PowerEdge Servers Error and Event Messages Reference Guide
CUMP—Update Manager Plugin Event Messages
CUMP0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository arg1 is refreshed successfully.
- Arguments
- arg1 = repoName
- Detailed Description
- The repository identified in the message is successfully refreshed.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to refresh the repository arg1.
- Arguments
- arg1 = repoName
- Detailed Description
- Unable to refresh the repository.
- Recommended Response Action
- 1) On the OpenManage Enterprise page, click Jobs. 2) Make sure that the Refresh Repository job is run, and then retry the operation.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Repository has exceeded the configured storage limit.
- Detailed Description
- The repository cannot be either created or updated because of insufficient storage space.
- Recommended Response Action
- Delete the unused repositories or increase the storage limit by doing the following and retry the operation: 1) On the Update Management Plugin page, click Settings. 2) Enter the revised Set Storage Limit value.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the repository arg1.
- Arguments
- arg1 = repoName
- Detailed Description
- Unable to create the repository.
- Recommended Response Action
- 1) On the OpenManage Enterprise page, click Jobs. 2) Make sure that the Create Repository job is run, and then retry the operation.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the repository arg1.
- Arguments
- arg1 = repoName
- Detailed Description
- Unable to delete the repository.
- Recommended Response Action
- 1) On the OpenManage Enterprise page, click Jobs. 2) Make sure that the Delete Repository job is run, and then retry the operation.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the repository arg1.
- Arguments
- arg1 = repoName
- Detailed Description
- Unable to update the repository.
- Recommended Response Action
- 1) On the OpenManage Enterprise page, click Jobs. 2) Make sure that the Update Repository job is run, and then retry the operation.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to download the repository files.
- Detailed Description
- Unable to download the repository files because the proxy server is not configured or accessible, or the provided source location is not accessible.
- Recommended Response Action
- Check the proxy configuration and source location, and then retry the operation. For more information about how to check the proxy configuration, see the OpenManage Enterprise Users Guide available on the support site.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import the update package into the repository arg1.
- Arguments
- arg1 = repoName
- Detailed Description
- Unable to import the update package into the repository.
- Recommended Response Action
- Go to the jobs page and check the details of the import job, and then retry the operation.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Sign verification failed for the import package.
- Detailed Description
- Unable to import the update package because the CSR signature is not verified.
- Recommended Response Action
- Import the latest signed update package.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to import package as sign verification for package failed.
- Detailed Description
- Unable to import the update package because the Sign Verification operation of the update package coud not be completed.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository arg1 is created successfully.
- Arguments
- arg1 = repoName
- Detailed Description
- The repository identified in the message is successfully created.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository arg1 is updated successfully.
- Arguments
- arg1 = repoName
- Detailed Description
- The repository identified in the message is successfully updated.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository arg1 is deleted successfully.
- Arguments
- arg1 = repoName
- Detailed Description
- The repository identified in the message is successfully deleted.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0014
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The configuration data is successfully updated.
- Detailed Description
- The configuration data is successfully updated.
- Recommended Response Action
- No response actionis required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- An update package is available for the selected catalog.
- Detailed Description
- An update package is available for the selected catalog.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- An update package is unavailable for the selected catalog.
- Detailed Description
- An update package is unavailable for the selected catalog.
- Recommended Response Action
- No response action is required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The catalog arg1 is updated successfully.
- Arguments
- arg1 = catalogName
- Detailed Description
- The catalog identified in the message is successfully updated.
- Recommended Response Action
- No response action required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the catalog arg1.
- Arguments
- arg1 = catalogName
- Detailed Description
- Unable to update the catalog.
- Recommended Response Action
- 1) On the OpenManage Enterprise page, click Jobs. 2) Make sure that the Update Catalog job is run, and then retry the operation.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The storage space has reached or exceeded 80% of the configured value.
- Detailed Description
- The storage space has reached or exceeded 80% of the configured value.
- Recommended Response Action
- If necessary, delete the unused repositories to free up storage space.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0020
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create the repository version because the maximum number of versions are already created.
- Detailed Description
- The repository version cannot be created because the maximum number of versions are already created.
- Recommended Response Action
- Make sure that the maximum number of repository versions does not exceed the threshold value, and then retry the operation. To delete an existing repository version, do the following: 1) Go to the repository where the version must be created. 2) Select one or more versions that you want to delete. 3) Click Delete.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0021
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository version arg1 of repository arg2 is deleted successfully.
- Arguments
- arg1 = versionNumber
- arg2 = repoName
- Detailed Description
- The version of repository identified in the message is deleted successfully.
- Recommended Response Action
- No response action required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0022
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository Bundle(s) or Component(s) of repository arg1 is deleted successfully.
- Arguments
- arg1 = repoName
- Detailed Description
- The Bundle(s) or Component(s) of repository identified in the message is deleted successfully.
- Recommended Response Action
- No response action required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0023
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository version arg1 of repository arg2 is created successfully after performing the arg3 operation.
- Arguments
- arg1 = versionNumber
- arg2 = repoName
- arg3 = taskName
- Detailed Description
- The version of repository identified in the message is created successfully.
- Recommended Response Action
- No response action required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
CUMP0024
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The repository arg1 is edited successfully.
- Arguments
- arg1 = repoName
- Detailed Description
- The repository identified in the message is successfully edited.
- Recommended Response Action
- No response action required.
- Category
- Updates (CUMP = Update Manager Plugin)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\