PowerEdge Servers Error and Event Messages Reference Guide

PDF

NVNE—Network Event Messages

NVNE0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the network ID is not entered in the request.
Detailed Description
The request cannot be processed because the network ID is not entered in the request.
Recommended Response Action
Enter a valid network ID and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the network because the network already exists.
Detailed Description
The network identified in the message cannot be created because the network already exists.
Recommended Response Action
Enter a different network name and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to retrieve network because the network does not exist.
Detailed Description
The network cannot be retrieved because the network identified in the message does not exist.
Recommended Response Action
Enter a valid network name and retry the operation again.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure VLAN because the VLAN minimum and/or VLAN maximum values configured on the Network are not valid.
Detailed Description
The network cannot be created because the VLAN minimum and/or VLAN maximum values configured on the Network are not valid.
Recommended Response Action
Enter a valid VLAN minimum and VLAN maximum value and retry the operation again.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure a network because the VLAN range configured is overlapping with an already defined network.
Detailed Description
The network cannot be created because the VLAN range configured is overlapping with an already defined network.
Recommended Response Action
Enter another set of VLAN maximum and VLAN minimum values and retry the operation again.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network properties because a valid network type is not entered in the request.
Detailed Description
The network properties cannot be created or updated because a valid network type is not entered in the request.
Recommended Response Action
Enter a valid network type and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the network because editing the network type is not permitted on the current network.
Detailed Description
The network properties cannot be updated because editing the network type is not permitted on the current network.
Recommended Response Action
Delete the current network and create a new network by using the necessary network type.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the network profile because the VLAN range is limited to arg1 in one network profile.
Arguments
  • arg1 = VLAN Number
Detailed Description
The network cannot be created or updated because the user can only configure VLANs up to a maximum number identified int he message in one network profile.
Recommended Response Action
Enter a valid VLAN range within the maximum range identified in the message and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because of a mismatched network type configured on the server interface.
Detailed Description
The network profile cannot be created or updated because of a mismatched network type configured on the server interface.
Recommended Response Action
Remove the conflicting network configuration on the server interface, and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because the VLAN configuration is not allowed on the L3 Routed (Layer3) type of networks.
Detailed Description
The network profile cannot be created or updated because the VLAN configuration is not allowed on L3 Routed (Layer3) type of networks.
Recommended Response Action
Remove the VLAN configuration and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because the Layer3 Routed network is configured as tagged network on the server interface.
Detailed Description
The network profile cannot be created or updated because the Layer3 Routed network is configured as a tagged network on the server interface.
Recommended Response Action
Remove the Layer3 Routed type of network from the tagged network list on the server interface and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the network profile because the updating the virtual network attributes is not permitted.
Detailed Description
The network profile cannot be updated because the updating the virtual network attributes is not permitted.
Recommended Response Action
If the virtual network in a network profile requires an update then delete and recreate the network profile.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update a network profile because the Ipv6 is configured on the network profile.
Detailed Description
The network profile cannot be created or updated because the Ipv6 is configured on the network profile.
Recommended Response Action
Remove the Ipv6 configuration on the network profile and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because VLAN ID is same as the Virtual Network VLT VLAN ID.
Detailed Description
The network profile cannot be updated because VLAN ID is same as the Virtual Network VLT VLAN ID.
Recommended Response Action
Select a different VLAN ID for the network profile and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because the virtual network name is not entered.
Detailed Description
The network profile cannot be created or updated because the virtual network name is not entered.
Recommended Response Action
Enter a valid virtual network profile name and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the network profile because this is a Management or Control Network profile.
Detailed Description
The network profile cannot be deleted because this is a Management or Control Network profile.
Recommended Response Action
Make sure that the network profile is not of Management or Control Network profile and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because a reserved VLAN ID (4000-4094) is configured for the network.
Detailed Description
The network profile cannot be created or updated because a reserved VLAN ID (4000-4094) is configured for the network.
Recommended Response Action
Enter a valid VLAN ID and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile arg1 because IP addresses are not configured.
Arguments
  • arg1 = network ID
Detailed Description
The network profile mentioned in the message cannot be created or updated because IP addresses are not configured.
Recommended Response Action
Create or update the network profile with valid IP addresses and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE0020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to either create or update the network profile because a reserved VLAN ID (4004, 4020) is configured for the network.
Detailed Description
The network profile cannot be either created or updated because a reserved VLAN ID (4004, 4020) is configured for the network.
Recommended Response Action
Enter a valid VLAN ID(except 4004 and 4020) and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to retrieve the virtual network data because the virtual network does not exist.
Detailed Description
The virtual network data cannot be retrieved because the virtual network does not exist.
Recommended Response Action
Enter a valid virtual network name and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network profile because an invalid Virtual Extensible LAN (VXLAN) Virtual Network Id(VNI) is configured.
Detailed Description
The virtual network profile cannot be created or updated because an invalid Virtual Extensible LAN (VXLAN) Virtual Network Id(VNI) is configured.
Recommended Response Action
Modify the Virtual Extensible LAN (VXLAN) Virtual Network Id(VNI) configuration on the virtual network profile and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the virtual network profile because updating the Virtual Extensible LAN (VXLAN) Virtual Network ID (VNI) attribute is not permitted.
Detailed Description
The virtual network profile cannot be updated because updating the Virtual Extensible LAN (VXLAN) Virtual Network ID (VNI) attribute is not permitted.
Recommended Response Action
If the virtual network requires an update then delete and recreate the Virtual Extensible LAN (VXLAN) Virtual Network ID (VNI).
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the virtual network profile because updating the Virtual Link Trunking (VLT) Virtual LAN (VLAN) ID attribute is not permitted.
Detailed Description
The virtual network profile cannot be updated because updating the Virtual Link Trunking (VLT) Virtual LAN (VLAN) ID attribute is not permitted.
Recommended Response Action
If the Virtual Link Trunking (VLT) Virtual LAN (VLAN) virtual network requires an update then delete and recreate the virtual network.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the network profile because the virtual network name is not entered in the request.
Detailed Description
The network profile cannot be created or updated because the virtual network name is not entered in the request.
Recommended Response Action
Enter a valid virtual network name and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to retrieve the virtual network because the virtual network does not exist.
Detailed Description
The virtual network cannot be retrieved because the virtual network does not exist.
Recommended Response Action
Enter a valid virtual network name and retry the operation again.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the virtual network because the virtual network already exists.
Detailed Description
The virtual network cannot be created because the virtual network already exists.
Recommended Response Action
Enter a different virtual network name and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the virtual network because changing the virtual network type is not permitted on the current virtual network.
Detailed Description
The virtual network properties cannot be updated because changing the virtual network type is not permitted on the current virtual network.
Recommended Response Action
Delete the current virtual network and create a new virtual network by using the necessary virtual network type.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network properties because a valid virtual network type is not entered in the request.
Detailed Description
The virtual network cannot be created or updated because a valid virtual network type is not entered in the request.
Recommended Response Action
Enter a valid virtual network type and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the virtual network because the VLT VLAN value configured on the virtual network is not valid.
Detailed Description
The virtual network cannot be created or updated because the VLT VLAN value configured on the virtual network is not valid.
Recommended Response Action
Enter a valid VLT VLAN value and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network profile because the Ipv6 is configured on the virtual network profile.
Detailed Description
The virtual network profile cannot be created or updated because the Ipv6 is configured on the virtual network profile.
Recommended Response Action
Remove Ipv6 configuration on the virtual network profile and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network profile because the VLT VLAN ID selected is same as the L3 network VLAN ID.
Detailed Description
The virtual network profile cannot be updated because VLT VLAN ID selected is same as the L3 network VLAN ID.
Recommended Response Action
Select a different VLT VLAN ID for the virtual network and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform this operation because Storage FCoE type of network is not supported on fabric interface.
Detailed Description
This operation cannot be applied on this interface because Storage FCoE type of Network is not supported on fabric interface.
Recommended Response Action
Specify a network that has supported network type.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the virtual network profile because this is an automatically created virtual network profile.
Detailed Description
The virtual network profile cannot be deleted because this is an automatically created virtual network profile. Automatically created network profiles cannot be deleted.
Recommended Response Action
Make sure that the network profile is not automatically created, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the virtual network profile because this is either a Management or Control virtual network profile.
Detailed Description
The virtual network profile cannot be deleted because this is either a Management or Control virtual network profile.
Recommended Response Action
The virtual network profile cannot be deleted because this is either a Management or Control virtual network profile.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network profile because the configured VLT VLAN ID is used by another virtual network.
Detailed Description
The virtual network profile cannot be created or updated because the configured VLT VLAN ID is used by another virtual network.
Recommended Response Action
Make sure that a different VLT VLAN ID is selected, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network profile because the configured Virtual Extensible LAN (VXLAN) Virtual Network ID (VNI) is used by another virtual network.
Detailed Description
The virtual network profile cannot be created or updated because the configured Virtual Extensible LAN (VXLAN) Virtual Network ID (VNI) is used by another virtual network.
Recommended Response Action
Enter a different Virtual Extensible LAN (VXLAN) Virtual Network ID (VNI) and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the virtual network profile arg1 because IP addresses are not configured.
Arguments
  • arg1 = network ID
Detailed Description
The virtual network profile mentioned in the message cannot be created or updated because IP addresses are not configured.
Recommended Response Action
Create or update the virtual network profile with IP addresses and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the Storage FCoE network because it is a part of Uplink.
Detailed Description
The Storage FCoE network cannot be deleted because it is a part of Uplink.
Recommended Response Action
Delete the Uplink and retry the operation. OpenManage Enterprise Modular > Fabric > Uplinks > Select Uplink and Delete.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE1020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete or update the network ID because the network has an untagged VLAN of the FCoE Uplink.
Detailed Description
The network ID cannot be deleted or updated because the network has an untagged VLAN of the FCoE Uplink.
Recommended Response Action
Delete the FCoE Uplink and retry the operation. On the OpenManageEnterprise-Modular: 1) Click,Fabric > Uplinks. 2) Click Uplink. 3) ClickDelete.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the EVPN L3 VNI ID because an invalid VNI ID is entered.
Detailed Description
The EVPN L3 VNI ID cannot be configured because an invalid VNI ID is entered.
Recommended Response Action
Enter a valid VNI ID that is less than or equal to 16777215, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the EVPN L3 VNI ID because it is already assigned on another VRF.
Detailed Description
The EVPN L3 VNI ID cannot be configured because it is already assigned to another VRF.
Recommended Response Action
Use a different EVPN L3 VNI ID, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the EVPN L3 VNI ID because it is already used in the system.
Detailed Description
The EVPN L3 VNI ID cannot be configured because it is already assigned to a virtual network in the system.
Recommended Response Action
Use a different EVPN L3 VNI ID, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform create/update/delete operation because the VRF name is not entered.
Detailed Description
The create/update/delete operation cannot be performed because the VRF name is not entered.
Recommended Response Action
Enter a valid VRF name and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform update or delete operation because the VRF does not exist.
Detailed Description
The update or delete operation cannot be performed because the VRF does not exist.
Recommended Response Action
Provide a valid VRF name, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create a VRF because a VRF with the given name already exists.
Detailed Description
The VRF cannot be created because a VRF with the given name already exists.
Recommended Response Action
Change the VRF name and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete the VRF because it is the default VRF.
Detailed Description
The delete operationcannot be performed on the default VRF.
Recommended Response Action
Make sure that the VRF is not the default VRF and retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVNE2008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure EVPN L3 VNI ID because a VNI ID is already configured on the VRF.
Detailed Description
A new EVPN L3 VNI ID cannot be configured because a VNI ID is already configured on the VRF.
Recommended Response Action
Delete the existing EVPN L3 VNI ID, and then retry the operation.
Category
Configuration (NVNE = Network)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\