PowerEdge Servers Error and Event Messages Reference Guide

PDF

SDK—iDRAC Extensibility SDK Event Messages

SDK0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was successfully installed.
Arguments
  • arg1 = name
Detailed Description
The iDRAC SDK Plugin identified in the message was successfully installed.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was successfully updated to version arg2.
Arguments
  • arg1 = name
  • arg2 = version
Detailed Description
The iDRAC SDK plugin identified in the message was successfully updated to the version shown.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was successfully removed.
Arguments
  • arg1 = name
Detailed Description
The iDRAC SDK plugin identified in the message was successfully removed.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was successfully started.
Arguments
  • arg1 = name
Detailed Description
The iDRAC SDK plugin identified in the message was successfully started.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was not started because its required hardware is not present in the system.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was not started because the required hardware is not present in the system.
Recommended Response Action
Review the plugins documentation for which hardware it supports. Install the required hardware or remove the plugin.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was not started because the iDRAC firmware does not support this version of plugin.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was not started because the plugin version is not compatible with the running iDRAC version.
Recommended Response Action
Review the plugins documentation for which version of iDRAC firmware is required. Update the plugin or update the iDRAC firmware to achieve version compatibility.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was enabled.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was enabled.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was disabled.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was disabled.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was not started because the plugin was disabled.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was not started because it was disabled.
Recommended Response Action
To allow the plugin to start, navigate to the plugin management page and enable the plugin.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 stopped unexpectedly.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message stopped unexpectedly.
Recommended Response Action
No response action is required. If the plugin continues to stop unexpectedly then update it to the latest version.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
3083
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 became unresponsive and was restarted.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message became unresponsive and was restarted.
Recommended Response Action
No response action is required. If the plugin continues to be unresponsive then update it to the latest version.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
3083
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was not started because its hardware is being managed by a different plugin.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was not started because its supported hardware is being managed by a different plugin.
Recommended Response Action
Review all installed plugin documentation for their supported hardware. Remove or update plugins as needed to achieve the desired configuration.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was disabled due to repeated failures.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message encountered multiple failures so was disabled.
Recommended Response Action
Uninstall (remove) the plugin. Install a later version if available.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
3082
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 encountered an integrity check failure.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message encountered a runtime integrity check failure.
Recommended Response Action
Remove the plugin and re-install.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
3082
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin image arg1 was not installed since a local limit was exceeded.
Arguments
  • arg1 = name
Detailed Description
The plugin image could not be installed because a limit was exceeded. Consult the iDRAC SDK User Guide.
Recommended Response Action
If too many plugins are installed you may uninstall someothersso that this plugin may be successfully installed.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 failed an integrity check so could not be started.
Arguments
  • arg1 = name
Detailed Description
The iDRAC SDK plugin failed integrity check so could not be started.
Recommended Response Action
Uninstall the plugin and reinstall.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
3082
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to process the request because the iDRAC SDK plugin arg1 requested for the arg2 feature which is unauthorized on this plugin.
Arguments
  • arg1 = pulginName
  • arg2 = featureName
Detailed Description
The iDRAC SDK plugin requested for the feature which is unauthorized for this plugin.
Recommended Response Action
Make sure that the plugin supports the requested feature and retry the operation. If necessary, uninstall the current plugin and install a compatible version. For information about features supported by the iDRAC SDK plugin, see the iDRAC Users Guide available on the support site.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 could not be started because its platform requirements, arg2, are not met.
Arguments
  • arg1 = pluginName
  • arg2 = requirementString
Detailed Description
The iDRAC SDK plugin could not be started because its platform requirements are not met as identified in the message.
Recommended Response Action
Uninstall the plugin and install it on an iDRAC that meets the requirements of the plugin. Refer to the plugin documentation available on the support site for information about its iDRAC system requirements. For information about platform capabilities, refer to the iDRAC Users Guide.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
11274
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The App Extension arg1 has reported the following message for informational purpose only: arg2, arg3.
Arguments
  • arg1 = Plugin_Name
  • arg2 = Status_ID
  • arg3 = Reason
Detailed Description
The App Extension identified in the message reported informational status.
Recommended Response Action
For more information about the message, see the technical documentation of the respective App extension available on the support site.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
3083
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The App Extension arg1 has reported the following warning message: arg2, arg3.
Arguments
  • arg1 = Plugin_Name
  • arg2 = Status_ID
  • arg3 = Reason
Detailed Description
The App Extension identified in the message reported warning status.
Recommended Response Action
For more information about the message, see the technical documentation of the respective app extension available on the support site.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Warning
Trap/EventID
3082
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The App Extension arg1 has reported the following critical message: arg2, arg3.
Arguments
  • arg1 = Plugin_Name
  • arg2 = Status_ID
  • arg3 = Reason
Detailed Description
The App Extension identified in the message has reported a critical message.
Recommended Response Action
For more information about the message, see the technical documentation of the respective app extension available on the support site.
Category
System Health (SDK = iDRAC Extensibility SDK)
Severity
Critical
Trap/EventID
3081
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0100

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The operation succeeded.
Detailed Description
The user operation was successful.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0101

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The operation failed.
Detailed Description
The user operation failed.
Recommended Response Action
Retry the operation. If it continues to fail reboot iDRAC.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0102

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The operation did not complete within the expected time.
Detailed Description
The user operation exceeded the expected time duration.
Recommended Response Action
Wait for a short time then retrieve updated status for theoperation and consule the Lifecycle Controller logs. If necessary repeat the operation.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Warning
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0103

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The operation did not succeed because the plugin is busy.
Detailed Description
The user operation did not succeed because the plugin was busy.
Recommended Response Action
Wait for a short time then retry the operation. If the problem persists, reboot the iDRAC and retry.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0104

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 was upgraded and the older version has been removed.
Arguments
  • arg1 = Plugin_Name
Detailed Description
The iDRAC SDK plugin identified in the message was upgraded and the older version has been removed.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log, Power Off, Power Cycle, Reset
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0105

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 has been uninstalled because a newer version is already installed.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message was uninstalled and a newer version of plugin has been installed.
Recommended Response Action
No response action is required.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log, Power Off, Power Cycle, Reset
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0106

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC SDK plugin arg1 is not compatible with the iDRAC firmware version, and therefore, the plugin is disabled.
Arguments
  • arg1 = name
Detailed Description
The iDRAC SDK plugin version identified in the message is not compatible with the iDRAC firmware version, and therefore, the plugin is disabled.
Recommended Response Action
For information about the latest or supported version of the plugin, see the iDRAC or Plugin Release Notes available on the support site.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log, Power Off, Power Cycle, Reset
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0107

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to install the iDRAC SDK plugin arg1 because it is not supported by the iDRAC and has been disabled.
Arguments
  • arg1 = name
Detailed Description
The plugin identified in the message cannot be installed because the plugin version is not compatible with iDRAC firmware.
Recommended Response Action
Ensure that the SDK plugin version is supported and retry the operation. For information about the latest or supported version of the plugin, see the iDRAC or Plugin Release Notes available on the support site.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log, Power Off, Power Cycle, Reset
Applicable Event or Alert Types
CMC—Filter Visibility

SDK0108

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The iDRAC is not able to perform the arg1 operation for the iDRAC SDK plugin arg2, because the plugin does not support this operation.
Arguments
  • arg1 = operationName
  • arg2 = name
Detailed Description
The iDRAC SDK plugin version identified in the message is unable to perform the operation. because the operation is not supported by the plugin.
Recommended Response Action
Ensure that only supported operations are performed and retry the operation. ** For information about the plugins that support the required operations, see the iDRAC or Plugin Release Notes available on the support site.
Category
Configuration (SDK = iDRAC Extensibility SDK)
Severity
Informational
Trap/EventID
11275
Redfish Event Type
Alert
Applicable Event or Alert Types
iDRAC—Filter Visibility, IPMI Alert*, SNMP Alert, Email Alert, Remote System Log, WS Eventing, Redfish Eventing*, LC Log*, LCD, OS Log, Power Off, Power Cycle, Reset
Applicable Event or Alert Types
CMC—Filter Visibility

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\