PowerEdge Servers Error and Event Messages Reference Guide

PDF

NSER—Server Event Messages

NSER0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 is detected.
Arguments
  • arg1 = Server ID
Detailed Description
The server identified in the message is detected.
Recommended Response Action
No response action is required.
Category
Audit (NSER = Server)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 is not detected.
Arguments
  • arg1 = Server ID
Detailed Description
The server identified in the message is not detected. Possible reasons could be that the fabric node to which the server is connected is operationally down or the server is moved or replaced from the existing slot.
Recommended Response Action
Make sure that the server is physically present and operational. Also ensure that the fabric node that is connected to the server is operational.
Category
Audit (NSER = Server)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 is onboarded.
Arguments
  • arg1 = server ID
Detailed Description
The configuration of server identified in the message is validated and onboarded.
Recommended Response Action
No response action is required.
Category
Audit (NSER = Server)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 is offboarded.
Arguments
  • arg1 = Server Id
Detailed Description
The detected server and its configuration is no longer validated.
Recommended Response Action
Make sure that the server is physically present and operational.
Category
Audit (NSER = Server)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 with Server Interface arg2 is onboarded.
Arguments
  • arg1 = server ID
  • arg2 = server interface ID
Detailed Description
The configuration of server identified in the message is validated and successfully onboarded.
Recommended Response Action
No response action is required.
Category
Audit (NSER = Server)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Server arg1 ServerInterface arg2 is offboarded.
Arguments
  • arg1 = Server Id
  • arg2 = Server Interface Id
Detailed Description
The detected server interface and its configuration is not validated.
Recommended Response Action
Make sure that the server interface is physically present and operational.
Category
Audit (NSER = Server)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 having the OnboardInterface arg2and Server Interfaces: arg3, are bonded.
Arguments
  • arg1 = server ID
  • arg2 = Onboard Interface ID
  • arg3 = server interface IDs
Detailed Description
The server and server interfaces identified in the message are bonded.
Recommended Response Action
No response action is required.
Category
Audit (NSER = Server)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NSER0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The server arg1 having the OnboardInterface arg2 is unbonded.
Arguments
  • arg1 = server ID
  • arg2 = OnboardInterface ID
Detailed Description
The server and server interfaces identified in the message are unbonded.
Recommended Response Action
Make sure the server interfaces configuration are correct.
Category
Audit (NSER = Server)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\