PowerEdge Servers Error and Event Messages Reference Guide

PDF

CTEM—Templates Event Messages

CTEM1001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network arg1 is successfully deleted.
Arguments
  • arg1 = network ID
Detailed Description
The network identified in the message is deleted successfully.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network arg1 could not be deleted.
Arguments
  • arg1 = network ID
Detailed Description
The network identified in the message could not be deleted.
Recommended Response Action
Make sure the entered network ID is valid and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network(s) arg1 were successfully deleted.
Arguments
  • arg1 = network IDs
Detailed Description
The network(s) identified in the message were deleted successfully.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network(s) arg1 could not be deleted.
Arguments
  • arg1 = network IDs
Detailed Description
The network(s) identified in the message could not be deleted.
Recommended Response Action
Make sure the entered network ID(s) are valid and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network arg1 was created successfully.
Arguments
  • arg1 = network name
Detailed Description
The network identified in the message was successfully created.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network arg1 could not be created.
Arguments
  • arg1 = network name
Detailed Description
The network identified in the message could not be created.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network arg1 was updated successfully.
Arguments
  • arg1 = network ID
Detailed Description
The network identified in the message was successfully updated.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The network arg1 could not be updated.
Arguments
  • arg1 = network ID
Detailed Description
The network identified in the message could not be updated.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the network with ID arg1.
Arguments
  • arg1 = network ID
Detailed Description
The network identified in the message could not be deleted.
Recommended Response Action
Make sure the entered network ID is valid and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the network arg1.
Arguments
  • arg1 = network name
Detailed Description
The network identified in the message could not be created.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the network with ID arg1.
Arguments
  • arg1 = network ID
Detailed Description
The network identified in the message could not be updated.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the request payload is empty or missing.
Detailed Description
The network cannot be created or updated because the request payload is empty or missing.
Recommended Response Action
Enter a valid payload and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the VLAN minimum arg1 must be less than the VLAN maximum arg2.
Arguments
  • arg1 = VLAN minimum
  • arg2 = VLAN maximum
Detailed Description
The network cannot be created or updated because the VLAN minimum must be less than the VLAN maximum.
Recommended Response Action
Enter a VLAN minimum that is less than the VLAN maximum and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the network because the entered network ID arg1 is invalid.
Arguments
  • arg1 = network ID
Detailed Description
The network cannot be updated because the entered network ID is invalid.
Recommended Response Action
Enter a valid network ID and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the network because the Network ID is not required for a creation request.
Detailed Description
The network cannot be createdbecause the Network ID is not required for a creation request.
Recommended Response Action
Set the Network ID to 0 and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the network name is missing or empty.
Detailed Description
The network cannot be created or updated because the network name is missing or empty.
Recommended Response Action
Enter a network name and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the network name arg1 already exists.
Arguments
  • arg1 = network name
Detailed Description
The network cannot be created or updated because the network name identified in the message already exists.
Recommended Response Action
Enter a unique network name and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the network name arg1 exceeds the maximum limit of arg2 characters.
Arguments
  • arg1 = network name
  • arg2 = maximum length
Detailed Description
The network cannot be created or updated because the network name exceeds the maximum limit as identified in the message.
Recommended Response Action
Enter a network name less than the maximum limit identified in the message and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the network description arg1 exceeds the maximum limit of arg2 characters.
Arguments
  • arg1 = network description
  • arg2 = maximum length
Detailed Description
The network cannot be created or updated because the network description exceeds the maximum length as identified in the message.
Recommended Response Action
Enter a network description less than the maximum limit identified in the message and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1022

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the network type arg1 is invalid.
Arguments
  • arg1 = network type
Detailed Description
The network cannot be created or updated because the entered network type is invalid.
Recommended Response Action
Enter a valid network type and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1024

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the network(s) because there are no network IDs provided.
Detailed Description
The network(s) cannot be deleted because there are no network IDs provided.
Recommended Response Action
Provide a list of network IDs to be deleted and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or deploy the template because the device ID arg1 is invalid.
Arguments
  • arg1 = device ID
Detailed Description
The template cannot be created or deployed because the device ID identified in the message is invalid.
Recommended Response Action
Enter a valid device ID and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the template ID arg1 provided is invalid.
Arguments
  • arg1 = template ID
Detailed Description
The request cannot be processed because the template ID provided is invalid.
Recommended Response Action
Enter a valid template ID and retry the operation. For information about valid template IDs. Refer to the API Guide or Product Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Enter a valid profile ID and retry the operation.
Detailed Description
The request cannot be processed because the profile ID provided is not found.
Recommended Response Action
Enter a valid profile Id and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1041

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the attributes CreatedBy, CreationTime, UpdatedBy, and UpdatedTime are non-modifiable.
Detailed Description
The network cannot be created or updated because the attributes CreatedBy, CreationTime, UpdatedBy, and UpdatedTime are non-modifiable.
Recommended Response Action
Remove the attribute(s) CreatedBy, CreationTime, UpdatedBy, and UpdatedTime from the request payload and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1042

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the entered VLAN range (arg1 - arg2) is not within a valid range (arg3 - arg4 or arg5 - arg6).
Arguments
  • arg1 = arg1
  • arg2 = arg2
  • arg3 = arg3
  • arg4 = arg4
  • arg5 = arg5
  • arg6 = arg6
Detailed Description
The network cannot be created or updated because the entered VLAN range is invalid as identified in the message.
Recommended Response Action
Enter a valid VLAN range as identified in the message and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1043

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the entered VLAN minimum arg1 is not within a valid range (arg2 - arg3 or arg4 - arg5).
Arguments
  • arg1 = arg1
  • arg2 = arg2
  • arg3 = arg3
  • arg4 = arg4
  • arg5 = arg5
Detailed Description
The network cannot be created or updated because the entered VLAN minimum is invalid as identified in the message.
Recommended Response Action
Enter a valid VLAN minimum as identified in the message and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1044

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the entered VLAN range overlaps with the network(s) arg1.
Arguments
  • arg1 = network info
Detailed Description
The network cannot be created or updated because the entered VLAN range overlaps with one or more networks.
Recommended Response Action
Enter a VLAN range that does not overlap with other networks and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1045

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the network arg1 because it is associated with the following entities: arg2.
Arguments
  • arg1 = network ID
  • arg2 = entities
Detailed Description
The network cannot be deleted because it is associated with the entities identified in the message.
Recommended Response Action
Remove the network from the associated entities and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1046

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation arg1 from this Member chassis because the operation can be performed only from a Lead Chassis.
Arguments
  • arg1 = operation name
Detailed Description
The operation identified in the message cannot be performed because the operation can be performed only from a Lead Chassis.
Recommended Response Action
Retry the operation by using a Lead chassis. See OpenManage Enterprise-Modular Users Guide on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1047

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the network because the network name arg1 and Universally Unique Identifier (UUID) arg2 already exist.
Arguments
  • arg1 = network name
  • arg2 = UUID
Detailed Description
The network identified in the message cannot be created because the network name and Universally Unique Identifier (UUID) already exist.
Recommended Response Action
Enter a network name that is not already available and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1048

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the network because the VLAN range entered is higher than the recommended value arg1.
Arguments
  • arg1 = max range
Detailed Description
The network cannot be created because the VLAN range entered is higher than the recommended value identified in the message.
Recommended Response Action
Enter a valid range retry the operation. For more information about recommended valid VLAN ranges, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1049

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the VLAN input range provided (arg1 - arg2) is not within valid range (arg3 - arg4) , (arg5 - arg6) , (arg7 - arg8).
Arguments
  • arg1 = arg1
  • arg2 = arg2
  • arg3 = arg3
  • arg4 = arg4
  • arg5 = arg5
  • arg6 = arg6
  • arg7 = arg7
  • arg8 = arg8
Detailed Description
The network cannot be created or updated because the entered VLAN range is invalid as identified in the message.
Recommended Response Action
Enter a valid VLAN range as identified in the message and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1050

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network because the entered VLAN minimum arg1 is not within a valid range (arg2 - arg3) , (arg4 - arg5) , (arg6 - arg7).
Arguments
  • arg1 = arg1
  • arg2 = arg2
  • arg3 = arg3
  • arg4 = arg4
  • arg5 = arg5
  • arg6 = arg6
  • arg7 = arg7
Detailed Description
The network cannot be created or updated because the entered VLAN minimum is invalid as identified in the message.
Recommended Response Action
Enter a valid VLAN minimum as identified in the message and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1051

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
View ID arg1 is not valid with this URI because the view requires a Device ID to be specified.
Arguments
  • arg1 = viewId
Detailed Description
The specified View requires both a View ID and a Device ID; however this URI specifies only a View ID, so the selected View cannot be used with this URI.
Recommended Response Action
Use an attribute view URI that specifies both a View ID and a Device ID.
Category
Miscellaneous (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1052

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
View ID arg1 is not valid with this URI because the view does not allow a Device ID to be specified.
Arguments
  • arg1 = viewId
Detailed Description
The specified View uses only a View ID; however this URI specifies both a View ID and a Device ID, so the selected View cannot be used with this URI.
Recommended Response Action
Use an attribute view URI that specifies only a View ID (and no Device ID).
Category
Miscellaneous (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1112

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
While creating the fabric arg1, by default, the VLAN-1 is created as the VLAN.
Arguments
  • arg1 = fabric Name
Detailed Description
While creating the fabric identified in the message, by default, the VLAN-1 is created as the VLAN.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1113

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to complete the requested operation because of an issue in communicating with the lead chassis.
Detailed Description
The requested operation cannot be completed because of an issue in communicating with the lead chassis.
Recommended Response Action
Wait for 20 minutes and retry the operation. For more information, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1114

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The action arg1 arg2 is successfully requested by the user arg3.
Arguments
  • arg1 = Action Name
  • arg2 = Action Argument
  • arg3 = User Name
Detailed Description
The action is successfully requested by the user identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1115

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The action arg1 arg2 is successfully initiated.
Arguments
  • arg1 = Action Name
  • arg2 = Action Argument
Detailed Description
The action identified in the message is successfully initiated.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1116

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to modify or delete the value entered in the mandatory field arg1 because it is invalid.
Arguments
  • arg1 = fieldName
Detailed Description
The value entered in the mandatory field identified in the message cannot be deleted because it is invalid.
Recommended Response Action
Enter a valid value and retry the operation. For information about valid values, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1117

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the task to import VLAN definitions.
Detailed Description
The task cannot be created to import VLAN definitions.
Recommended Response Action
Retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1118

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import the VLAN profiles because the number of VLAN profiles entered is more than the permitted upper limit.
Detailed Description
The VLAN profiles cannot be imported because the number of VLAN profiles entered is more than the permitted upper limit.
Recommended Response Action
Reduce the number of VLAN profiles and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1119

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import the VLAN profiles because there are invalid VLAN profiles in the payload.
Detailed Description
There are invalid VLAN profiles in the payload. The payload should be validated first before being imported.
Recommended Response Action
Validate the payload using the valid API, and fix any problems reported. Then retry import VLAN profiles.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1120

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import the VLAN profiles because VLAN profiles name entered are either empty or have more than arg1 of characters.
Arguments
  • arg1 = number
Detailed Description
The VLAN profiles cannot be imported because VLAN profiles name entered are either empty or have more than <number> of characters.
Recommended Response Action
Enter VLAN profiles name that are not empty and do not exceed 256 characters.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1121

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import the VLAN profiles because the VLAN descriptions entered are more than arg1 characters.
Arguments
  • arg1 = number
Detailed Description
The VLAN profiles cannot be imported because the VLAN descriptions entered are more than number of characters identified in the message.
Recommended Response Action
Enter a description that is less than 500 characters, and retry the operations. For more information about importing VLAN profiles, see the OpenManage Enterprise-Modular documentation available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1122

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import VLAN profiles because the values of VLANMinimum or VLANMaximum entered are invalid.
Detailed Description
The VLAN profiles cannot be imported because the values of VLANMinimum or VLANMaximum entered are invalid.
Recommended Response Action
Enter a valid VLANMinimum or VLANMaximum number and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1123

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import VLAN profiles because the invalid VLAN profile types are entered.
Detailed Description
The VLAN profiles cannot be imported because the invalid VLAN profile types are entered.
Recommended Response Action
Refer to the supported VLAN types provided in API, NetworkConfigurationService, NetworkTypes, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1124

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import VLAN profiles because duplicate VLAN profile names are entered.
Detailed Description
The VLAN profiles cannot be imported because duplicate VLAN profile names are entered.
Recommended Response Action
Enter unique VLAN profile names and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1125

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import VLAN profiles because the VLANMaximum and VLANMinimum values are overlapping.
Detailed Description
The VLAN profiles cannot be imported because the VLANMaximum and VLANMinimum values are overlapping.
Recommended Response Action
Make sure that the Max and Min values do not overlap and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1126

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
arg1 VLAN profiles are successfully created.
Arguments
  • arg1 = Number
Detailed Description
The VLAN profiles are successfully created as identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM1310

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
An SSL certificate is successfully generated.
Detailed Description
An SSL certificate is successfully generated.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM4016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or deploy template because of an error in creating the associated job.
Detailed Description
The template cannot be created or deployed because there was an error creating the associated job.
Recommended Response Action
Retry the operation. If the issue persists, contact your system administrator.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM6039

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or modify the profile because there is no value entered in the mandatory field arg1.
Arguments
  • arg1 = field
Detailed Description
The profile cannot be created or modified because there is no value entered in the mandatory field identified in the message.
Recommended Response Action
Enter a value for the missing field and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the profile arg1 because it has an active task.
Arguments
  • arg1 = Name
Detailed Description
The profile cannot be updated because because it has an active task.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the profile because the profile name arg1 already exists.
Arguments
  • arg1 = profile name
Detailed Description
The profile cannot be updated because the entered profile name already exists.
Recommended Response Action
Enter a unique profile name and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to complete the operation because the profile name is not entered.
Detailed Description
The operation cannot be completed because the profile name is not entered.
Recommended Response Action
Enter a valid profile name and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the profile name arg1 to the device because the profile is already assigned to another device.
Arguments
  • arg1 = profile Name
Detailed Description
The profile name identified in the message cannot be assigned to the device because the profile is already assigned to another device.
Recommended Response Action
Unassign the profile and retry the operation. Else, select a different profile and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the profile to the entity because the profiles template type arg1 and entity type arg2 do not match.
Arguments
  • arg1 = template Type
  • arg2 = entity Type
Detailed Description
The profile identified in the message cannot be assigned to the device because the profiles template type and entity type do not match.
Recommended Response Action
Select a valid and compatible entity and template type, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Profile(s) in an unassigned state cannot be unassigned.
Detailed Description
Profile(s) in anunassigned state cannot be unassigned.
Recommended Response Action
Select profile(s) which areassigned to entity to perform unassign.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to unassign Profile(s) as there are active task(s).
Detailed Description
The specified profile cannot be unassigned because it has an active task.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The specified profile arg1 cannot be migrated because it is not assigned to any entity.
Arguments
  • arg1 = Name
Detailed Description
The specified profile cannot be migrated because it is not assigned to any entity.
Recommended Response Action
Assign the profile to an entity before the migration.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to migrate the profile arg1 because arg2.
Arguments
  • arg1 = Name
  • arg2 = Reason
Detailed Description
The profile cannot be migrated because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to set the entity as the target entity because the entity is already assigned to a profile.
Detailed Description
The identity identified in the message cannot be set as the target entity because the entity is already assigned to a profile.
Recommended Response Action
Unassign the entity, and then set the entity as the target entity.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the profile arg1 to the target entity arg2 because the entity is already assigned to a profile.
Arguments
  • arg1 = profile Name
  • arg2 = entity ID
Detailed Description
The profile identified in the message cannot be assigned as the target entity because the entity is already assigned to a profile.
Recommended Response Action
Unassign the target entity, and then set the entity as the target entity.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Profile arg1 cannot be migrated to target arg2. Source and Target must be different for Migrate.
Arguments
  • arg1 = Name
  • arg2 = DeviceId
Detailed Description
To perform migrate, the source and target must be different devices.
Recommended Response Action
Select a different target for migration.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to migrate the profile arg1 because arg2.
Arguments
  • arg1 = Name
  • arg2 = Reason
Detailed Description
The profile cannot be migrated because of the reason identified in the message.
Recommended Response Action
Review the reason and initiate necessary action and then initiate necessary corrective and preventive action. For information about migrating profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to migrate the profile to the specified entity, because the source type and entity type do not match.
Detailed Description
The profile cannot be migrated to the specified entity, because the source type and entity type do not match.
Recommended Response Action
Select the valid entity type recommended for the profile, and then retry the operation. For information about migrating profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete template arg1 because it is being used by one or more profiles that are Assigned or Deployed.
Arguments
  • arg1 = template name
Detailed Description
The template cannot be deleted because it is the source template for one or more profiles that in the Assigned state.
Recommended Response Action
Associated profiles needs to be unassigned before deleting the template.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete template arg1 because it is a sample template.
Arguments
  • arg1 = template name
Detailed Description
The template cannot be deleted because it is a sample template.
Recommended Response Action
This template cannot be deleted because it is a sample template.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to redeploy the profile arg1 because it is not assigned to any entity.
Arguments
  • arg1 = profile Name
Detailed Description
The profile identified in the message cannot be redeployed because it is not assigned to any entity.
Recommended Response Action
Make sure that the profile is assigned to an entity, and then retry the operation. For information about redeploying profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to redeploy the profile arg1 because the profile is not deployed even once.
Arguments
  • arg1 = profile Name
Detailed Description
The profile identified in the message cannot be redeployed because the profile is not deployed even once.
Recommended Response Action
Make sure that the profile is deployed, and then retry the operation. For information about redeploying profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Operation results: arg1.
Arguments
  • arg1 = text
Detailed Description
Review the reason and initiate necessary resolution.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to complete the operation because template arg1 currently has a task running on it.
Arguments
  • arg1 = Template Name
Detailed Description
The operation cannot be completed because the template identified in the message currently has a task running on it.
Recommended Response Action
Read through the reason indicated in the message and initiate necessary corrective action.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8022

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the make-compliant task because the request does not have any non-compliant devices.
Detailed Description
The make-compliant taskcannot be createdbecause the request has no non-compliant devices .
Recommended Response Action
Select the devices that are innon-compliant status and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8023

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to migrate the profile arg1 because the target entity is invalid.
Arguments
  • arg1 = Profile Name
Detailed Description
The specified profile cannot be migrated because the target entity is is invalid entity.
Recommended Response Action
Please retry the operation with the valid target entity.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8024

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to find the profile to migrate it from the slot or device arg1 to the slot or device arg2.
Arguments
  • arg1 = Source Identifier
  • arg2 = Destination Identifier
Detailed Description
Unable to find the profile to migrate it from the source slot or device to the destination slot or device.
Recommended Response Action
Select a valid profile for migration.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete Identity Pool arg1 because it is used by one or more Profiles.
Arguments
  • arg1 = PoolName
Detailed Description
The specified identity pool cannot be deleted because it is used by one or more profiles.
Recommended Response Action
Enter the ID for an Identity Pool that does not have any reserved or deployed identities and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Identity Pool for template arg1 cannot be changed because it has used identities, or is being used by one or more profiles.
Arguments
  • arg1 = TemplateName
Detailed Description
The Identity Pool for the indicated template cannot be changed because it has used identities, or is being used by one or more profiles.
Recommended Response Action
If the Identity Pool for a template needs to be changed, any profiles that are using the template must first be deleted.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8027

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to redeploy the selected profile(s) as there are no modified attributes.
Detailed Description
The profile identified in the message cannot be redeployed because there are no attributes modified.
Recommended Response Action
Make sure that there are any attributes modified for a profile,and then retry the operation. For information about redeploying profiles, see the OME/OME-M Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to migrate the profile to the specified entity, because the source type is not Server.
Detailed Description
The profile cannot be migrated to the specified entity, because the source type is incorrect.
Recommended Response Action
Select the valid entity type recommended for the profile, and then retry the operation. For information about migrating profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM8029

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to migrate the profile to the specified entity, because the target type is not Server.
Detailed Description
The profile cannot be migrated to the specified entity, because the target type is incorrect.
Recommended Response Action
Select the valid entity type recommended for the profile, and then retry the operation. For information about migrating profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The action arg1 arg2 is successfully initiated by the user arg3.
Arguments
  • arg1 = Action Name
  • arg2 = Action Argument
  • arg3 = UserName
Detailed Description
The action is successfully initiated by the user identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The action arg1 arg2 is successfully performed by the user arg3.
Arguments
  • arg1 = Action Name
  • arg2 = Action Argument
  • arg3 = UserName
Detailed Description
The action is successfully performed by the user identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to deploy the template arg1 because arg2.
Arguments
  • arg1 = Name
  • arg2 = Reason
Detailed Description
The template cannot be deployed because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9022

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to clone the template arg1 because arg2.
Arguments
  • arg1 = Name
  • arg2 = Reason
Detailed Description
The template cannot be cloned because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9023

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import the template arg1 because arg2.
Arguments
  • arg1 = Name
  • arg2 = Reason
Detailed Description
The template cannot be imported because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9024

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to export the template arg1 because arg2.
Arguments
  • arg1 = Name
  • arg2 = Reason
Detailed Description
The template cannot be exported because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to capture the template arg1 from the device arg2 because arg3.
Arguments
  • arg1 = Name
  • arg2 = Identifier
  • arg3 = Reason
Detailed Description
The template cannot be captured from the device because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to associate the profile arg1 with the slot or device arg2 because arg3.
Arguments
  • arg1 = Name
  • arg2 = Identifier
  • arg3 = Reason
Detailed Description
The profile cannot be associated with the slot or device because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9027

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to detach the profile arg1 from the slot or device arg2 because arg3.
Arguments
  • arg1 = Name
  • arg2 = Identifier
  • arg3 = Reason
Detailed Description
The profile cannot be detached from the slot or device because of the reasons identified in the message.
Recommended Response Action
Review the reason and initiate necessary resolution.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because an Identity Pool with the same name already exists.
Detailed Description
The Identity Pool cannot be created or updated because an Identity Pool with the same name already exists.
Recommended Response Action
Enter a unique Identity Pool name and retry the operation. For valid names, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9029

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because a subnet mask value must be entered for non-CIDR ranges.
Detailed Description
The Identity Pool cannot be created or updated because subnet mask values must be entered for non-CIDR ranges.
Recommended Response Action
Because this IP range is not expressed in CIDR format, enter a subnet mask value, and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9030

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the subnet mask value entered is invalid.
Detailed Description
The Identity Pool cannot be created or updated because subnet mask value entered is invalid.
Recommended Response Action
Enter a valid subnet mask value (as an IP address), and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9031

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the Gateway IP address entered is invalid.
Detailed Description
The Identity Pool cannot be created or updated because Gateway IP address entered is invalid (incorrect format or Octet value).
Recommended Response Action
Enter a valid gateway IP address and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9032

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the primary DNS IP address entered is invalid.
Detailed Description
The Identity Pool cannot be created or updated because the primary DNS IP address entered is invalid.
Recommended Response Action
Enter a valid primary DNS IP address and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9033

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the secondary DNS IP address entered is invalid.
Detailed Description
The Identity Pool cannot be created or updated because the secondary DNS IP address entered is invalid.
Recommended Response Action
Enter a valid primary DNS IP address and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9034

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the count for arg1 identities is invalid. Each configured identity type must specify a count from 10 to arg2.
Arguments
  • arg1 = protocol
  • arg2 = Identity Count
Detailed Description
The Identity Pool cannot be created or updated because the count for identities is invalid. Each configured identity type must specify a count from 10 to the number identified in the message.
Recommended Response Action
Enter a value not greater than the allowed maximum value per identity type included in the Identity Pool.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9035

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Identity Pool arg1 is successfully created.
Arguments
  • arg1 = pool Name
Detailed Description
The Identity Pool identified in the message is successfully created.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9036

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Identity Pool arg1 is successfully modified.
Arguments
  • arg1 = pool Name
Detailed Description
The Identity Pool identified in the message is successfully modified.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9037

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Identity Pool arg1 is successfully deleted.
Arguments
  • arg1 = pool Name
Detailed Description
The Identity Pool identified in the message is successfully deleted.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9038

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The list of Identity Pools is successfully exported to a file.
Detailed Description
The list of Identity Pools is successfully exported to a file.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9039

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because an invalid IP address is entered for the iSCSI initiator.
Detailed Description
The Identity Pool cannot be created or updated because an invalid IP address is entered for the iSCSI initiator.
Recommended Response Action
Enter a valid IP address and retry the operation. For valid IP addresses for iSCSI initiator, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9040

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because either CIDR is suffixed with the IP address or an invalid IP address range is entered for the iSCSI initiator IP pool.
Detailed Description
The Identity Pool cannot be created or updated because either CIDR is suffixed with the IP address or an invalid IP address range is entered for the iSCSI initiator IP pool.
Recommended Response Action
Enter a CIDR value from 16-30 (inclusive) value and retry the operation. For valid CIDR addresses for iSCSI initiator, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9041

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the CIDR in IP range entered is invalid.
Detailed Description
The Identity Pool cannot be created or updated because because the CIDR in IP range entered is invalid.
Recommended Response Action
Enter a valid IP address range in the following format and retry the operation: <ip-address>/<CIDR>. Ranges must be in the format: <ip-address-1>-<ip-address-2>.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9042

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update Identity Pool because the second IP address in range precedes the first IP address in the range.
Detailed Description
The Identity Pool cannot be created or updated because the second IP address in range precedes the first IP address in the range.
Recommended Response Action
Enter the IP address in the correct order and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9043

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the IP address range entered exceeds 64,000 addresses.
Detailed Description
The Identity Pool cannot be created or updated because because the IP address range entered exceeds 64,000 addresses.
Recommended Response Action
Enter an IP address range that does not contain more than 64,000 addresses, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9044

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iSCSI IP pool identities cannot be enabled because an IP address range must be entered.
Detailed Description
The iSCSI IP pool identities cannot be enabled because an IP address range must be entered.
Recommended Response Action
Enter an IP address range and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9045

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete Identity Pool arg1 because it contains reserved and/or deployed identities.
Arguments
  • arg1 = pool Name
Detailed Description
The specified identity pool cannot be deleted because identities are currently reserved or deployed from it.
Recommended Response Action
Enter the ID for an Identity Pool that does not have any reserved or deployed identities and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9046

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the Identity Pool ID arg1 provided is invalid.
Arguments
  • arg1 = ID
Detailed Description
The request cannot be processed because the Identity Pool ID provided is invalid.
Recommended Response Action
Enter a valid Identity Pool ID and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9047

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The range for arg1 identities cannot be changed as requested because it does not include all the identities that are currently reserved or deployed from the pool.
Arguments
  • arg1 = Identity Type
Detailed Description
Some identities of the type identified in the message are currently reserved or deployed from the pool. If the identity range is changed, it must include all currently reserved and deployed identities.
Recommended Response Action
Specify a range for the specified identity type that includes all the identities that have already been reserved or deployed and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9048

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The range for arg1 identities cannot be changed as requested because it does not include all the identities that are currently reserved or deployed from the pool.
Arguments
  • arg1 = Identity Type
Detailed Description
Some identities of the type identified in the message are currently reserved or deployed from the pool. If the identity range is changed, it must include all currently reserved and deployed identities.
Recommended Response Action
Specify a range for the specified identity type that includes all the identities that have already been reserved or deployed and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9049

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the MAC address entered for the arg1 Identities is invalid.
Arguments
  • arg1 = protocol
Detailed Description
The create or update operation cannot be completed because the MAC address entered for the Identities identified in the message is invalid.
Recommended Response Action
Enter a valid MAC address that contains 6 octets, and does not contain all 00 or ff.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9050

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the WWN address entered for the arg1 Identities is invalid.
Arguments
  • arg1 = protocol
Detailed Description
The create or update operation cannot be completed because the WWN address entered for the Identities identified in the message is invalid.
Recommended Response Action
Enter a valid WWN address that contains 8 octets, and does not contain all 00 or ff.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9051

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the when the iSCSI Initiator configuration is enabled, the IQN prefix must be non-empty and must not contain white spaces.
Detailed Description
The create or update operation cannot be completed because the when the iSCSI Initiator configuration is enabled, the IQN prefix must be no-empty and must not contain white spaces.
Recommended Response Action
Enter a non-empty IQN without white space. See the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9052

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Configuration Compliance baseline arg1 is successfully created.
Arguments
  • arg1 = name
Detailed Description
The Configuration Compliance baseline identified in the message is successfully created.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9053

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Configuration Compliance baseline arg1 is successfully updated.
Arguments
  • arg1 = name
Detailed Description
The Configuration Compliance baseline identified in the message is successfully updated.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9054

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The Configuration Compliance baseline arg1 is successfully deleted.
Arguments
  • arg1 = name
Detailed Description
The Configuration Compliance baseline identified in the message is successfully deleted.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9055

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update an Identity Pool because the address range entered for arg1 identities overlaps with another range in this or another Identity Pool.
Arguments
  • arg1 = protocol
Detailed Description
The Identity pool cannot be created or updated because the address range entered for the specified protocol identities overlaps with another range in this or another Identity Pool.
Recommended Response Action
Enter an address range that does not overlap with another range in this or another Identity Pool.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9056

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Identity Pool because the address range specified for arg1 identities does not include all the identities that have already been assigned or deployed from this Identity Pool.
Arguments
  • arg1 = Protocol
Detailed Description
The Identity Pool cannot be created or updated because the address range specified for the identities indicated in the message does not include all the identities that have already been assigned or deployed from this Identity Pool.
Recommended Response Action
Enter a range that includes all identities already assigned or deployed from this pool, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9057

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the Identity State ID arg1 provided is invalid.
Arguments
  • arg1 = ID
Detailed Description
The request cannot be processed because the Identity State ID provided is invalid.
Recommended Response Action
Enter a valid Identity State ID and retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9058

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update an Identify Pool because the address range entered for arg1 has one or more multicast addresses.
Arguments
  • arg1 = protocol
Detailed Description
The Identify Pool cannot be created or updated because the address range has one or more multicast addresses.
Recommended Response Action
Enter an address range that does not include any multicast MAC addresses, and then retry the operation. For information about valid address ranges for creating Identity Pools, see the OpenManage Enterprise-Modular Users Guide available on the support site.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9059

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update an Identify Pool because the address range entered for arg1 identities overlaps with the FCoE address range specified in this or another Identity Pool.
Arguments
  • arg1 = protocol
Detailed Description
An Identify Pool cannot be created or updated because the address range entered for identities overlaps with the FCoE address range specified in this or another Identity Pool.
Recommended Response Action
Enter an address range that does not overlap with the FCoE address range specified in this or another Identity Pool, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9060

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update an Identify Pool because the address range entered for arg1 identities overlaps with the FC WWN address range specified in this or another Identity Pool.
Arguments
  • arg1 = protocol
Detailed Description
An Identify Pool cannot be created or updated because the address range entered for identities overlaps with the FC WWN address range specified in this or another Identity Pool. Values 0x2000 and 0x2001 are prepended to FCoE MAC addresses to create WWN addresses for FC.
Recommended Response Action
Enter an address range that does not overlap with the FC WWN address range specified in this or another Identity Pool, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9061

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update an Identify Pool because the FCoE and FC address ranges overlap and generate the same FC addresses.
Detailed Description
An Identify Pool cannot be created or updated because the FCoE and FC address ranges overlap and generate the same FC addresses.
Recommended Response Action
Enter FCoE and FC address ranges that do not overlap each other, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9062

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update an Identify Pool because the FC WWNN address ranges overlap and generate the same FC addresses.
Detailed Description
An Identify Pool cannot be created or updated because the FC WWNN address ranges overlap and generate the same FC addresses.
Recommended Response Action
Enter FC WWNN and WWPN address ranges that do not overlap each other, and then retry the operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9063

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the template arg1 because it has some configuration profiles associated with it.
Arguments
  • arg1 = templateName
Detailed Description
The template identified in the message cannot be deleted because it has some configuration profiles associated with it.
Recommended Response Action
Make sure that the associated configuration profiles are deleted, and then retry the operation. For information about deleting configuration profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site. Else, press F1 on the OpenManage Enterprise-Modular Graphical User Interface (GUI) to view online help about deleting configuration profiles.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9064

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Successfully deleted the following valid configuration profiles IDs arg1. However, the following invalid configuration profiles could not be deleted arg2.
Arguments
  • arg1 = valid IDs
  • arg2 = IDs of invalid profiles
Detailed Description
Successfully deleted the valid configuration profiles as identified in the message. However, the invalid configuration profiles could not be deleted.
Recommended Response Action
Make sure that the profiles are valid and profiles are in an Unassigned state, and then retry the operation. For information about deleting configuration profiles, see the OpenManage Enterprise-Modular Users Guide available on the support site. Else, press F1 on the OpenManage Enterprise-Modular Graphical User Interface (GUI) to view online help about deleting configuration profiles.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9065

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The action arg1 arg2 is successfully initiated by the user arg3. Cannot delete some of the profiles with ID arg4 as they are invalid or not eligible for delete action.
Arguments
  • arg1 = Action Name
  • arg2 = Action Argument
  • arg3 = UserName
  • arg4 = Profile Ids
Detailed Description
The action is successfully initiated by the user identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9066

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The action arg1 arg2 is successfully initiated by the user arg3. Cannot delete some of the templates with ID arg4 as they are invalid or not eligible for delete action.
Arguments
  • arg1 = Action Name
  • arg2 = Action Argument
  • arg3 = UserName
  • arg4 = Template Ids
Detailed Description
The action is successfully initiated by the user identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9067

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Successfully deleted template(s) with ID arg1. Could not delete invalid or ineligible template(s) with ID arg2.
Arguments
  • arg1 = Valid Template Ids
  • arg2 = Invalid Template Ids
Detailed Description
Templates must have a valid ID, must not have a profile created, and must not be a builtin template to be eligible to be deleted.
Recommended Response Action
Recommended action: Ensure template ID is valid, the template has no profiles created, and is not a builtin template.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9068

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not delete invalid or ineligible profile(s) with ID arg1.
Arguments
  • arg1 = Invalid Profile Ids
Detailed Description
Profiles must have a valid ID or must be in an unassigned state to be eligible to be deleted.
Recommended Response Action
Recommended action: Ensure profile ID is valid or profile state is in the unassigned state.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9069

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not delete invalid or ineligible templates with ID arg1.
Arguments
  • arg1 = Invalid Template Ids
Detailed Description
Templates must have a valid ID or no profiles associated to be eligible to be deleted.
Recommended Response Action
Recommended action: Ensure template ID is valid, is not a built-in template or has no profiles associated with it.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9070

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because an error occurred: arg1.
Arguments
  • arg1 = ErrorMessage
Detailed Description
The operation couldnt be completed because of the reasons identified in the message.
Recommended Response Action
Read through the reason indicated in the message and initiate necessary corrective action.
Category
Configuration (CTEM = Templates)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9071

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Components to clone are not supported.
Detailed Description
The operation couldnt be completed because components to clone are not supported.
Recommended Response Action
Recommended action: Ensure components to clone are valid.
Category
Configuration (CTEM = Templates)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9072

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import template because the XML file content is empty.
Detailed Description
Unable to import template because the XML file content is empty.
Recommended Response Action
Recommended Action: Ensure the XML content is not empty.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9073

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to import template because the XML content is invalid.
Detailed Description
Unable to import template because the XML file content is invalid.
Recommended Response Action
Recommended Action: Ensure the XML content is valid.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9074

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform refresh template operation. Templates created from a reference device cannot be refreshed by importing XML or from another reference device.
Detailed Description
Templates created from a reference device cannot be refreshed by importing XML or from another reference device.
Recommended Response Action
Only the templates created by importing XML can be refreshed from a reference device. Templates that are created from a reference device cannot be refreshed from another reference device or by importing XML.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9075

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform refresh template operation. FQDD components between the templates do not match. arg1.
Arguments
  • arg1 = component_info
Detailed Description
A template cannot be refreshed when the FQDD components between the existing and the refreshed templates do not match.
Recommended Response Action
Please ensure that the FQDD components between the templates match.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9076

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform the refresh template operation. Identity attributes between the templates do not match. arg1.
Arguments
  • arg1 = attributes_info
Detailed Description
A template cannot be refreshed when the identity attributes between the current and refreshed templates do not match.
Recommended Response Action
Please ensure that the attributes between the templates match. The identity attributes on the current template must match the refreshed template.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9081

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform the refresh template operation because of an internal error.
Detailed Description
A template cannot be refreshed when some unanticipated error occurs during the refresh template operation.
Recommended Response Action
A template cannot be updated when some unanticipated error occurs during the update operation. Please retry the update template operation.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9082

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform the refresh template operation because the built-in template cannot be modified.
Detailed Description
A template cannot be refreshed if it is a built-in template.
Recommended Response Action
A template cannot be refreshed if it is a built-in template. Please select a template that is not built-in.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9083

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform the refresh template operation because the template status is not in the completed state.
Detailed Description
A template cannot be refreshed if the template status is not in the completed state.
Recommended Response Action
A template cannot be refreshed if the template status is not in the completed state. Please make sure that the template is not currently in a running or failed state.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9084

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform refresh template operation because the template type does not match between the templates. The existing template is of arg1 but the reference device is of arg2.
Arguments
  • arg1 = type1
  • arg2 = type2
Detailed Description
A template cannot be refreshed when the template type is incompatible between the templates.
Recommended Response Action
A template cannot be refreshed when the template type is incompatible between the templates. Please make sure the template type of the reference device is compatible with the existing template type.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9085

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Could not perform create template operation because the template type id does not match with the device type.
Detailed Description
A template cannot be created when the template type id does not match the device type of the referenced device.
Recommended Response Action
Please ensure the template type id matches to device type of the referenced device.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9086

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
A Certificate Signing Request (CSR) is successfully generated.
Detailed Description
A Certificate Signing Request (CSR) is successfully generated.
Recommended Response Action
No response action required.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9098

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the template is in running state.
Detailed Description
The request cannot be processed because the template is in running state.
Recommended Response Action
Pleasemake sure that the template is currently not in running state.
Category
Configuration (CTEM = Templates)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

CTEM9999

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to change the change date and time because the date-time range provided is invalid.
Detailed Description
The date and time cannot be changed because the date-time range provided is invalid.
Recommended Response Action
Enter a range between 01/01/1970 00:00:00 and 01/19/2038 00:00:00.
Category
Configuration (CTEM = Templates)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\