PowerEdge Servers Error and Event Messages Reference Guide

PDF

NNPA—Network Partition Event Messages

NNPA0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or enable the server profile because the user is not allowed to configure both SharedLOM native VLAN and SharedLOM tagged VLAN Networks attributes.
Detailed Description
This error is returned if the Server profile is configured both SharedLOM native VLAN and SharedLOM tagged VLAN Networks attributes.
Recommended Response Action
Enter either SharedLOM native VLAN or SharedLOM tagged VLAN Networks configurations for Server profile partition.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or deploy the server interface profile because native VLAN or tagged VLAN configuration is not allowed on the parent port if nPar partitioning is enabled.
Detailed Description
The server interface profile cannot be created or deployed because either native VLAN or tagged VLAN configs are present in the payload for the parent interface when nPar partitioning is enabled.
Recommended Response Action
Make sure to remove the native VLAN or tagged VLAN Configurations in the payload for the parent interface, if nPar partitioning is enabled, then retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or enable the server profile because the more than one nPar-parent-tagged network cannot be configured at a time.
Detailed Description
The server profile cannot be created or enabled because the more than one nPar-parent-tagged network cannot be configured at a time.
Recommended Response Action
Retry the operation by configuring only one nPar-parent-tagged network in the server profile.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or deploy the server profile or server interface profile because the network type (FCoE) of native VLAN or tagged VLAN network is not supported for Network Partitions (NPAR).
Detailed Description
The server profile or server interface profile cannot be created or deployed because the network type (FCoE) of native VLAN or tagged VLAN network is not supported for Network Partitions (NPAR).
Recommended Response Action
Make sure to configure the native VLAN or tagged network with supported network type and then retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the partition interface because the properties of native VLAN and tagged VLAN of the partition interface are the same.
Detailed Description
The partition cannot be created because the properties of native VLAN and tagged VLAN of the partition interface are the same.
Recommended Response Action
Enter a valid and unique ID for native and tagged VLANs and retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or deploy the server interface profile because untagged VLAN configuration is not allowed on the parent interface if nPar partition is enabled.
Detailed Description
The server interface profile cannot be created or deployed because an untagged VLAN config is present in the payload for the parent interface when nPar partitioning is enabled.
Recommended Response Action
Make sure to remove the untagged VLAN config in the payload for the parent interface if nPar partitioning is enabled, then retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the invalid tagged VLAN network ID in the server profile and server interface profile because the network partition is enabled.
Detailed Description
The Invalid tagged VLAN network ID cannot be configured in the server profile and server interface profile because the network partition is enabled.
Recommended Response Action
Configure valid tagged VLAN network ID in the server profile and server interface profile.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the server interface profile because the Network Partition (NPAR) count in the existing server interface profile is not same as the NPAR count in the new server interface profile.
Detailed Description
The server interface profile cannot be updated because the Network Partition (NPAR) count in the existing server interface profile is not same as the NPAR count in the new server interface profile.
Recommended Response Action
In the PUT query payload request, enter Network Partition (NPAR) IDs same as the existing server interface profile, and then retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the server interface profile along with partitions because the partition ID sequence is invalid.
Detailed Description
The server interface profile along with partitions cannot be created or updated because the partition ID sequence is invalid.
Recommended Response Action
Enter a valid partition ID sequence and retry the operation. The partition ID must start with 1 as the first number.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure Maximum Transmission Unit (MTU) on the interface arg1 because the interface is of the Network Partitions (NPAR) type.
Arguments
  • arg1 = Interface Name
Detailed Description
The Maximum Transmission Unit (MTU) cannot be configured on the specified interface because it is of the Network Partitions (NPAR) type.
Recommended Response Action
Select a different interface type and retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NNPA0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the Breakout property on the port-group or interface arg1 because either the child interface of the port-group or the interface is partitioned.
Arguments
  • arg1 = Interface Name
Detailed Description
The breakout property on the port-group or interface identified on the message cannot be configured because either the child interface of port-group or the interface is partitioned.
Recommended Response Action
Remove the partition configurations and retry the operation.
Category
Configuration (NNPA = Network Partition)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\