PowerEdge Servers Error and Event Messages Reference Guide
NVCO—Common Event Messages
NVCO0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to service the request because of an internal system error.
- Detailed Description
- The request failed due to internal system error.
- Recommended Response Action
- Retry the operation after some time. If the issue persists, contact the administrator.
- Category
- Configuration (NVCO = Common)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVCO0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the name because the configured name exceeds the limit of 256 characters in size.
- Detailed Description
- The name cannot be configured because the configured name exceeds 256 characters in size.
- Recommended Response Action
- Enter a name within the range of 256 characters and retry the operation.
- Category
- Configuration (NVCO = Common)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVCO0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the description because the configured description exceeds the limit of 256 characters in size.
- Detailed Description
- The description cannot be configured because the configured description exceeds 256characters in size.
- Recommended Response Action
- Enter a description within the range of 256characters and retry the operation.
- Category
- Configuration (NVCO = Common)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVCO0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the port properties in the Fabric mode because data entered in the Description field is more than 240 characters.
- Detailed Description
- The port properties in theFabric mode cannot be configured because data entered in the Description fieldis more than 240 characters.
- Recommended Response Action
- Make sure that the portdescription is equal to or less than 240 characters and retry the operation.
- Category
- Configuration (NVCO = Common)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\