PowerEdge Servers Error and Event Messages Reference Guide
SVAL—StorageFabric Validation Alert Event Messages
SVAL0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add alert subscriber arg1 to database because the ID already exists.
- Arguments
- arg1 = alert ID
- Detailed Description
- The alert subscriber identified in the message cannot be added to database because the ID already exists.
- Recommended Response Action
- Enter a valid and unique subscriber ID and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the alert subscriber arg1 to database because the ID does not exist.
- Arguments
- arg1 = alert ID
- Detailed Description
- The alert subscriber identified in the message cannot updated because the ID does not exist.
- Recommended Response Action
- Make sure that the subscriber ID exists by querying all alert subscription and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the alert subscriber arg1 to database because the ID does not exist.
- Arguments
- arg1 = alert ID
- Detailed Description
- The alert subscriber identified in the message cannot deleted because the ID does not exist.
- Recommended Response Action
- Make sure that the subscriber ID exists by querying all alert subscription and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to get the alert subscriber arg1 because the ID does not exist in the database.
- Arguments
- arg1 = alert ID
- Detailed Description
- The alert subscriber identified in the message cannot retrieved because the ID does not exist.
- Recommended Response Action
- Make sure that the subscriber ID exists by querying all alert subscription and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update alert subscriber because an alert subscriber with a similar content already exists.
- Detailed Description
- The alert subscriber cannot be added or updated because an alert subscriber with a similar content already exists.
- Recommended Response Action
- Make sure that the subscription content is different and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update alert subscriber because the data entered in the alert subscriber Protocol field is invalid.
- Detailed Description
- The alert subscriber destination cannot be added or updated because the data entered in the alert subscriber Destination field is invalid.
- Recommended Response Action
- Enter a valid alert subscriber protocol field and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update the alert subscriber because the data entered in the alert subscriber Destination field is invalid.
- Detailed Description
- Enter valid destination field, and retry the operation.
- Recommended Response Action
- Enter a valid alert subscriber destination and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update the alert subscriber because the scheme entered in the alert subscriber Destination field is invalid.
- Detailed Description
- The alert subscriber cannot be added or updated because the scheme entered in the alert subscriber Destination field is invalid.
- Recommended Response Action
- Enter a valid alert scriber scheme in destination and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update the alert subscriber because the host data entered in the alert subscriber Destination field is invalid.
- Detailed Description
- Enter a valid host alert subscriber destination and retry the operation.
- Recommended Response Action
- Enter a valid host alert subscriber destination and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVAL0010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update the alert subscriber because the data entered in the alert subscriber HTTP header is invalid.
- Detailed Description
- The alert subscriber cannot be added or updated because the HTTP header data entered in the alert subscriber is invalid.
- Recommended Response Action
- Enter a valid alert subscriber HTTP header and retry the operation.
- Category
- Configuration (SVAL = StorageFabric Validation Alert)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\