PowerEdge Servers Error and Event Messages Reference Guide

PDF

TST—Test Alert Event Messages

TST100

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
The operation was successful.
Detailed Description
The operation completed successfully.
Recommended Response Action
No response action is required.
Category
Configuration (TST = Test Alert)
Severity
Informational
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

TST101

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Resource allocation failure.
Detailed Description
The operation did not complete successfully because of lack of memory or file space in the iDRAC firmware.
Recommended Response Action
Reset the iDRAC and retry the operation.
Category
Configuration (TST = Test Alert)
Severity
Critical
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

TST102

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Email alert destination address not configured.
Detailed Description
The destination address of the email is not configured.
Recommended Response Action
Configure the email alert destination address and retry the operation.
Category
Configuration (TST = Test Alert)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

TST103

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Missing parameters arg1
Arguments
  • arg1 = parameter names
Detailed Description
One or more required parameters needed for the operation are missing.
Recommended Response Action
To provide the correct parameters, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (TST = Test Alert)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

TST104

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
SNMP traps not configured.
Detailed Description
The SNMP trap being tested is not properly configured.
Recommended Response Action
Configure the SNMP trap and retry the operation. If the issue persists, reset iDRAC.
Category
Configuration (TST = Test Alert)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

TST105

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Invalid parameter value for arg1.
Arguments
  • arg1 = parameter name
Detailed Description
The value provided for the specified parameter is invalid.
Recommended Response Action
To provide the correct value for the specified parameter, see Lifecycle Controller-Remote Services documentation.
Category
Configuration (TST = Test Alert)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

TST106

NOTE: Event or Alert types that are enabled by default are identified using an asterisk (*) symbol in the Applicable Event or Alert Types section.
Message
Email alert destination address not configured.
Detailed Description
The email alert being tested is not properly configured.
Recommended Response Action
Configure the email alert and retry the operation. If the failure persists, reset iDRAC.
Category
Configuration (TST = Test Alert)
Severity
Warning
Redfish Event Type
Not Applicable
Applicable Event or Alert Types
iDRAC—Filter Visibility, Remote System Log, Redfish Eventing*, LC Log*
Applicable Event or Alert Types
CMC—Not Applicable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\