Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.05.05.05 User's Guide

PDF

Configuring IPMI Over LAN Using RACADM

To configure IPMI over LAN using set or config command:
  1. Enable IPMI over LAN:
    • Using config command: racadm config -g cfgIpmiLan -o cfgIpmiLanEnable 1
    • Using set command: racadm set iDRAC.IPMILan.Enable 1
    NOTE This setting determines the IPMI commands that are executed using IPMI over LAN interface. For more information, see the IPMI 2.0 specifications at intel.com.
  2. Update the IPMI channel privileges:
    • Using config command: racadm config -g cfgIpmiLan -o cfgIpmiLanPrivilegeLimit <level>
    • Using set command: racadm set iDRAC.IPMILan.PrivLimit <level>
    where <level> is one of the following: 2 (User), 3 (Operator) or 4 (Administrator)
  3. Set the IPMI LAN channel encryption key (if required):
    • Using config command: racadm config -g cfgIpmiLan -o cfgIpmiEncryptionKey <key>
    • Using set command: racadm set iDRAC.IPMILan.EncryptionKey <key>
    where <key> is a 20-character encryption key in a valid hexadecimal format.
    NOTE The iDRAC IPMI supports the RMCP+ protocol. For more information, see the IPMI 2.0 specifications at intel.com.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\