PowerEdge Servers Error and Event Messages Reference Guide

PDF

SVZN—StorageFabric Validation Zone Event Messages

SVZN0001

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to configure the zone because the zone database is not initialized.
Detailed Description
The zone configuration cannot be performed because the zone database is not initialized.
Recommended Response Action
Retry after some time. If the issue persists, contact your server administrator.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0002

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the zone group entered does not exist.
Detailed Description
The requestedoperation cannot be performed because the zone group entered does not exist.
Recommended Response Action
Enter a valid zone group and retry the operation. For information about existing zone group, query all available zone groups.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0003

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the entered zone does not exist.
Detailed Description
The requested operation cannot be performed because the zone identified in the message does not exist.
Recommended Response Action
Enter a valid zone name and retry the operation. For information about existing zone, query all available zones under a specific zone group.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0004

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the zone member name entered does not exist.
Detailed Description
The requested operation cannot be performed because the zone member identified in the message does not exist.
Recommended Response Action
Enter a valid zone member and retry the operation. For information about existing zone members under a zone , query all available zone members under a specific zone.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0005

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to deactivate the zone group because the zone group entered is invalid.
Detailed Description
The zone group cannot be deactivated because the an invalid data group is entered.
Recommended Response Action
Enter a valid active zone group name and retry the operation. For information about existing active zone group query all available active zone groups from the active zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0006

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to activate the zone group because the zone group entered is invalid.
Detailed Description
The zone group cannot be activated because the given zone group entered is invalid.
Recommended Response Action
Enter a valid configured zone group and retry the operation. For information about existing configuredzone groups, query all available configured zone groups from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0007

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add the zone alias because it already exists.
Detailed Description
The zone alias cannot be added because it already exists.
Recommended Response Action
Enter a unique zone alias and retry the operation. For information about existing zone alias query all available zone alias from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0008

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the zone alias entered does not exist.
Detailed Description
The operation requested cannot be performed because the zone alias specified does not exist.
Recommended Response Action
Enter a valid zone alias and retry the operation. For information about existing zone aliases , query all available zone aliases from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0009

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add the zone alias member because it already exists.
Detailed Description
The zone alias member cannot be added because it already exists.
Recommended Response Action
Enter a unique zone alias member and retry the operation. For information about existing zone alias members, query all available zone alias members from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0010

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the zone alias member entered does not exist.
Detailed Description
The operation requested cannot be performed because the zone alias member entered does not exist.
Recommended Response Action
Enter a valid zone alias member and retry the operation. For information about existing zone alias members , query all available zone alias members from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0011

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the zone member type entered is invalid.
Detailed Description
The operation requested cannot be performed because the zone member type entered is invalid.
Recommended Response Action
Enter a valid zone member type and retry the operation. The supported zone member types are NVMe Qualified Name, FullQualifiedName, and ZoneAlias.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0012

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the operation because the zone member role entered is invalid.
Detailed Description
The requested operation cannot be performed because the zone member role entered is invalid.
Recommended Response Action
Enter a valid zone member role and retry the operation. The supported roles areHost and Subsystem.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0013

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to activate the zone group because the default zoning policy is "allow all".
Detailed Description
User can only activate a zone group when the default zoning policy is "deny all".
Recommended Response Action
Change the default zoning policy to "deny all" and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0014

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the default zoning policy to "allow all" because there are activated zone groups.
Detailed Description
User can only change the default zoning policy to "allow all" when all the zone groups are in the deactivated state.
Recommended Response Action
Deactivate all the zone groups and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0015

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to update the Global zoning policy because the Centralized Discovery Controller global database entry is unavailable.
Detailed Description
The Centralized Discovery Controller global database entry is unavailable, so user cannot update the Global zoning policy.
Recommended Response Action
Retry after some time. If the issue persists, contact your server administrator.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0016

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add the zone group because it already exists.
Detailed Description
The zone group cannot be added because it already exists in the database.
Recommended Response Action
Enter a unique zone group and retry the operation. For information about existing zone group query all available zone groups from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0017

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add the zone because it already exists.
Detailed Description
The zone cannot be added because it already exists in the database.
Recommended Response Action
Enter a unique zone and retry the operation. For information about existing zone query all available zones in zone group from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0018

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add the zone member because it already exists.
Detailed Description
The zone member cannot be added because it already exists in the database.
Recommended Response Action
Enter a unique zone member and retry the operation. For information about existing zone members, query all available zone member in zone from config zone database.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0019

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to delete zone group because it is already activated.
Detailed Description
The zone group cannot be deleted because it is in activate state.
Recommended Response Action
Deactivate the zone group and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0020

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the zone member because Fully Qualified Name zone member Id format is invalid.
Detailed Description
The zone member cannot be created because of the invalid Fully Qualified Name zone member Id format.
Recommended Response Action
Enter a valid Fully Qualified Name and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0021

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the zone member because the NQN or Fully Qualified Name zone member Id format is invalid.
Detailed Description
The zone member cannot be created because NQN is invalid or invalid Fully Qualified Name zone member Id format.
Recommended Response Action
Enter a valid NQN and Fully Qualified Name zone member Id format retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0022

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the zone member because the TCP Port or Fully Qualified Name zone member Id format is invalid.
Detailed Description
The zone member cannot be created because the TCP Port is invalid or Fully Qualified Name zone member Id format is invalid.
Recommended Response Action
Enter valid TCP port and Fully Qualified Name zone member Id format and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0023

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the zone member because the IP address or address family or Fully Qualified Name zone member Id format is invalid.
Detailed Description
The zone member cannot be created because the IP address or address family or Fully Qualified Name zone member Id format is invalid.
Recommended Response Action
Enter valid IP address or address family and Fully Qualified Name zone member Id format and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0024

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the zone member because the PortId or Fully Qualified Name zone member Id format is invalid.
Detailed Description
The zone member cannot be created because the Port Id is invalid or Fully Qualified Name zone member Id format is invalid.
Recommended Response Action
Enter valid Port Id and Fully Qualified Name zone member Id format and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0025

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to create the zone member because the TSAS or Fully Qualified Name zone member Id format is invalid.
Detailed Description
The zone member cannot be created because the TSAS is invalid or Fully Qualified Name zone member Id format is invalid.
Recommended Response Action
Enter valid TSAS and Fully Qualified Name zone member Id format and retry the operation.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0026

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to enable Fabric Zoning feature as default Zoning policy is enabled.
Detailed Description
User can enable fabric zoning feature only when default zoning policy isenabled.
Recommended Response Action
Disable default zoning policy and then enable the feature Fabric Zoning.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0027

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add Zone member type or Alias zone member type for Zone group created by Fabric Zoning.
Detailed Description
For Zonegroup created via Fabric Zoning, the user is not allowed to add Zone members unsupported type mentioned in the message.
Recommended Response Action
No response action is required.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0028

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to enable default zoning policy as Fabric Zoning feature is enabled.
Detailed Description
User can enable default zoning policy only when Fabric Zoning feature isdisabled.
Recommended Response Action
Disable Fabric zoning feature and re-enable default zoning policy.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0029

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to edit Zone Group as it is locked by remote.
Detailed Description
User cannot edit Zone Group that are locked by remote.
Recommended Response Action
User has to wait for remote end to unlock the Zone Group. It takes 30sec for lock to be automatically revoked when held by remote.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0030

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to add Zone Member with NQNs of other subsystems because this operation is not allowed in Fabric Zoning.
Detailed Description
For Zone Group created by remote, the user is not allowed to add Zone members oftype subsystem which are not registered by that remote entity.
Recommended Response Action
Enter valid configuration with Zone member valuescontaining data registered by the subsystem.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0031

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to unlock Zone Group because this operation is not allowed in manual Zone Group.
Detailed Description
Unlock configuration is not applicable to manual Zone Group.
Recommended Response Action
No repsonse action is required.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

SVZN0032

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Unable to perform the requested operation because it is not supported.
Detailed Description
Invalid operation Unlock Zone Group disable is attempted. Only Unlock Zone Group enable is allowed.
Recommended Response Action
No response action is required.
Category
Configuration (SVZN = StorageFabric Validation Zone)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
No alerts are applicable for this message

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\