PowerEdge Servers Error and Event Messages Reference Guide
CGRP—Groups Event Messages
CGRP1345
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or remove the user from the group because the user ID is invalid.
- Detailed Description
- The user cannot be added or removed from the group because the entered user ID is invalid.
- Recommended Response Action
- Enter a valid user ID and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1346
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Invalid value provided for the parent id arg1.
- Arguments
- arg1 = pid
- Detailed Description
- Invalid value provided for the parent id.
- Recommended Response Action
- Ensure that the value of the parent id is valid - it has to be an existing group id and has to conform to physical grouping hierarchy restrictions if applicable.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1347
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Duplicate attribute definitions provided.
- Detailed Description
- Payload provided contains duplicate entries for group attributes.
- Recommended Response Action
- Payload for attributes cannot contain more than one instance of the same attribute.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1348
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Group hierarchy restriction is not satisfied.
- Detailed Description
- The group cannot be created because the group tag hierarchy restrictions are not met.
- Recommended Response Action
- Ensure that the group hierarchy restriction in place is satisfied before adding a group in an existing hierarchy.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1349
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Group attributes successfully updated.
- Detailed Description
- Group attributes successfully updated.
- Recommended Response Action
- No response required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1350
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Group tag name arg1 is not associated with owner id of arg2.
- Arguments
- arg1 = name
- arg2 = id
- Detailed Description
- A group tag name or id was specified in the payload that was not associated with the owner id specified.
- Recommended Response Action
- Ensure that the tag name specified in the payload exists and it is associated with the owner id attempting to create the group.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1351
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Retrieval of group with id arg1 failed.
- Arguments
- arg1 = group Id
- Detailed Description
- Retrieval of the group with the given group ID failed with an internal error.
- Recommended Response Action
- Look at the appliance logs to determine the cause of the failure.
- Category
- Configuration (CGRP = Groups)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1352
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The owner id (arg1) specified for the group is invalid.
- Arguments
- arg1 = id
- Detailed Description
- The owner id specified in the payload does not match the owner id of the group this operation affects.
- Recommended Response Action
- The owner id in the payload must match the owner id of the group this operation affects. The specification of the id owner is optional and if not provided the owner id of the group will be used for context validation purposes.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP1353
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Required attributes cannot be removed.
- Detailed Description
- Certain attributes are required and once available they cannot be deleted.
- Recommended Response Action
- Please ensure that the attributes to be deleted are not marked as required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9000
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or modify group because the request payload cannot be null.
- Detailed Description
- Group cannot be created or modified because the payload is mandatory.
- Recommended Response Action
- Enter a valid payload and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update the group because the field arg1 must be set to 0.
- Arguments
- arg1 = fieldName
- Detailed Description
- The group cannot be created or updated because the field identified in the message is not required.
- Recommended Response Action
- Enter the value 0 for the field identified in the message and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or modify group because the value entered for arg1 exceeds the maximum allowed length of arg2 characters.
- Arguments
- arg1 = field name
- arg2 = field length
- Detailed Description
- The operation cannot be completed because any request with length greater than the defined value will be rejected.
- Recommended Response Action
- Make sure the value entered in the specified field is valid and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or modify group because the field(s) arg1 are not required for the entered payload.
- Arguments
- arg1 = field names
- Detailed Description
- The operation cannot be completed because the above mentioned fields needs to be filtered out from the given payload.
- Recommended Response Action
- Remove the unnecessary fields and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because data entered in the field arg1 is invalid.
- Arguments
- arg1 = field name
- Detailed Description
- The operation cannot be completed because invalid data is entered in the field identified in the message.
- Recommended Response Action
- Enter valid data in the field and retry the operation. For information about valid data permitted in a field, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the subgroup because an invalid relationship is found between the group arg1 and subgroup arg2.
- Arguments
- arg1 = group Id
- arg2 = subgroup Id
- Detailed Description
- The subgroup cannot be deleted because an invalid relationship is found between the group and subgroup entered.
- Recommended Response Action
- Enter the correct subgroup and group name and retry the operation. For more information, see the OpenManage Enterprise-Modular Users Guide available on the support site.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or modify group because the provided name already exists.
- Detailed Description
- The operation cannot be completed because the provided group name already exists.
- Recommended Response Action
- Enter a unique name and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or modify group because the provided name is empty.
- Detailed Description
- The operation cannot be completed because group name is a mandatory field.
- Recommended Response Action
- Enter a group name and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update the group because the group cannot be the parent of itself.
- Detailed Description
- The group cannot be created or modified because the group cannot be the parent of itself.
- Recommended Response Action
- Make sure the group ID and subgroup ID are not the same and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update group arg1 with the provided parent arg2 because a group/parent relationship already exists.
- Arguments
- arg1 = group
- arg2 = parent
- Detailed Description
- The operation cannot be completed because a group cannot have a bidirectional parent relationship with another group.
- Recommended Response Action
- Make sure the entered parent ID does not create a bidirectional relationship and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9014
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Group cannot be updated because the provided ID arg1 is invalid or does not exist.
- Arguments
- arg1 = group Id
- Detailed Description
- The operation cannot be completed because group ID is mandatory for an update request.
- Recommended Response Action
- Enter a valid group ID and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve group types because the entered group type ID does not exist.
- Detailed Description
- The operation cannot be completed because no record exists for the given group type ID.
- Recommended Response Action
- Enter a valid group type ID and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve membership type because the entered membership type ID does not exist.
- Detailed Description
- The operation cannot be completed because no record exists for the given membership type ID.
- Recommended Response Action
- Enter a valid membership type ID and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to retrieve status summary because the entered group ID does not exist.
- Detailed Description
- The operation cannot be completed because no record exists for the given group ID.
- Recommended Response Action
- Enter a valid group ID and retry the operation.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group arg1 is successfully created.
- Arguments
- arg1 = GroupName
- Detailed Description
- The group identified in the message is successfully created.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The properties of group arg1 is successfully updated.
- Arguments
- arg1 = GroupName
- Detailed Description
- The properties of group identified in the message is successfully updated.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9020
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group arg1 was successfully deleted. Entities that solely target this group will also be deleted.
- Arguments
- arg1 = GroupName
- Detailed Description
- The group identified in the message was successfully deleted.Entities that solely target this group will also be deleted.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9021
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group arg1 is successfully fetched.
- Arguments
- arg1 = GroupName
- Detailed Description
- The group identified in the message is successfully fetched.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9022
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The group arg1 is successfully cloned to create a new group: arg2.
- Arguments
- arg1 = GroupName
- arg2 = New Group
- Detailed Description
- The group is successfully cloned to create a new group identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9023
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Devices added to group arg1.
- Arguments
- arg1 = GroupName
- Detailed Description
- Devices added to existing group.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9024
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Devices removed from group arg1.
- Arguments
- arg1 = GroupName
- Detailed Description
- Devices were removed from an existing group.
- Recommended Response Action
- No response action required.
- Category
- Configuration (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9025
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Multi Chassis Management Group is restored with basic details after Firmware Update; reconfigure with required details.
- Detailed Description
- An issue is identified with Multi Chassis Management Group and is restored with basic details after Firmware Update.
- Recommended Response Action
- Manual "Multi Chassis Management Group" configuration is required by using "Edit Group" wizard from "Group Configuration" of Lead Chassis Dashboard.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9026
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Import of CSV file for creating static groups is successfully initiated.
- Detailed Description
- Import of CSV file for creating static groups is successfully initiated.
- Recommended Response Action
- No response action required.
- Category
- Audit (CGRP = Groups)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CGRP9027
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import file arg1 because the format of the file is not supported.
- Arguments
- arg1 = fileName
- Detailed Description
- Unable to import group details from file because the type or format of the the file is not supported.
- Recommended Response Action
- Retry the operation using a CSV file having prescribed format. Refer to the user guide for additional information.
- Category
- Configuration (CGRP = Groups)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\