PowerEdge Servers Error and Event Messages Reference Guide
CTL—Storage Controller Event Messages
CTL1
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Controller event log: arg1
- Arguments
- arg1 = message
- Detailed Description
- This event is retrieved from the controller when iDRAC storage monitoring was not running. Such events which are generated in the past are logged as informational severity.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL10
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 alarm has been tested.
- Arguments
- arg1 = Controller name
- Detailed Description
- The controller alarm test has run successfully. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2156
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL100
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Patrol Read operation was stopped and did not complete for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The Patrol Read operation running on the controller was stopped by user request or an issue was detected by the controller.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL101
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 is disabled.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message is disabled by a user action.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL102
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 is enabled.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message is enabled by a user action.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL103
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Check Consistency Mode value of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = attribute value
- Detailed Description
- The Check Consistency Mode value of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL104
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Enhanced Auto Import Foreign Config value of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = attribute value
- Detailed Description
- The Enhanced Auto Import Foreign Config status of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL105
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Patrol Read attribute arg1 is set to arg2 for arg3.
- Arguments
- arg1 = attribute name
- arg2 = attribute value
- arg3 = controller name
- Detailed Description
- The Patrol Read attribute identified in the message is set to the value identified in the message for the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL106
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Background Initialization Rate of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = initialization rate value
- Detailed Description
- The Background Initialization Rate of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL107
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Rebuild Rate of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = rebuild rate value
- Detailed Description
- The Rebuild Rate of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL108
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Check Consistency Rate of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = rate value
- Detailed Description
- The Check Consistency Rate of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL109
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Reconstruct Rate of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = reconstruct rate value
- Detailed Description
- The Reconstruct Rate of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL11
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Configuration on arg1 was reset.
- Arguments
- arg1 = controller name
- Detailed Description
- A user operation to reset the controller configuration was performed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2157
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL110
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Patrol Read Rate of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = patrol read rate
- Detailed Description
- The Patrol ReadRate of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL111
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The CopyBack Mode of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = copyback mode
- Detailed Description
- The CopyBack Mode the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL112
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Loadbalance Mode of arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = loadbalance mode
- Detailed Description
- The Loadbalance Mode of the controller identified in the message is set to the value identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL113
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The controller arg1 is operating in Degraded Fault Tolerant Mode because of a mismatch between the encryption key setting of the controller and its peer controller.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message is operating in Degraded Fault Tolerant Mode because of a mismatch between the encryption key setting of controller and its peer controller.
- Recommended Response Action
- Make sure that the encryption key for the peer controllers matches by using controller security operations such as creating a security key, modifying a security key, deleting a security key, and then power-cycle the chassis. Make sure to use same encryption key identifier on two controllers joining cluster.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- LCD Message
- Encryption Key Mismatch
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, LCD, OS Log
CTL114
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The encryption key of arg1 matches with its peer controller.
- Arguments
- arg1 = controller name
- Detailed Description
- The encryption key for the controller identified in the message matches with its peer.
- Recommended Response Action
- No response action required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- LCD Message
- ENcryption key Matches
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, LCD, OS Log
CTL115
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform Secure Drive related operations because a key mismatch was detected between peer controllers.
- Detailed Description
- The Secure Drive related operations cannot be performed because a key mismatch was detected between peer controllers.
- Recommended Response Action
- Make sure that the encryption key for the peer controllers matches by using controller security operations such as creating a security key, modifying a security key, deleting a security key, and then retry the operation.
- Category
- Configuration (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL116
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to unlock secure foreign locked drives because already unlocked drives are detected that are neither imported nor deleted.
- Detailed Description
- The secure foreign locked drives cannot be unlocked because already unlocked drives are detected which have secure locked configuration that are neither imported nor erased.
- Recommended Response Action
- The unlock command should be followed by an import config command to import a secure foreign locked configuration or by a cryptographic erase command. If the unlocked drives are not imported or erased, then further unlock operations on locked drives will be blocked. To import already unlocked drives on a controller, run the RACADM command at the command line interface (CLI): "racadm raid importconfig:<Controller FQDD>" where <Controller FQDD> is the FQDD identifier of the target controller. In order to erase the data on the unlocked drive, run the command: "racadm raid cryptographicerase:<Drive FQDD>" where <Drive FQDD> is the FQDD identifier of the target drive.
- Category
- Configuration (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL117
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to complete the operation because an invalid passphrase is passed for the controller arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The operation cannot be completed because an invalid passphrase is passed for the controller identified in the message.
- Recommended Response Action
- Enter a valid passphrase and retry the operation.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL118
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because the downloaded firmware image file is corrupted.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The RAID controller firmware version identified in the message cannot be updated because the downloaded firmware image file is corrupted.
- Recommended Response Action
- Download the correct firmware image file and retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL119
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because of an error in erasing the previous RAID controller firmware version (Flash Erase Error).
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because of an error in erasing the previous RAID controller firmware version (Flash Erase Error). The previous image file was not correctly erased.
- Recommended Response Action
- Do not reset, restart, or turn off the Chassis Management Controller (CMC). However, retry the operation by using a correct firmware image file. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL12
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- An invalid SAS configuration has been detected on arg1. Details: arg2
- Arguments
- arg1 = Controller name
- arg2 = error message
- Detailed Description
- The controller and attached enclosures are not cabled correctly.
- Recommended Response Action
- Refer to the storage hardware documentation for information on correct cabling configurations.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2182
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL120
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because of a timeout while erasing the previous RAID controller firmware version.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because of a timeout while erasing the previous RAID controller firmware version.
- Recommended Response Action
- Do not reset, restart, or turn off the Chassis Management Controller (CMC). However, retry the operation by using a correct firmware image file. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL121
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because of an issue during the update process (programming error).
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because of an issue during the update process (programming error).
- Recommended Response Action
- Do not reset, restart, or turn off the Chassis Management Controller (CMC). However, retry the operation by using a correct firmware image file. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL122
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because of an issue during the update process (programming timeout error).
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because of an issue during the update process (programming timeout error).
- Recommended Response Action
- Do not reset, restart, or turn off the Chassis Management Controller (CMC). However, retry the operation by using a correct firmware image file. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL123
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because the memory chip on which the firmware image is saved in is of an unknown type.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because the memory chip on which the firmware image is saved in is of an unknown type.
- Recommended Response Action
- Download the correct firmware image file and retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL124
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because of an issue detected in the firmware image file during the verification process.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because of an issue detected in the firmware image file during the verification process.
- Recommended Response Action
- Download the correct firmware image file and retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL125
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because the firmware image file is not supported.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because of an issue detected in the firmware image file during the verification process.
- Recommended Response Action
- Download the correct firmware image file and retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL126
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because the firmware image file is not signed and certified by an authorized source.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because the firmware image file is not signed and certified by an authorized source.
- Recommended Response Action
- Download the correct firmware image file and retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL127
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the RAID controller arg1 firmware version because the signed and certified firmware image file is not authenticated.
- Arguments
- arg1 = RAID controller
- Detailed Description
- The firmware version of the RAID controller identified in the message cannot be updated because the signed and certified firmware image file is not authenticated.
- Recommended Response Action
- Download the correct firmware image file and retry the operation. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL128
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The settings of controller arg1 matches the settings of its peer controller.
- Arguments
- arg1 = controller name
- Detailed Description
- The settings of controller identified in the message matches the settings of its peer controller.
- Recommended Response Action
- No response action required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- LCD Message
- Controller settings matches
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, LC Log*, LCD, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, LCD, OS Log
CTL129
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The boot media of the Controller arg1 is arg2.
- Arguments
- arg1 = controller name
- arg2 = VD name 1
- Detailed Description
- The boot media of the Controller is as identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL13
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 cache has been discarded.
- Arguments
- arg1 = Controller name
- Detailed Description
- The controller has flushed the cache and all data in the cache has been lost. This may occur when the system has memory or battery problems that cause the controller to distrust the cache. Although user data may have been lost, this alert does not always indicate that relevant or user data has been lost.
- Recommended Response Action
- Verify that the battery and memory are functioning properly.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2186
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL130
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Persistent Hot-Spare setting of the Controller arg1 is set to arg2.
- Arguments
- arg1 = controller name
- arg2 = Enable Setting
- Detailed Description
- The Persistent Hot-Spare setting of the Controller is set to the status as identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL131
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Key exchange process for the arg1 is successfully completed.
- Arguments
- arg1 = controller name
- Detailed Description
- The Key exchange process for the controller identified in the message is successfully completed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL132
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the security key for the arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The security key for the controller identified in the message cannot be changed.
- Recommended Response Action
- Make sure of the following and retry the operation: 1) The iDRAC is able to communicate to the Key Management Server. 2) The device for which the key is generated is online and responding.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL133
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The security key for the controller arg1 is successfully changed.
- Arguments
- arg1 = controller name
- Detailed Description
- The security key for the controller identified in the message is successfully changed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL134
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Security is enabled on the RAID controller in arg1.
- Arguments
- arg1 = SLOT
- Detailed Description
- The controller identified in the message is in the security mode.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL135
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Key exchange process for the encrypted drive(s) behind arg1 was unsuccessful.
- Arguments
- arg1 = controller name
- Detailed Description
- The Key exchange process for the controller identified in the message failed.
- Recommended Response Action
- Make sure of the following and retry the operation: 1) The iDRAC is able to communicate to the Key Management Server. 2) The device for which the key is generated is online and responding. 3) The device for which the key exchange is required is in the same Key Management Server Domain.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL136
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A key exchange is required for the arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- A key exchange is required for the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL137
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC is unable to successfully communicate with the device arg1, because of one or more of the following reasons: device is incorrectly seated, iDRAC firmware error, device is in a shutdown state or device firmware error.
- Arguments
- arg1 = deviceName
- Detailed Description
- iDRAC is unable to successfully communicate with the device identified in the message. This issue could have happened because of one or more of the following reasons: device is incorrectly seated, device firmware error, device is in a shutdown state or iDRAC firmware error.
- Recommended Response Action
- Ensure that the following are correct, and then retry the operation by running the following command at the Command Line Interface (CLI): racadm racreset. 1) The device is correctly operating in the host operating system. 2) The device and iDRAC firmware versions are latest. Also ensure that the device is properly installed and cabled. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL138
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- iDRAC has successfully restored connection with the device arg1.
- Arguments
- arg1 = device Name
- Detailed Description
- iDRAC has successfully restored connection with the device identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL139
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The storage controller arg1 is unable to communicate to the BMC because of arg2 Error. iDRAC management for this device is unavailable.
- Arguments
- arg1 = Controller Name
- arg2 = Error Type
- Detailed Description
- The storage controller is unable to communicate to the BMC because of the reason identified in the message. iDRAC management for this device is unavailable.
- Recommended Response Action
- Run the following RACADM command at the Command Line Interface (CLI) and retry the operation: racadm racreset. For more information about RACADM commands of iDRAC, see the latest version of "iDRAC with Lifecycle Controller RACADM CLI Guide" available on the support site.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL14
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Single-bit ECC error limit exceeded on the arg1 DIMM.
- Arguments
- arg1 = controller name
- Detailed Description
- The storage controller memory identified in the message is not operating correctly.
- Recommended Response Action
- If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2187
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL140
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC firmware version is not compatible with the storage controller arg1 firmware version, and therefore, the Sideband Management feature is unavailable.
- Arguments
- arg1 = StorageControllerName
- Detailed Description
- The iDRAC firmware version is not compatible with the storage controller version identified in the message, and therefore, the Sideband Management feature is unavailable.
- Recommended Response Action
- Download the latest iDRAC firmware version and upgrade. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL141
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The iDRAC firmware version is not compatible with the storage controller arg1 firmware version, and therefore, the Sideband Management feature may be impacted and will have limited functionality.
- Arguments
- arg1 = StorageControllerName
- Detailed Description
- The iDRAC firmware version is not compatible with the storage controller version identified in the message, and therefore, the Sideband Management feature may be impacted and will have limited functionality.
- Recommended Response Action
- Download the latest the iDRAC firmware version that supports this Storage Controller version, and then upgrade. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL142
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The storage controller arg1 has entered the reduced-functionality mode because of critical issues.
- Arguments
- arg1 = StorageControllerName
- Detailed Description
- The storage controller identified in the message has entered the reduced-functionality mode because of critical issues. The controller inventory and management features will have limited functionalities until the issue is resolved.
- Recommended Response Action
- See the Storage Controller log data, and then resolve the issue. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL143
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The storage controller arg1 has ended its reduced-functionality mode.
- Arguments
- arg1 = StorageControllerName
- Detailed Description
- The storage controller identified in the message has ended its reduced-functionality mode. It is operating as normal and providing full features.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL144
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The storage controller arg1 mode is unsupported by the iDRAC version currently installed.
- Arguments
- arg1 = StorageControllerName
- Detailed Description
- The mode of storage controller identified in the message is unsupported by the iDRAC version currently installed. Using the current iDRAC version for controller management purposes may result in unexpected behavior.
- Recommended Response Action
- Download the latest iDRAC firmware version and upgrade. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL145
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The installed version of OpenManage Server Administrator is not compatible with the firmware version installed on one or more current storage controllers. Inventory and management will not be supported for these storage controllers.
- Detailed Description
- The installed versionof OpenManage Server Administrator is not compatible with the firmware versioninstalled on one or more current storage controllers.Inventory and managementwill not be supported for these storage controllers.
- Recommended Response Action
- Identify and downloadthe OpenManage Server Administrator version that supports this StorageController firmware version. If the issue persists, contact your serviceprovider.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- OMSA Event ID
- 2493
- OMSA Trap ID
- 75400
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL147
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The fan initialization is complete on the controller arg1.
- Arguments
- arg1 = Controller FQDD
- Detailed Description
- The controller fan initialization completed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2495
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL148
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The fan is detected on the controller arg1.
- Arguments
- arg1 = ControllerFQDD
- Detailed Description
- The fan is detected on the controller.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2496
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL149
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The fan has stopped functioning on the controller arg1. Part number: arg2.
- Arguments
- arg1 = Controller FQDD
- arg2 = Part_Number
- Detailed Description
- The controller fan has stopped functioning. The RPM value of the fan may be less than the minimum threshold value that has resulted in a fan failure.
- Recommended Response Action
- Replace the controller if the FAN has stopped functioning.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- OMSA Event ID
- 2497
- OMSA Trap ID
- 75400
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL16
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- None of the arg1 properties are set.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2218
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL17
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 arg2 is changed to arg3.
- Arguments
- arg1 = Controller Name
- arg2 = property name
- arg3 = new value
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL18
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Load Balance and Auto Copyback on Predictive Failure has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2222
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL19
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Abort CC on Error, Copyback, and Load Balance has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2223
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL2
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 rebuild rate has changed.
- Arguments
- arg1 = Controller name
- Detailed Description
- You have changed the controller rebuild rate. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2142
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL20
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copyback and Load Balance has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2224
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL200
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The current firmware version arg1 is older than the required version arg2 for arg3.
- Arguments
- arg1 = version number
- arg2 = version number
- arg3 = controller name
- Detailed Description
- The firmware on the controller identified in the message is not a supported version.
- Recommended Response Action
- Download the supported version from the service provider and install it on the controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- OMSA Event ID
- 2131
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL201
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The current driver version arg1 (arg2) is older than the required driver version arg3 (arg4) for arg5.
- Arguments
- arg1 = major version number
- arg2 = minor version number
- arg3 = major version number
- arg4 = minor version number
- arg5 = controller name
- Detailed Description
- The controller driver for the identified controller is not a supported version.
- Recommended Response Action
- Download the supported version of the driver from the service provider and install it on the operating system.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- OMSA Event ID
- 2132
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL202
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to open the firmware and driver configuration file arg1 of arg2.
- Arguments
- arg1 = file name
- arg2 = controller name
- Detailed Description
- Storage Management is unable to determine whether the system has the minimum required versions of the RAID controller firmware and driver due to one of the following: 1) Incorrect installation directory path to the configuration file. 2) Removed or renamed configuration file.
- Recommended Response Action
- Reinstall Server Administrator Storage Management software on the operating system.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- OMSA Event ID
- 2165
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL203
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Abort Check Consistency on Error, Copyback or Auto Copyback on Predictive Failure, and Load Balance values are changed for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The status of the changed attribute values are reported for information purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2219
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL204
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copyback or Auto Copyback on Predictive Failure and Load Balance values are changed for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The status of the changed attribute values are reported for information purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2220
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL205
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Auto Copyback on Predictive Failure, Abort Check Consistency on Error, and Load Balance values are changed for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The status of the changed attribute values are reported for information purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2221
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL206
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Abort Check Consistency on Error and Auto Copyback on Predictive Failure values are changed for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The status of the changed attribute values are reported for information purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2227
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL207
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the Virtual Disk because the supported limit is exceeded on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The number of Virtual Disks selected for import has exceeded the supported limit of Virtual Disks on the controller identified in the message.
- Recommended Response Action
- Make sure that the number of Virtual Disks selected for import is within the supported limit on the controller, and retry the operation.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2372
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL208
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to authenticate the entered passphrase for the arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- Unable to authenticate the entered passphrase.
- Recommended Response Action
- Enter the correct passphrase and retry.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- OMSA Event ID
- 2392
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL209
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Enabled persistent hot spare on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The persistent hot spare feature is enabled on the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2394
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL21
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Abort CC on Error and Load Balance has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2225
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL210
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Disabled persistent hot spare on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The persistent hot spare feature is disabled on the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2395
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL211
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 property changed on arg2 through Manage Physical Disk Power option.
- Arguments
- arg1 = property name
- arg2 = controller name
- Detailed Description
- The physical disk properties displayed under "Manage Physical Disk Power" option has changed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2398
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL212
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The existing encryption key in the arg1 is deleted.
- Arguments
- arg1 = controller name
- Detailed Description
- This alert is generated when the encryption key in the controller is deleted.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2388
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL213
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Local Key Management (LKM) is enabled on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The Local Key Management (LKM) security mode is enabled on the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2407
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL214
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Local Key Management (LKM) encryption key in the arg1 has changed.
- Arguments
- arg1 = controller name
- Detailed Description
- The Local Key Management (LKM) encryption key in the controller identified in the message has changed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2411
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL215
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Redundant path disconnected on arg1.
- Arguments
- arg1 = Controller Name
- Detailed Description
- The controller identified in the message has two connectors that are connected to the same enclosure. The communication path on one connector has lost connection with the enclosure. The communication path on the other connector is reporting this loss.
- Recommended Response Action
- Make sure both the cables are securely attached to the enclosure and controller. For more information about connecting the cables to the enclosure, see the Cables Attached Correctly section in the PERC Users Guide. Also, make sure both Enclosure Management Modules (EMMs) are healthy.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- OMSA Event ID
- 2250
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL216
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Redundant path connection is restored on arg1.
- Arguments
- arg1 = Controller Name
- Detailed Description
- The communication in the redundant path on the connectors of the controller identified in the message is restored.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2253
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL217
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Redundant path view is cleared on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The redundant path view on the controller identified in the message is cleared.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2370
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL218
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Auto Configure operation is successfully completed on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The Auto Configure operation is successfully completed on the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2447
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL219
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The disk write cache policy of non-RAID physical disk drives on the arg1 is changed.
- Arguments
- arg1 = controller name
- Detailed Description
- The disk write cache policy of non-RAID physical disk drives on the controller identified in the message is changed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2450
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL22
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Load Balance has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2226
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL220
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The properties of "Manage physical disk power property" are changed.
- Detailed Description
- The properties of "Manage physical disk power property" are changed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- OMSA Event ID
- 2464
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CTL221
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to authenticate the controller hardware in slot arg1 because the controller is in failed state.
- Arguments
- arg1 = slotNum
- Detailed Description
- The controller hardware in the slot identified in the message cannot be authenticated because the controller is in failed state.
- Recommended Response Action
- If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL23
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copyback and Auto Copyback on Predictive Failure has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2228
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL24
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Abort CC on Error and Auto Copyback on Predictive Failure has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2229
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL25
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Auto Copyback on Predictive Failure has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2230
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL26
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copyback and Abort CC on Error has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2231
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL27
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 alarm is silenced.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2232
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL28
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Background Initialization (BGI) rate has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2233
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL29
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Patrol Read rate has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2234
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL3
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 alarm is enabled.
- Arguments
- arg1 = Controller name
- Detailed Description
- You have enabled the controller alarm. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2143
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL30
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Check Consistency rate has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2235
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL31
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Copyback is modified for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2236
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL32
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Abort CC on Error is modified for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- Re-issue the command.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2237
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL33
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 debug log file has been exported.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2238
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL34
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A foreign configuration was cleared on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- This is the result of a user operation.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2239
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL35
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A foreign configuration was imported on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The operation to import foreign configuration (virtual disks, host spares, and so on) completed successfully.
- Recommended Response Action
- Verify the foreign configuration was successfully imported by viewing the virtual disks and hot spares. See the hardware documentation for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2240
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL36
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Patrol Read mode has changed for arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2241
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL37
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A Patrol Read operation started for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- A patrol read operation was initiated by the controller or the user.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2242
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL38
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The Patrol Read operation completed for arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The patrol read task ended.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2243
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL39
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 reconstruct rate has changed.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2267
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL4
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 alarm is disabled.
- Arguments
- arg1 = Controller name
- Detailed Description
- You have disabled the controller alarm. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2144
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL40
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A multi-bit Error Correction Code (ECC) error is detected on the arg1. Part number: arg2.
- Arguments
- arg1 = controllerName
- arg2 = Part_Number
- Detailed Description
- An error involving multiple bits is detected during the Read or Write operation. The error correction algorithm recalculates parity data during read/write operations. If the issue involves a single bit, the algorithm will correct and maintain parity data. In case of multiple bits, the data may be lost. However, in some multi-bit error cases, if issue occurs during Read operation, the data on the drive may be retained. However the data is lost during a Write operation.
- Recommended Response Action
- Replace the controller. For information about replacing the controller, see the respective PERC Users Guide available on the support site.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2289
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL41
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Single-bit ECC error on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- An error involving a single bit has been encountered during a read or write operation. The error correction algorithm has corrected this error.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2290
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL42
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Enclosure Management Module (EMM) hot plug is not supported on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- An attempt to hot plug an Enclosure Management Module (EMM) has been detected.
- Recommended Response Action
- If the new enclosure and its device are not detected by the operating system, try restarting your system to verify the newly attached enclosure and its sub-components are detected. See the hardware documentation for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2304
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL43
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Diagnostic message arg1 from arg2
- Arguments
- arg1 = args
- arg2 = Controller name
- Detailed Description
- This alert is provided for informational purposes. The text for this alert is generated by the utility that ran the diagnostics and can vary depending on the situation.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2315
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL44
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Diagnostic message arg1 from arg2
- Arguments
- arg1 = message
- arg2 = Controller name
- Detailed Description
- A diagnostics test failed. The text for this message is generated by the tool that ran the diagnostics and can vary depending on the situation.
- Recommended Response Action
- Refer to the storage hardware documentation for more information on the diagnostic test.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2316
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL45
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Single-bit ECC error on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- The Dual In-line Memory Module (DIMM) is beginning to malfunction.
- Recommended Response Action
- Replace the Dual In-line Memory Module (DIMM) to avoid data loss or data corruption. The DIMM is a part of the controller battery pack. Refer to hardware documentation for information on replacing the DIMM.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2319
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL46
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Single-bit ECC error. The arg1 DIMM is critically degraded.
- Arguments
- arg1 = Controller name
- Detailed Description
- The Dual In-line Memory Module (DIMM) is malfunctioning. Data loss or data corruption may occur.
- Recommended Response Action
- Replace the DIMM immediately to avoid data loss or data corruption. The DIMM is a part of the controller battery pack. Refer to the storage hardware documentation for information on replacing the DIMM.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2320
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL47
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A single-bit Error Correction Code (ECC) error is detected on the arg1. Part number: arg2.
- Arguments
- arg1 = controllerName
- arg2 = Part_Number
- Detailed Description
- A component or subsystem on the controller is operating in a degraded state. The message may be an indicator of a future controller failure.
- Recommended Response Action
- The controller recovered from a correctable error. If this message is displayed multiple times, it indicates that the controller may need replacement in the future.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2321
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL48
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A foreign configuration was detected on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller has physical disks that were moved from another controller or have been removed and replaced on the current configuration. These physical disks contain virtual disks that were created on the current or other controller. See the storage hardware documentation for Import Foreign Configuration and Clear Foreign Configuration for more information. Foreign configuration is seen when a controller is replaced.
- Recommended Response Action
- Import or clear the detected foreign configuration using a configuration tool or utility.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2326
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL49
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The NVRAM has corrupted data on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- The NVRAM has corrupted data. This may occur after a power surge, a battery failure, or for other reasons. The controller is reinitializing the NVRAM.
- Recommended Response Action
- No response action is required as the controller is taking the required corrective action. However, If this message is generated often (such as during each reboot), then replace the controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2327
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL5
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Bad block replacement error on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Recommended Response Action
- See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2146
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL50
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The arg1 NVRAM has corrupt data.
- Arguments
- arg1 = Controller name
- Detailed Description
- The NVRAM has corrupt data. The controller is unable to correct the situation.
- Recommended Response Action
- Replace the controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2328
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL51
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 SAS port report: arg2
- Arguments
- arg1 = Controller name
- arg2 = message
- Detailed Description
- The controller detected an issue because of incorrectly connecting the SAS cables to the enclosure or backplane.
- Recommended Response Action
- Make sure that the SAS cables are firmly attached to the enclosure or backplane. For information about using SAS cables, see the respective PowerEdge server Installation and Service Manual available on the support site.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2329
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL52
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 SAS port report: arg2
- Arguments
- arg1 = Controller name
- arg2 = args
- Detailed Description
- This alert is provided for informational purposes. The text for this alert is generated by the controller and can vary depending on the situation.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2330
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL53
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A controller hot plug has been detected.
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2332
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL54
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 event log: arg2
- Arguments
- arg1 = Controller name
- arg2 = args
- Detailed Description
- This alert is provided for informational purposes. The text for this alert is generated by the controller and can vary depending on the situation.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2266;2334
- OMSA Trap ID
- 75100;80100;85100;90100;95100;100100;105100;110100;115100;120100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL55
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 event log: arg2
- Arguments
- arg1 = Controller name
- arg2 = args
- Detailed Description
- The text for this alert is generated by the controller and can vary depending on the situation. This text is from events in the controller event log that were generated while Storage Management was not running.
- Recommended Response Action
- If there is a problem, review the controller event log and the Server Administrator alert log for significant events or alerts that may assist in diagnosing the problem. Verify the health of the storage components. See the hardware documentation for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2335
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL56
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 event log: arg2
- Arguments
- arg1 = Controller name
- arg2 = args
- Detailed Description
- The text for this alert is generated by the controller and can vary depending on the situation. This text is from events in the controller event log that were generated while Storage Management was not running.
- Recommended Response Action
- See the hardware documentation for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2336
- OMSA Trap ID
- 75400
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL57
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The factory default settings were restored on arg1.
- Arguments
- arg1 = controller Name
- Detailed Description
- The controller was reset to factory default configuration settings.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2339
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL58
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 SAS SMP communications error arg2
- Arguments
- arg1 = Controller name
- arg2 = args
- Detailed Description
- The text for this alert is generated by the firmware and can vary depending on the situation. The reference to SMP in this text refers to SAS Management Protocol.
- Recommended Response Action
- There may be a SAS topology error. See the hardware documentation for information on correct SAS topology configurations. There may be problems with the cables such as a loose connection or an invalid cabling configuration. See the Cables Attached Correctly section for more information on checking the cables. See the hardware documentation for information on correct cabling configurations. Verify that the firmware version is supported.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2356
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL59
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 SAS expander error: arg2
- Arguments
- arg1 = Controller name
- arg2 = args
- Detailed Description
- There may be a problem with the enclosure. Verify the health of the enclosure and its components. To verify the health of the enclosure, select the enclosure object in the tree view. The Health sub-tab displays a red X or yellow exclamation point for enclosure components that are failed or degraded. See the enclosure documentation for more information.
- Recommended Response Action
- There may be a problem with the enclosure. Verify the health of the enclosure and its components. To verify the health of the enclosure, select the enclosure object in the tree view. The Health sub-tab displays a red X or yellow exclamation mark for enclosure components that are failed or degraded. See the enclosure documentation for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2357
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL6
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Bad block sense error from arg1
- Arguments
- arg1 = Controller name
- Detailed Description
- A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Recommended Response Action
- See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2147
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL60
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A user has discarded data from the arg1 cache.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2360
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL61
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Physical disks found missing from configuration during boot time on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- The controller has detected a change in the storage configuration between since its last shut down. This can generally happen if some configured physical disks are removed from the system when the system was shutdown.
- Recommended Response Action
- Shut down the system. Re-insert the removed physical disks and re-start the system.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2361
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL62
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 on arg2 has missing drives and will go offline at boot.
- Arguments
- arg1 = VD names
- arg2 = Controller name
- Detailed Description
- Physical disk(s) have been removed from a virtual disk. The virtual disk will be in Failed state during the next system reboot. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2362
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL63
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Previous configuration was found completely missing during boot time on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- The controller is unable to retrieve storage configuration saved during last shut down. This can generally happen if some configured physical disks are removed from the system when the system was shutdown.
- Recommended Response Action
- Shut down the system. Re-insert the removed physical disks and re-start the system.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2364
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL64
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import Unsupported Virtual Disk type RAIDarg1 on arg2.
- Arguments
- arg1 = args
- arg2 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2371
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL65
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import Unsupported Virtual Disk type RAIDarg1 on arg2.
- Arguments
- arg1 = args
- arg2 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL66
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import Unsupported Virtual Disk type RAIDarg1 on arg2.
- Arguments
- arg1 = args
- arg2 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2373
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL67
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import Virtual Disk with missing span on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2374
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL68
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import Virtual Disk with missing Physical Disk on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2375
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL69
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import virtual disk with outdated physical disk information on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2376
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL7
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Bad block medium error on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Recommended Response Action
- See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2148
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL70
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import an orphan drive on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2377
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL71
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Attempted to import an incompatible Physical Disk on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2378
- OMSA Trap ID
- 75100
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL72
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The foreign configuration overflow has occurred on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- There is too much foreign configuration data to be imported in one attempt.
- Recommended Response Action
- Import these foreign configurations in multiple attempts.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2379
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL73
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Foreign configuration is imported only partially. Some configurations failed to import on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2380
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL74
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Preserved cache detected on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller has preserved data in the cache from a virtual disk, which it can no longer locate. No data loss has occurred as the controller is saving these operations in its cache.
- Recommended Response Action
- Check for the existence of a foreign configuration and import if any. Check that enclosures are cabled correctly.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2258
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL75
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Preserved cache discarded on arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller cache was discarded by the user. Data may have been lost or corrupted.
- Recommended Response Action
- If data was corrupted or lost, restore the data to the disk from a backup copy.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2257
- OMSA Trap ID
- 75300
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL76
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A configuration command could not be committed to disk on arg1
- Arguments
- arg1 = Controller name
- Detailed Description
- The controller encountered errors while applying the configuration on the physical disks. The configuration command applied has not taken effect.
- Recommended Response Action
- Re-issue the failed configuration command or try with a different set of physical disks. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- OMSA Event ID
- 2401
- OMSA Trap ID
- 75400
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL77
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Flash of new firmware image(s) completed on arg1.
- Arguments
- arg1 = Controller Name
- Detailed Description
- This alert message occurs if controller firmware is flashed successfully.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- LCD Message
- Flash firmware completed.
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL78
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Firmware image arg1 is flashing on arg2.
- Arguments
- arg1 = args
- arg2 = Controller Name
- Detailed Description
- This alert message occurs if controller firmware is flashed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL79
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Controller in arg1 is not supported and will not be powered on.
- Arguments
- arg1 = controller slot
- Detailed Description
- This controller does not support features required for this chassis. This controller will not be powered on to prevent data loss.
- Recommended Response Action
- Replace the controller with a supported controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL8
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Bad block extended sense error on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Recommended Response Action
- See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2149
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL80
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 experienced the following warning during startup: arg2.
- Arguments
- arg1 = controller name
- arg2 = controller message
- Detailed Description
- The controller identified in the message has an issue as displayed in the message.
- Recommended Response Action
- To resolve this issue, see Troubleshooting section in the Dell Shared PowerEdge RAID Controller (SPERC8) documentation.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL81
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Security key assigned to arg1 is modified.
- Arguments
- arg1 = controller name
- Detailed Description
- The security key assigned to the controller identified in the message is modified.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL82
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is functioning normally.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message is functioning normally.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*
- Applicable Event or Alert Types
- CMC—Filter Visibility, LC Log*, LCD
CTL83
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Communication with arg1 has been lost.
- Arguments
- arg1 = controller name
- Detailed Description
- The management controller is not communicating with the storage controller identified in the message. This may be because of any one of the following: 1) PCIe subsystem is has stopped functioning 2) An issue in the storage controller 3) An issue in the management controller.
- Recommended Response Action
- Restart the server. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, LCD, Chassis Event Proxy*
CTL84
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is running an unsupported firmware version.
- Arguments
- arg1 = controller name
- Detailed Description
- The firmware on the controller identified in the message is not supported by this version of the CMC. This may result in degraded functionality.
- Recommended Response Action
- Update the CMC Firmware to the latest version available or revert the controller firmware to a previous version.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL85
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is operating at less than optimal bandwidth.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message experienced a PCIe training error and is operating at less than full bandwidth. Until this issue is resolved, a reduction in the storage performance is expected.
- Recommended Response Action
- Perform a Powercycle operation on the Chassis. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL86
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is operating in Fault Tolerant Mode.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller is operating in conjunction with another controller to service the same set of virtual and physical disks, providing better redundancy.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL87
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 settings do not match the settings of its peer.
- Arguments
- arg1 = controller name
- Detailed Description
- One or more settings on the controller identified in the message do not match the settings of its peer controller. This can cause issues in a fault tolerant setup.
- Recommended Response Action
- Make sure that each controller is using the same setting by reconfiguring the settings of the identified controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- LCD Message
- Controller setting mismatch
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LC Log*, LCD, Chassis Event Proxy*
CTL88
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 firmware does not match the firmware of its peer controller.
- Arguments
- arg1 = controller name
- Detailed Description
- The firmware running on the controller identified in the message does not match the firmware version of its peer controller. This can cause issues in a fault tolerant setup.
- Recommended Response Action
- Make sure each controller is using the same firmware by updating the firmware of the identified controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- LCD Message
- Controller firmware mismatch
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL89
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is no longer fault tolerant because the peer controller is not available.
- Arguments
- arg1 = controller name
- Detailed Description
- The peer controller is no longer active in this fault tolerant pair. This can be a temporary situation.
- Recommended Response Action
- Check the chassis log for issues with the peer controller. If the peer controller does not resume normal operations after 5 minutes, if the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL9
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Bad block extended medium error on arg1.
- Arguments
- arg1 = Controller name
- Detailed Description
- A portion of a physical disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Recommended Response Action
- See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- OMSA Event ID
- 2150
- OMSA Trap ID
- 75300
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL90
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is not operating in Fault Tolerant Mode because of an incompatible peer controller.
- Arguments
- arg1 = controller name
- Detailed Description
- The peer controller is not compatible with the controller identified in the message because of a hardware mismatch.
- Recommended Response Action
- Replace the peer controller with the same model controller as the controller identified in the message.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL91
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is unable to communicate with its peer.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message is unable to communicate with its peer. This can be because of a cabling issue.
- Recommended Response Action
- Check the cabling between the PERC cards and the expanders. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL92
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 is not operating in Fault Tolerant Mode because of an incompatible license setting on its peer controller.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message licensed features do not match its peer.
- Recommended Response Action
- Update the license on the peer controller.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL93
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 has been successfully changed to operate in Fault Tolerant mode.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message has been changed to operate as part of a fault tolerant pair.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL94
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 has been successfully changed to operate in single controller mode.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message has been changed to operate as a single controller and not as part of a fault tolerant pair.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL95
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 has left the fault tolerant pair.
- Arguments
- arg1 = controller name
- Detailed Description
- The controller identified in the message has stopped operating in a fault tolerant mode.
- Recommended Response Action
- This situation may resolve itself in a few minutes. If the issue persists, Collect a SupportAssist collection (TSR) report using iDRAC. Visit https://www.dell.com/support/incidents-online/contactus/dynamic to use the Virtual Assistant to analyze the collection and recommend a resolution.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Warning
- Trap/EventID
- 4330
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL96
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 has entered safe mode with limited functionality due to arg2
- Arguments
- arg1 = controller name
- arg2 = controller message
- Detailed Description
- The controller identified in the message has an issue as displayed in the message.
- Recommended Response Action
- To resolve this issue, see Troubleshooting section in the Dell Shared PowerEdge RAID Controller (SPERC8) documentation.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Critical
- Trap/EventID
- 4329
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Filter Visibility, SNMP Alert*, Email Alert*, Remote System Log*, LCD, Chassis Event Proxy*
CTL97
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- arg1 personality change requested to arg2 mode.
- Arguments
- arg1 = controller name
- arg2 = new mode
- Detailed Description
- The controller identified in the message has requested a new personality mode (HBA or RAID or Unsupported).
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- OMSA Event ID
- 2446
- OMSA Trap ID
- 75100
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL98
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Security key assigned to arg1.
- Arguments
- arg1 = controller name
- Detailed Description
- The security key provided as input has been assigned to the controller identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
CTL99
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Security key assigned to arg1 is deleted.
- Arguments
- arg1 = controller name
- Detailed Description
- The security key assigned to the controller identified in the message is deleted.
- Recommended Response Action
- No response action is required.
- Category
- Storage (CTL = Storage Controller)
- Severity
- Informational
- Trap/EventID
- 4331
- Redfish Event Type
- Alert
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, OS Log
- Applicable Event or Alert Types
- CMC—Not Applicable
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\