iDRAC9 Version 5.10.10.05 Release Notes

Release Summary

PDF

Automation — API and CLI

Table 1. Redfish displays 404 error for new update jobs For a newly created update job after iDRAC was updated, Redfish may display 404 error if you perform a Get method to see the details for the job.
Description	For a newly created firmware update job post an iDRAC update, Redfish may display 404 error if you perform a Get method to see the details for the job.
Workaround	Perform the following: Ensure that the Remote API status (LC Status) is ready, post the iDRAC update. Create the firmware update job again. Wait for about 3 minutes. Perform the Get method for job status.
Systems Affected	All systems supported by this release
Tracking number	224189

Table 2. GPU temp sensor information not displayed in IPMI GPU temperature sensor may not display the relevant sensor information while using IPMI tool.
Description	GPU temperature sensor may not display the relevant sensor information while using IPMI tool.
Workaround	To access the information, use the iDRAC GUI, RACADM, or Redfish interfaces.
Systems Affected	All systems supported by this release.
Tracking number	214501

Table 3. ACK command fails to clear the system status The RACADM ACK command may fail to clear any critical events displayed in the iDRAC summary, that are caused by hot plugging a 3.5" drive.
Description	The RACADM ACK command may fail to clear any critical events displayed in the iDRAC summary, that are caused by hot plugging a 3.5" drive.
Workaround	N/A
Systems Affected	PowerEdge XE7420 and PowerEdge XE7440
Tracking number	208273

Table 4. RLCE reports Incorrect value for fan sensor Redfish Life Cycle Events may report incorrect data for fan sensor URI after a hot pluggable fan is removed.
Description	Redfish Life Cycle Events may report incorrect data for fan sensor URI after a hot pluggable fan is removed.
Workaround	Restart the host system.
Systems Affected	All systems supported by this release.
Tracking number	193777

Table 5. Service Validator reporting errors for Redfish API services To continue support firmware backward compatible, you may get errors for Redfish API services in the Service Validator. They do not have any functional impact on the system and may be ignored.
Description	To continue support firmware backward compatible, you may get errors for Redfish API services in the Service Validator. They do not have any functional impact on the system and may be ignored.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	183321

Table 6. Performing GET with Top query parameter returns no error Top query on a Parity URI instance returns complete response instead of an error code.
Description	Top query on a Parity URI instance returns complete response instead of an error code.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	175801

Table 7. Performing GET method on chassis PCIe slots displays all PCIe slots iDRAC displays all the empty and populated slots as part of PCIe empty slot feature. All the 8 slots entries are seen under one sled even though only few are associated with that particular sled.
Description	iDRAC displays all the empty and populated slots as part of PCIe empty slot feature. All the 8 slots entries are seen under one sled even though only few are associated with that particular sled.
Workaround	N/A
Systems Affected	PowerEdge FC640, PowerEdge R740XD
Tracking number	172943

Table 8. Uploaded firmware link not available in SoftwareImages property While performing GET method on BIOS or Manager Schema through Redfish, the SoftwareImages property may not display the uploaded firmware link.
Description	While performing GET method on BIOS or Manager Schema through Redfish, the SoftwareImages property may not display the uploaded firmware link.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	156737

Table 9. Attributes for CNA cards not displayed through Redfish or RACADM interface If the partitions are disabled on FCoE capable CNA cards, few HII attributes values for WWN, VirtWWN, WWPN, VirtWWPN are displayed in the iDRAC GUI's Network page. However, the same data is not displayed when Get commands are performed in Redfish and RACADM interfaces.
Description	If the partitions are disabled on FCoE capable CNA cards, few HII attributes values for WWN, VirtWWN, WWPN, VirtWWPN are displayed in the iDRAC GUI's Network page. However, the same data is not displayed when Get commands are performed in Redfish and RACADM interfaces.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	151560

Table 10. Unable to create a recurring job after same job was completed Creating a recurring job will fail if the same job was completed recently and its Task ID still exists.
Description	Creating a recurring job will fail if the same job was completed recently and its Task ID still exists.
Workaround	Wait for ten minutes for the Task ID to be deleted.
Systems Affected	All systems supported by this release.
Tracking number	147501

Table 11. Get operation not displaying model or serial number for PCIe devices If you perform a Get operation for a PCIe device using Redfish API, the response may not display the model and serial number of the device.
Description	If you perform a Get operation for a PCIe device using Redfish API, the response may not display the model and serial number of the device.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	111564