PowerEdge Servers Error and Event Messages Reference Guide
POW—Power Usage Event Messages
POW000
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power on permission error, chassis infrastructure not ready.
- Detailed Description
- Host failed to power up because chassis infrastructure is not ready. This messages has been replaced by Message ID PWR2250.
- Recommended Response Action
- Check status of chassis infrastructure.
- Category
- Audit (POW = Power Usage)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
POW001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power on permission error, chassis cover open.
- Detailed Description
- Host failed to power up because chassis cover is open. This messages has been replaced by Message ID PWR2251.
- Recommended Response Action
- Check chassis cover.
- Category
- Audit (POW = Power Usage)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
POW002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power on permission error, unknown component installed in Fabric1/Fabric2.
- Detailed Description
- Host failed to power up because unsupported components installed in Fabric1/fabric2. This message has been replaced by Message ID PWR2252.
- Recommended Response Action
- Check for unsupported components installed in Fabric1/Fabric2.
- Category
- Audit (POW = Power Usage)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
POW003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power on permission error, no PCI/Mezz card installed in Fabric1/Fabric2.
- Detailed Description
- Host failed to power up because PCI/Mezz cards not installed in Fabric1/Fabric2. This message has been replaced by Message ID PWR2253.
- Recommended Response Action
- Install PCI/Mezz card in Fabric1/Fabric2.
- Category
- Audit (POW = Power Usage)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
POW004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power on permission error, unacknowledged use of 110V.
- Detailed Description
- Host failed to power up because of unacknowledged use of 110V. This messages has been replaced by Message ID PWR2254.
- Recommended Response Action
- Check for unacknowledged use of 110V.
- Category
- Audit (POW = Power Usage)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
POW005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Power on permission error, CMC is in MPCM mode.
- Detailed Description
- Host failed to power up because CMC MPCM mode is enabled. This messages has been replaced by Message ID PWR2255.
- Recommended Response Action
- Disable MPCM mode to power up.
- Category
- Audit (POW = Power Usage)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
- Applicable Event or Alert Types
- CMC—Not Applicable
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\