PowerEdge Servers Error and Event Messages Reference Guide

PDF

NVSE—Server Interface Event Messages

NVSE0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the Server ID is not entered in the input.
Detailed Description
The request cannot be processed because the Server ID is not entered in the input.
Recommended Response Action
Enter a valid Server ID and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the ServerInterfaceID is missing in the input.
Detailed Description
The request cannot be processed because the ServerInterfaceID is missing in the input.
Recommended Response Action
Enter a valid ServerInterfaceID and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create a server profile because the server profile already exists.
Detailed Description
The server profile cannot be created because the server profile already exists.
Recommended Response Action
Enter a new server profile name and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create a server interface profile because the server interface profile already exists.
Detailed Description
The server interface profile cannot be created because the server interface profile already exists.
Recommended Response Action
Enter a new server interface profile name and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or retrieve server profile because the server profile does not exist.
Detailed Description
The server profile cannot be created or retrieved because the server profile does not exist.
Recommended Response Action
Enter a valid server profile name and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure or retrieve server interface profile because it does not exist.
Detailed Description
The server interface profile cannot be retrieved or configured because it does not exist.
Recommended Response Action
Enter a valid server interface profile name and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure server interface profile because the FCoE bandwidth partition is not matching with the other server interface profiles on this server profile.
Detailed Description
The server interface profile cannot be created because the FCoE bandwidth partition is not matching with the other server interface profiles on this server profile.
Recommended Response Action
Enter a valid FCoE bandwidth partition and retry the operation again.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure server interface profile because the native VLAN value configured on the server interface profile is invalid.
Detailed Description
The server interface profile cannot be created because the native VLAN value configured on the server interface profile in invalid.
Recommended Response Action
Enter a valid native VLAN and retry the operation again.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the Server Interface Profile because the Percentage Bandwidth value entered for configuring the Server Interface Profile is invalid.
Detailed Description
The Server Interface Profile cannot be configured because the Percentage Bandwidth value entered for configuring the Server Interface Profile is invalid.
Recommended Response Action
Enter a valid Percentage Bandwidth value and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the Server Interface Profile because a Storage FCoE type of Network and a Native VLAN is configured on this Server Interface Profile.
Detailed Description
The Server Interface Profile cannot be created or updated because a Storage FCoE type of Network and Native VLAN are both configured on this Server Interface Profile.
Recommended Response Action
Remove the Native VLAN configuration from the Server Interface Profile and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the server interface profile because of a mismatched network type configured on the server interface.
Detailed Description
The server interface profile cannot be created or updated because of a mismatched network type configured on the server interface.
Recommended Response Action
Remove the conflicting network configuration on the server interface, and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the server interface profile because there is a Layer3 Routed network configured (as tagged network) on the server interface.
Detailed Description
The server interface profile cannot be created because there is a Layer3 Routed network configured (as tagged network) on the server interface.
Recommended Response Action
Remove the Layer3 Routed network from the tagged network list on the server interface and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the server interface profile because there are duplicate networks configured.
Detailed Description
The server interface profile cannot be created or updated because there are duplicate network configured.
Recommended Response Action
Remove the duplicate network configuration from the server interface and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the server interface profile because the network change from tagged network to untagged network or vice-versa is not allowed on the server interface.
Detailed Description
The server interface profile cannot be created or updated because the network change from tagged network to untagged network or vice verser is not allowed on the server interface.
Recommended Response Action
Delete the network configuration, and reconfigure the networks on the server interface to change from tagged to untagged, or from untagged to tagged.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the server interface profile because the static onboard interface is already used by another server interface profile.
Detailed Description
The server interface profile cannot be created or updated because the static onboard interface is already used by another server interface profile.
Recommended Response Action
Modify the server interface profile by using a static onboard interface which is not in use and then retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create or update the server interface profile because either the untagged VLAN field is empty or the native VLAN (VLAN 1) is entered along with one of the FCoE-enabled networks in tagged Network.
Detailed Description
The server interface profile cannot be completed because either the untagged VLAN field is empty or the native VLAN (VLAN 1) is entered along with one of the FCoE-enabled networks in tagged Network.
Recommended Response Action
Do any one of the following and retry the operation: 1) Update the server interface profile by entering an untagged VLAN ID in the server port which is same as the FCoE uplink ports or 2) Remove the native VLAN (VLAN 1) from the tagged network and update the untagged VLAN as the native VLAN (VLAN 1) .
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to either create or update the server template because the server type already exists.
Detailed Description
The server template cannot be either created or updated because because the server type already exists.
Recommended Response Action
Enter a unique server type and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0027

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to associate the network ID because the L3 routed network is associated with one of the Uplinks.
Detailed Description
The network ID cannot be associated to the Uplink profile because the L3 routed network is associated with one of the Uplinks.
Recommended Response Action
Delete the Uplink profile that is already associated with this L3 routed network and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to associate the network ID because the L3 routed network is associated with one of the server profiles.
Detailed Description
The network ID cannot associated because the L3 routed network is associated with one of the server profiles.
Recommended Response Action
Delete the server profile that is already associated with this L3 routed network and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0029

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to retrieve server template because it is not available in the template database.
Detailed Description
The server template cannot be retrieved because it is not available in the template database.
Recommended Response Action
Enter a valid server template name and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0030

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure or update the server interface template because the server interface can accept only one FCoE VLAN network in a template.
Detailed Description
The server interface template cannot be configured or updated because the tagged networks must not have more than one FCoE VLAN network.
Recommended Response Action
Make sure that the server interface template has only one FCoE VLAN network and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0031

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to assign the selected server type because editing of this server type is not supported.
Detailed Description
The selected server type cannot be assigned because editing of this server type is not supported.
Recommended Response Action
Delete the current server template and create a new template by using the required server type.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

NVSE0032

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the server template because the server template name already exists.
Detailed Description
The server template cannot be created because the server template name already exists.
Recommended Response Action
Enter a unique server template name and retry the operation.
Category
Configuration (NVSE = Server Interface)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\