PowerEdge Servers Error and Event Messages Reference Guide
NVFH—Network Validation Fabric Health Event Messages
NVFH0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The current leader node is not preferred and a node arg1 with preferred leader configuration is discovered.
- Arguments
- arg1 = nodeName
- Detailed Description
- The current leader is not configured as the preferred leader.
- Recommended Response Action
- Check cluster members. It is suggested to keep the current node as leader. Else, switch-over to new preferred leader.
- Category
- Configuration (NVFH = Network Validation Fabric Health)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVFH0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A node arg1 of more preferred platform type arg2 than the current leader is discovered.
- Arguments
- arg1 = nodeName
- arg2 = platformType
- Detailed Description
- A node of more preferred platform type is discovered.
- Recommended Response Action
- It is suggested to configure the preferred leader with the preferred platform type.
- Category
- Configuration (NVFH = Network Validation Fabric Health)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVFH0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- A node of more preferred platform type arg1 than the current leader is discovered and preferred leader is not configured on it.
- Arguments
- arg1 = platform Type
- Detailed Description
- A node of more preferred platform type is discovered but the preferred leader is not configured on it.
- Recommended Response Action
- It is suggested to configure the preferred leader if required.
- Category
- Configuration (NVFH = Network Validation Fabric Health)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVFH0017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The backup node does not have information about the leader node.
- Detailed Description
- The backup node does not have information about the leader node.
- Recommended Response Action
- To view information about the leader node, run the following command at the CLI: show smartfabric cluster.
- Category
- Configuration (NVFH = Network Validation Fabric Health)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
NVFH0029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- The REST_USER Password must be immediately updated.
- Detailed Description
- The REST_USER Password must be immediately updated.
- Recommended Response Action
- Ensure that the password has at least nine characters, at least one upper case letter (A-Z), at least one lower case letter (a-z), at least one numeric character (0-9) and at least one special character (!,@, #, $, %, ^, &, or *), and then retry the operation.
- Category
- Configuration (NVFH = Network Validation Fabric Health)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\