested resource already exists.
- Detailed Description
- Indicates that a resource change or creation was attempted but that the operation cannot proceed because the resource already exists.
- Recommended Response Action
- Do not repeat the create operation as the resource has already been created.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9747
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- There is no valid session established with the implementation.
- Detailed Description
- Indicates that the operation failed because a valid session is required in order to access any resources.
- Recommended Response Action
- Establish as session before attempting any operations.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9748
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- There are insufficient privileges for the account or credentials associated with the current session to perform the requested operation.
- Detailed Description
- Indicates that the credentials associated with the established session do not have sufficient privileges for the requested operation.
- Recommended Response Action
- Either abandon the operation or change the associated access rights and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9749
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The account was successfully modified.
- Detailed Description
- Indicates that the account was successfully modified.
- Recommended Response Action
- No resolution is required.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9750
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The account modification request failed.
- Detailed Description
- Indicates that the modification requested for the account was not successful.
- Recommended Response Action
- The modification may have failed due to permission issues or issues with the request body.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9751
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The account is successfully removed.
- Detailed Description
- The account is successfully removed.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9752
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The account for the current session has been removed, thus the current session has been removed as well.
- Detailed Description
- Indicates that the account for the session has been removed, thus the session has been removed as well.
- Recommended Response Action
- Attempt to connect with a valid account.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9753
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The object at arg1 is invalid.
- Arguments
- arg1 = question
- Detailed Description
- Indicates that the object in question is invalid according to the implementation. Examples include a firmware update malformed URI.
- Recommended Response Action
- Either the object is malformed or the URI is not correct. Correct the condition and resubmit the request if it failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9754
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The service detected a malformed request body that it was unable to interpret.
- Detailed Description
- Indicates that the service encountered an unrecognizable request body that could not even be interpreted as malformed JSON.
- Recommended Response Action
- Correct the request body and resubmit the request if it failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9755
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The resource at the URI arg1 was not found.
- Arguments
- arg1 = resource
- Detailed Description
- Indicates that the operation expected an image or other resource at the provided URI but none was found. Examples of this are in requests that require URIs like Firmware Update.
- Recommended Response Action
- Place a valid resource at the URI or correct the URI and resubmit the request.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9756
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The resource at arg1 is in a format not recognized by the service.
- Arguments
- arg1 = resource
- Detailed Description
- Indicates that the URI was valid but the resource or image at that URI was in a format not supported by the service.
- Recommended Response Action
- Place an image or resource or file that is recognized by the service at the URI.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9757
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The create operation failed because the resource has reached the limit of possible resources.
- Detailed Description
- Indicates that no more resources can be created on the resource as it has reached its create limit.
- Recommended Response Action
- Either delete resources and resubmit the request if the operation failed or do not resubmit the request.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9758
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation failed because the service is shutting down and can no longer take incoming requests.
- Detailed Description
- Indicates that the operation failed as the service is shutting down, such as when the service reboots.
- Recommended Response Action
- When the service becomes available, resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9759
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The operation failed because the service is in an unknown state and can no longer take incoming requests.
- Detailed Description
- Indicates that the operation failed because the service is in an unknown state and cannot accept additional requests.
- Recommended Response Action
- Restart the service and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9760
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- While accessing the resource at arg1, the service received an authorization error arg2.
- Arguments
- arg1 = uri
- arg2 = error
- Detailed Description
- Indicates that the attempt to access the resource/file/image at the URI was unauthorized.
- Recommended Response Action
- Ensure that the appropriate access is provided for the service in order for it to access the URI.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9761
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Resource Zone arg1 is updated on the service.
- Arguments
- arg1 = zone 1
- Detailed Description
- The Resource Zone identified in the message is updated. To view the updated information, refresh the cached version of the Resource Zone.
- Recommended Response Action
- No response action is required.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9762
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the Resource Zone because of an internal issue.
- Detailed Description
- The Resource Zone cannot be updated because of an internal issue.
- Recommended Response Action
- Restart the service and resubmit the request if the operation failed. For more information about updating resource zones, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9763
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the Resource Block arg1.
- Arguments
- arg1 = Resource Block 1
- Detailed Description
- The Resource Block identified in the message cannot be updated.
- Recommended Response Action
- Remove the condition and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9764
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the request because the Resource Block arg1 is unavailable in the system.
- Arguments
- arg1 = Resource Block 1
- Detailed Description
- The operation cannot be completed because the Resource Block identified in the message is unavailable in the system.
- Recommended Response Action
- Remove the unknown property from the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9765
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because the Zone arg1 is unavailable in the system.
- Arguments
- arg1 = Zone 1
- Detailed Description
- The operation cannot be completed because the Zone identified in the message is unavailable in the system.
- Recommended Response Action
- Remove the unknown property from the request body and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9766
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to assign the Resource arg1 to the Zone arg2.
- Arguments
- arg1 = Resource Block 1
- arg2 = Zone 1
- Detailed Description
- The Resource Block identified in the message cannot be assigned to the Zone.
- Recommended Response Action
- Remove the condition and resubmit the request if the operation failed.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9767
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to display the updated information from the service because the resource block arg1 has changed on the service.
- Arguments
- arg1 = Resource Block ID
- Detailed Description
- The updated information from the service cannot be displayed because the resource block identified in the message has changed on the service.
- Recommended Response Action
- Refresh the cached version of the resource block and retry the operation.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9768
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to display the updated information from the service because the resource block arg1 has changed on the service.
- Arguments
- arg1 = Resource Block ID
- Detailed Description
- The updated information from the service cannot be displayed because the resource block identified in the message has changed on the service. Specifically, the value of the Status, State property has changed.
- Recommended Response Action
- Refresh the cached version of the resource block and retry the operation. To refresh the resource block.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9769
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to display the updated information from the service because the composition status of the resource block arg1 has changed on the service.
- Arguments
- arg1 = Resource Block ID
- Detailed Description
- The updated information from the service cannot be displayed because the composition status of the resource block identified in the message has changed on the service. Specifically, the value of the CompositionStatus.CompositionState property has changed.
- Recommended Response Action
- Refresh the cached version of the resource block and retry the operation. To refresh the resource block.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9770
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to display the updated information from the service because the membership of the resource zone arg1 has changed on the service.
- Arguments
- arg1 = Resource Zone ID
- Detailed Description
- The updated information from the service cannot be displayed because the membership of the resource zone identified in the message has changed on the service. The resource zone has changed because resource blocks are either added to or removed from the resource zone.
- Recommended Response Action
- Refresh the cached version of the resource zone and retry the operation.
- Category
- Audit (CGEN = Generic)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9771
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the composition request because the resource block arg1 cannot be a part of any new composition.
- Arguments
- arg1 = resource Block ID
- Detailed Description
- The composition request cannot be processed because the resource block identified in the message cannot be a part of any new composition.
- Recommended Response Action
- Remove the resource block from the request and retry the operation.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9772
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the composition request because the chassis arg1 must be powered on.
- Arguments
- arg1 = chassis ID
- Detailed Description
- The composition request cannot be processed because the chassis identified in the message must be powered on.
- Recommended Response Action
- Power on the chassis and retry the operation.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9773
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the composition request because the chassis arg1 must be powered off.
- Arguments
- arg1 = chassis ID
- Detailed Description
- The composition request cannot be processed because the chassis identified in the message must be powered off.
- Recommended Response Action
- Power off the chassis and retry the operation.
- Category
- Audit (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9774
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because either a value is not entered or an invalid value is entered for arg1.
- Arguments
- arg1 = input
- Detailed Description
- The operation cannot be completed because either a value is not entered or an invalid value is entered.
- Recommended Response Action
- Enter a valid value and retry the operation. For more information, see the latest OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9775
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to get the validation results of the backup file from Job Id: arg1.
- Arguments
- arg1 = jobId
- Detailed Description
- Failed to validate the backup file, unable to continue with the restore operation.
- Recommended Response Action
- Please check the validation job details for additional information.
- Category
- Configuration (CGEN = Generic)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGEN9819
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform this operation because one or more selected users are not local users.
- Detailed Description
- Unable to perform this operation because one or more selected users are not local users.
- Recommended Response Action
- Select a local user with a valid email address and try again.
- Category
- Configuration (CGEN = Generic)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\