PowerEdge Servers Error and Event Messages Reference Guide
SVLM—StorageFabric Validation Lifecycle Manager Event Messages
SVLM0001
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the request because either the Centralized Discovery Controller instance identifier is invalid or not entered at all.
- Detailed Description
- The Centralized Discovery Controller instance cannot be added because either the Centralized Discovery Controller instance identifier is invalid or not entered at all.
- Recommended Response Action
- Enter a valid Centralized Discovery Controller ID (1-16)and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0002
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the Centralized Discovery Controller instance because either an invalid instance image version is entered or the image version is not entered.
- Detailed Description
- The Centralized Discovery Controller instance cannot be added because either an invalid instance image version is entered or the image version is not entered.
- Recommended Response Action
- Enter a valid centralized discovery controller instance image version and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0003
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the Centralized Discovery Controller instance because an invalid interface name is entered.
- Detailed Description
- The Centralized Discovery Controller instance cannot be added because an invalid interface name is entered.
- Recommended Response Action
- Enter a valid Centralized Discovery Controller interface name and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0004
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the Centralized Discovery Controller instance because an instance with the same instance name already exists.
- Detailed Description
- The Centralized Discovery Controller instance cannot be added because the same instance name already exists.
- Recommended Response Action
- Enter a different and unique Centralized Discovery Controller name and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0005
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the Centralized Discovery Controller instance because the interface arg1 does not have a valid IP address assigned to it.
- Arguments
- arg1 = interfaceName
- Detailed Description
- The Centralized Discovery Controller instance cannot be added because the interface identified in the message does not have a valid IP address assigned to it.
- Recommended Response Action
- Enter a valid Centralized Discovery Controller interface ID and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0006
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the Centralized Discovery Controller instance because the given interface arg1 is part of another Centralized Discovery Controller instance arg2.
- Arguments
- arg1 = interfaceName
- arg2 = instanceName
- Detailed Description
- The Centralized Discovery Controller instance cannot be created because the interface identified in the message is part of another Centralized Discovery Controller instance.
- Recommended Response Action
- Enter a valid unassigned Centralized Discovery Controller interface ID and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0007
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because lifecycle operation is in progress for the given instance.
- Detailed Description
- The operation cannot be completed because the Lifecycle operation is in progress on the instance of the Centralized Discovery Controller.
- Recommended Response Action
- Wait for few minutes and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0008
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because invalid centralized discovery controller instance is given.
- Detailed Description
- The request cannot be processed because an invalid Centralized Discovery Controller instance ID is entered.
- Recommended Response Action
- Enter a valid Centralized Discovery Controller instance and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0009
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because Discovery Admin state is missing.
- Detailed Description
- The Centralized Discovery Controller instance cannot be added or updated because the Discovery Admin State attribute is not entered.
- Recommended Response Action
- Enter a valid Discovery Admin State attribute and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0010
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update the Centralized Discovery Controller instance because the Admin State attribute is not entered.
- Detailed Description
- The Centralized Discovery Controller instance cannot be added or updated because the Admin State attribute is not entered.
- Recommended Response Action
- Enter a valid Admin State attribute and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0011
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or update the Centralized Discovery Controller instance because a management interface arg1 is entered.
- Arguments
- arg1 = interfaceName
- Detailed Description
- The Centralized Discovery Controller instance cannot be added or updated because a management interface name is entered as identified in the message.
- Recommended Response Action
- Enter a valid interface name other than the management interface, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0012
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because internal server issues such as communication or filesystem errors.
- Detailed Description
- The request cannot be processed because internal server issues such as communication or filesystem errors.
- Recommended Response Action
- Retry after some time. If the issue persists, contact your server administrator.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0013
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the authentication method because an invalid method is entered.
- Detailed Description
- The authentication method cannot be configured because an invalid method is entered.
- Recommended Response Action
- Enter a valid authentication method and retry the operation. For example, local, radium, and tacacs.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0014
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the remote authentication server because an invalid server IP is entered.
- Detailed Description
- The remote authentication server cannot be configured because an invalid server IP is entered.
- Recommended Response Action
- Enter a valid IP address of the remote authentication server and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0015
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the remote authentication server because the number of authentication servers are already configured in the system.
- Detailed Description
- The remote authentication server cannot be configured because the number of authentication servers are already configured in the system.
- Recommended Response Action
- Remove the unused remote authentication servers and retry the operation. For information about the maximum number of remote authentication servers you can configure, see the SmartFabric Storage Software User Guide available on the support site.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0016
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to remove the remote authentication server from system configuration because the server is not configured.
- Detailed Description
- The remote authentication server cannot be removed because the server is not configured in the system.
- Recommended Response Action
- Enter a valid IP address of the remote authentication server and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Informational
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0017
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upgrade the SmartFabric Storage Software because either an invalid image version is uploaded or the image vesion is unavailable.
- Detailed Description
- The SmartFabric Storage Software cannot be upgraded because either an invalid image version is uploaded or the image version is unavailable.
- Recommended Response Action
- Upload a valid SmartFabric Storage Software image file and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0018
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upgrade the SmartFabric Storage Software firmware because the version of the uploaded image version is same as the existing the SmartFabric Storage Software.
- Detailed Description
- The SmartFabric Storage Softwarecannot be upgraded because the version of the uploaded image version is same as the existing the NMVe controller.
- Recommended Response Action
- Upload the latest image version of the SmartFabric Storage Software and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0019
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the version of the image is not entered.
- Detailed Description
- The SmartFabric Storage Softwareimage file cannot be added because the version of the image file is not entered.
- Recommended Response Action
- Upload the latest image version of the SmartFabric Storage Software and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0020
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the Image Server username is not entered.
- Detailed Description
- The SmartFabric Storage Software image file cannot be added because the Image Server username is not entered.
- Recommended Response Action
- Enter a valid Image Server username and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0021
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the Image Server password is not entered.
- Detailed Description
- The SmartFabric Storage Software image file cannot be added because the Image Server password is not entered.
- Recommended Response Action
- Enter a valid Image Server password and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0022
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the image file location is not entered.
- Detailed Description
- The SmartFabric Storage Software image file cannot be added because the image file location is not entered.
- Recommended Response Action
- Enter a valid image file location and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0023
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the transport type is not entered.
- Detailed Description
- The SmartFabric Storage Software image file cannot be added because the image file transport type is not entered.
- Recommended Response Action
- Enter a valid image file transport type and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0024
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the image file transport type is invalid.
- Detailed Description
- The SmartFabric Storage Software image file cannot be added because the image file transport type is invalid.
- Recommended Response Action
- Enter a valid image file transport type and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0025
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update or delete the SmartFabric Storage Software image version because the image file version is invalid.
- Detailed Description
- The SmartFabric Storage Software image file cannot be updated or deleted because the image file version is invalid.
- Recommended Response Action
- Enter a valid SmartFabric Storage Software image version to update or delete and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0026
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to upgrade the SmartFabric Storage Software version because the selected version is already installed.
- Detailed Description
- The SmartFabric Storage Software image file cannot be upgraded because the selected version is already installed.
- Recommended Response Action
- No action required.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0027
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image because the image or entry name is already available.
- Detailed Description
- The SmartFabric Storage Software image cannot be added because the image or entry nameis already available.
- Recommended Response Action
- Eitheredit or delete the existing entry and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0028
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the image file location is invalid.
- Detailed Description
- The SmartFabric Storage Software image file cannot be added because the image file location is invalid.
- Recommended Response Action
- Enter a valid image file location and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0029
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add the SmartFabric Storage Software image file because the image file is currently in use.
- Detailed Description
- The SmartFabric Storage Software image file cannot be deleted the image file is currently in use.
- Recommended Response Action
- Disable the instances using this image version by looking at the instance running and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0030
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update the Centralized Discovery Controller instance because the interface is repeated in the configuration.
- Detailed Description
- The Centralized Discovery Controller instance cannot be created or updated because the interface is repeated in the configuration.
- Recommended Response Action
- Remove the duplicate interface values in the configuration and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0031
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid parent interface ID is entered or the ID is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid parent interface ID is entered or the ID is not entered at all.
- Recommended Response Action
- Enter a valid parent interface ID and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0032
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid VLAN ID is entered or the ID is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid VLAN ID is entered or the ID is not entered at all.
- Recommended Response Action
- Enter a valid Vlan ID and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0033
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv4 address is entered or the address is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv4 address is entered or the address is not entered at all.
- Recommended Response Action
- Enter a valid IPv4 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0034
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv4 prefix length is entered or the address is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv4 prefix lengthis entered or the address is not entered at all.
- Recommended Response Action
- Enter a valid IPv4 prefix lengthand retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0035
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv4 gateway is entered or the address is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv4 gateway is entered or the address is not entered at all.
- Recommended Response Action
- Enter a valid IPv4 gateway and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0036
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv6 address is entered or the address is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv6 address is entered or the address is not entered at all.
- Recommended Response Action
- Enter a valid IPv6 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0037
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv6 prefix length is entered or the address is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv6 prefix lengthis entered or the address is not entered at all.
- Recommended Response Action
- Entera a valid IPv6 prefix lengthand retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0038
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv6 gateway is entered or the address is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv6 gateway is entered or the address is not entered at all.
- Recommended Response Action
- Enter a valid IPv6 gateway and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0039
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because the interface name entered already exists.
- Detailed Description
- The request cannot be processed because the interface name entered already exists.
- Recommended Response Action
- Enter a valid and unique interface name, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0040
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid interface name is entered or the name is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid interface name is entered or the name is not entered at all.
- Recommended Response Action
- Enter a valid and unique interface name, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0041
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the interface name because an invalid VLAN interface name is entered.
- Detailed Description
- The interface name cannot be deleted because an invalid VLAN interface name is entered.
- Recommended Response Action
- Select a valid and unique VLAN interface name, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0042
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv4 configuration type is entered or the configuration type is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv4 configuration type is entered or the configuration type is not entered at all.
- Recommended Response Action
- Enter a valid and unique IPv4 configuration type, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0043
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either an invalid IPv6 configuration type is entered or the configuration type is not entered at all.
- Detailed Description
- The request cannot be processed because either an invalid IPv6 configuration type is entered or the configuration type is not entered at all.
- Recommended Response Action
- Enter a valid and unique IPv6 configuration type, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0044
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because either the entered Centralized Distributed Controller instance is not ready or not created at all.
- Detailed Description
- The request cannot be processed because either the entered Centralized Distributed Controller instance is not ready or not created at all.
- Recommended Response Action
- Wait for some time and retry the operation. If the issue persists, verify if the entered Centralized Discovery Controller is created and running. To verify, query all the available instances.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0045
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add or remove the Remote Authentication servers because the server IP address or passkey parameter is not entered.
- Detailed Description
- The Remote Authentication servers cannot be added or removed because the server IP address or passkey parameter is not entered.
- Recommended Response Action
- Enter a valid Remote Authentication server IP address and passkey parameter, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Critical
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0046
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to delete the interface because it is a part of the Centralized Discovery Controller instance.
- Detailed Description
- The interface is part of the Centralized Discovery Controller instance, and cannot be deleted.
- Recommended Response Action
- Enter an interface which is not part of any the Centralized Discovery Controller instance and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0047
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to download or upload the backup image file because the image server user name is not entered.
- Detailed Description
- Unable to download or upload the backup Image, because image server user name is either not entered at all or invalid.
- Recommended Response Action
- Enter a valid image server user name and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0048
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to download or upload the backup image file because the image server password is not entered or invalid.
- Detailed Description
- Unable to download or upload the backup image file, because the image server password is either not entered or invalid.
- Recommended Response Action
- Enter a valid image server password and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0049
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to download or upload the backup image, because the image location is either not entered or invalid.
- Detailed Description
- Unable to download or upload the backup image, because the image location is either not entered or invalid.
- Recommended Response Action
- Enter a valid image location and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0050
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to download or upload the backup image, because the image transport is either not entered or invalid.
- Detailed Description
- Unable to download or upload the backup image, because either image transport is either not entered or invalid.
- Recommended Response Action
- Enter a valid image transport and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0051
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the internal IPv4 address because an invalid address range entered.
- Detailed Description
- Internal IPV4 Range cannot be updated because IPV4 subnet octet is invalid.
- Recommended Response Action
- Enter a valid IPV4 Range and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0052
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the internal IPv6 address because an invalid address range entered.
- Detailed Description
- Internal IPv6 Range cannot be updated because IPv6 subnet segment is invalid.
- Recommended Response Action
- Enter a valid IPV6 Range and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0053
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update the hostname because an invalid hostname is entered.
- Detailed Description
- The hostname cannot be updated because an invalid hostname is entered.
- Recommended Response Action
- Enter a valid hostname and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0054
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or upload the SosReport file because the server user name is not entered.
- Detailed Description
- The SosReport file cannot be created or uploaded because the server username is not entered.
- Recommended Response Action
- Enter a server username and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0055
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or upload the SosReport file because the server password is not entered.
- Detailed Description
- The SosReport file cannot be created or uploaded because the server password is not entered.
- Recommended Response Action
- Enter a server password and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0056
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or upload the SosReport file because either an invalid file name is entered or it is not entered at all.
- Detailed Description
- The SosReport file cannot be created or uploaded because either an invalid file name is entered or it is not entered at all.
- Recommended Response Action
- Enter a valid file name and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0057
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or upload the SosReport file because either invalid transport type is entered or not entered at all.
- Detailed Description
- The SosReport file cannot be created or uploaded because the transport type entered is invalid or not entered at all.
- Recommended Response Action
- Enter a valid transport type and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0058
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create VLAN creation request because the entered VLAN ID already exist.
- Detailed Description
- VLAN interface cannot be created because given VLAN ID already exist.
- Recommended Response Action
- Enter a new VLAN ID and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0059
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure the MTU size because an invalid range is entered.
- Detailed Description
- The MTU size cannot be configured because an invalid range is entered.
- Recommended Response Action
- Enter an MTU size with the 1500-9000 bytes range, and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0060
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the installable image file download request because there is not enough disk space available.
- Detailed Description
- The installable image file cannot be downloaded because of insufficient disk space.
- Recommended Response Action
- Delete unused images and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0061
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add a route because an invalid destination IP is entered.
- Detailed Description
- Routes cannot be added because Destination IP given in Routes is invalid.
- Recommended Response Action
- Enter a valid Destination IP in Routes and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0062
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add a route because an invalid destination prefix is entered.
- Detailed Description
- Routes cannot be added because Destination Prefix given in Routes is invalid.
- Recommended Response Action
- Enter a valid Destination Prefix in Routes and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0063
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add a route because an invalid nexthop IP is entered.
- Detailed Description
- Routes cannot be added because Next Hop IP given in Routes is invalid.
- Recommended Response Action
- Enter a valid Next Hop IP in Routes and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0064
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add a route because an invalid metric value is entered.
- Detailed Description
- Routes cannot be added because Metric value given in Routes is invalid.
- Recommended Response Action
- Enter a valid Metric value in Routes and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0065
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to create or update an interface because the configured MTU value is greater than the parent interface MTU.
- Detailed Description
- An interface cannot be created or updated because the configured MTU value is greater than the parent interface MTU.
- Recommended Response Action
- Make sure that the MTU value is less than or equal to the parent MTU value, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0066
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to update an interface because the MTU value is lesser than the child VLAN interface MTU value.
- Detailed Description
- The interface cannot be update because the entered MTU value is less than its child VLAN interface MTU value.
- Recommended Response Action
- Enter an MTU value that is greater than or equal to its child VLAN MTU value, and then retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0067
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the password because the old password is not entered.
- Detailed Description
- The change password request is unsuccessful because old password is not entered.
- Recommended Response Action
- Enter a valid old password and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0068
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the password because new password is not entered.
- Detailed Description
- The change password request is unsuccessful because new password is not entered.
- Recommended Response Action
- Enter a valid new password and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0069
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the password because of invalid password complexity.
- Detailed Description
- The change password request is unsuccessful because of invalid password entered.
- Recommended Response Action
- Enter a valid password and retry the operation. Refer to the SmartFabric Storage Software API guide for a valid password.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0070
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to change the password because of invalid user name.
- Detailed Description
- The change password request is unsuccessful because of invalid user name entered.
- Recommended Response Action
- Enter a valid username and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0071
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to perform the IP Management operation because an IP Management operation is already is in progress.
- Detailed Description
- The IP Management operation cannot be performed because an IP Managementoperation is already is in progress.
- Recommended Response Action
- Wait for the current IP Management operation to complete, and then retrythe operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0072
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because invalid BGP identifier is not entered.
- Detailed Description
- The BGP configuration is unsuccessful because BGP Identifier is not entered.
- Recommended Response Action
- Enter a valid BGP Identifier and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0073
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because IP address family is not entered.
- Detailed Description
- The BGP configuration is unsuccessful because IP address family is not entered.
- Recommended Response Action
- Enter a valid IP address family and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0074
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because local IP address is not entered.
- Detailed Description
- The BGP configuration is unsuccessful because IP address is not entered.
- Recommended Response Action
- Enter a valid IP address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0075
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because invalid IPv4 address is entered.
- Detailed Description
- The BGP configuration is unsuccessful because invalid IPv4 address is entered.
- Recommended Response Action
- Enter a valid IPv4 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0076
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because invalid IPv6 address is entered.
- Detailed Description
- The BGP configuration is unsuccessful because invalid IPv6 address is entered.
- Recommended Response Action
- Enter a valid IPv6 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0077
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because local asn is not entered.
- Detailed Description
- The BGP configuration is unsuccessful because local ASN is not entered.
- Recommended Response Action
- Enter a valid local ASN value and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0078
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because remote IP address is not entered.
- Detailed Description
- The BGP configuration is unsuccessful because remote IP address is not entered.
- Recommended Response Action
- Enter a valid remote IP address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0079
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because invalid remote IPv4 address is entered.
- Detailed Description
- The BGP configuration is unsuccessful because an invalid remote IPv4 address is entered.
- Recommended Response Action
- Enter a valid remote IPv4 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0080
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because invalid remote IPv6 address is entered.
- Detailed Description
- The BGP configuration is unsuccessful because an invalid remote IPv6 address is entered.
- Recommended Response Action
- Enter a valid remote IPv6 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0081
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because remote asn is not entered.
- Detailed Description
- The BGP configuration is unsuccessful because remote asn is not entered.
- Recommended Response Action
- Enter a valid remote asn and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0082
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because invalid IP address family is entered.
- Detailed Description
- The BGP configuration is unsuccessful because invalid IP address family type is entered.
- Recommended Response Action
- Enter a valid IP Address family and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0083
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because entered local IP address is already exist.
- Detailed Description
- The BGP configuration is unsuccessful because entered local IP address is already exist.
- Recommended Response Action
- Enter a unique local IP address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0084
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to configure BGP because entered remote IP address is already exist.
- Detailed Description
- The BGP configuration is unsuccessful because entered remote IP address is already exist.
- Recommended Response Action
- Enter a unique remote IP address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0086
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because of another restore operation is in progress.
- Detailed Description
- Cannotperform more than one restore at a given point in time.
- Recommended Response Action
- Retrythe operation after ongoing Restore operation is completed.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0087
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because Centralized Discovery Controller instances are present.
- Detailed Description
- Restore operation is not allowed when Centralized Discovery Controllerinstances present.
- Recommended Response Action
- No recommended response action is required.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0088
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to add/update the Centralized Discovery Controller because invalid number of interfaces are entered.
- Detailed Description
- The number of interfaces given falls out the range of 1-16.
- Recommended Response Action
- The maximum allowed number of interface is 16. Make sure you have interfaces between 1 to 16 and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0089
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because parent interface is not disabled.
- Detailed Description
- VLAN interface cannot be created because parent interface is not disabled.
- Recommended Response Action
- Disablethe parent interface and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0090
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because VLAN interfaces to the given interface already exists.
- Detailed Description
- Interface config type cannot be updated because VLAN interfaces to the given interface already exists.
- Recommended Response Action
- Delete VLAN interfaces for the given interface and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0091
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because given IPv4 address is already configured.
- Detailed Description
- Cannotcreate or update the interface because given IPv4 address is already configured.
- Recommended Response Action
- Entera unique IPv4 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
SVLM0092
NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the
Applicable Event or Alert Types section.
- Message
- Unable to process the request because given IPv6 address is already configured.
- Detailed Description
- Cannotcreate or update the interface because given IPv6 address is already configured.
- Recommended Response Action
- Entera unique IPv6 address and retry the operation.
- Category
- Configuration (SVLM = StorageFabric Validation Lifecycle Manager)
- Severity
- Warning
- Redfish Event Type
- Not Applicable
- Applicable Event or Alert Types
- No alerts are applicable for this message
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\