iDRAC9 Version 5.10.10.05 Release Notes

Release Summary

PDF

Monitoring and alerting

Table 1. CPU temperature is greater than the upper critical threshold SEL may display "CPU temperature is greater than the upper critical threshold" during an OS reboot.
Description	SEL may display "CPU temperature is greater than the upper critical threshold" during an OS reboot.
Workaround	Check the corrected SEL after the reboot operation is complete.
Systems Affected	PowerEdge XE8545
Tracking number	217677

Table 2. Chassis manager reset not captured in LC LogsIf cmreset command is performed through RACADM interface, LC logs may fail to collect some logs.
Description	Lifecycle (LC) logs do not capture the chassis manager reset operation that is performed through RACADM interface.
Workaround	N/a
Systems Affected	All DCS systems supported by this release.
Tracking number	218483

Table 3. PR7 messages for all devices logged in LCDuring an AC power cycle stress, random PR7 (New device detected) messages may get logged for devices such as CPU, DIMM, NICs, Storage Cards, and so on in the Lifecycle controller (LC) logs even though no actual hardware-related change was performed. There is no impact on device functionality.
Description	During an AC power cycle stress, random PR7 (New device detected) messages may get logged for devices such as CPU, DIMM, NICs, Storage Cards, and so on in the Lifecycle-Controller (LC) logs even though no actual hardware-related change was performed. There is no impact on device functionality.
Workaround	N/A
Systems Affected	PowerEdge R740, PowerEdge R640, PowerEdge R840, and PowerEdge T640
Tracking number	208278

Table 4. SCP import failing Importing SCP file that was exported from a system with iDRAC version 5.00.15.00 to a system with iDRAC version 5.00.20.00 or later versions may fail.
Description	Importing SCP file that was exported from a system with iDRAC version 5.00.15.00 to a system with iDRAC version 5.00.20.00 or later versions may fail.
Workaround	Update the iDRAC version of the system exporting SCP file to iDRAC version 5.00.20.00 and the try exporting the file again.
Systems Affected	All systems supported by this release.
Tracking number	213900

Table 5. SEL events may not be correctly displayed in the earlier versions of iDRACNew SEL events were introduced in iDRAC versions 4.4x. If iDRAC is rolled back to an earlier version, then new events logged in the version of iDRAC before it was rolled back may be displayed as an unknown event.
Description	New SEL events were introduced in iDRAC versions 4.4x. If iDRAC is rolled back to an earlier version, then new events logged in the version of iDRAC before it was rolled back may be displayed as an unknown event.
Workaround	N/A
Systems Affected	All PowerEdge Rx5x5 or Cx5x5 series servers supported by this release.
Tracking number	186384

Table 6. PR1 & PR10 Lifecycle logs displayed during Retire and Repurpose operation PR1 & PR10 logs are displayed in Lifecycle logs for PSUs when Retire and Repurpose operation is executed. This doesn't impact server functionality.
Description	PR1 & PR10 logs are displayed in Lifecycle logs for PSUs when Retire and Repurpose operation is executed. This doesn't impact server functionality.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	186119

Table 7. SupportAssist collection failingUnable to generate SupportAssist collection while iDRAC is under stress and CPU utilization is above 90%.
Description	Unable to generate SupportAssist collection while iDRAC is under stress and CPU utilization is above 90%.
Workaround	Generate SupportAssist collection with only system information option checked.
Systems Affected	All systems supported by this release.
Tracking number	159527

Table 8. After a warm reboot, LC logs display Disk Inserted After performing a server warm reboot, iDRAC may report Disk Inserted in LC logs for drives behind HBA. Please ignore the log entry.
Description	After performing a server warm reboot, iDRAC may report Disk Inserted in LC logs for drives behind HBA. Please ignore the log entry.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	144819 and 141414

Table 9. Repetitive PR7 messages related to PSU in LC logs after a system erase operation When the system is powered on manually after performing a system erase on LC data, several messages are displayed in LC logs for PSU stating “PR7 New device detected: POWER SUPPLY (PSU.Slot.X)”.
Description	When the system is powered on manually after performing a system erase on LC data, several messages are displayed in LC logs for PSU stating “PR7 New device detected: POWER SUPPLY (PSU.Slot.X)”.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	129440