iDRAC9 Version 5.00.00.00 Release Notes
Storage and storage controllers
- Remote file share disconnecting
- Description
- RFS may get disconnected if iDRAC IP is not reachable for some time.
- Workaround
- Reboot iDRAC.
- Systems affected
- All systems supported by this release.
- Tracking number
- 201672
- LC logs display incorrect version change for disks
- Description
- After a disk firmware upgrade, LC logs may report it as a firmware downgrade with PR36 message.
- Workaround
- Restart the host system.
- Systems affected
- All systems supported by this release.
- Tracking number
- 197049
- Storage Devices displayed in gray text
- Description
- After a reboot stress followed by BIOS update, storage devices may appear as not ready or in gray text.
- Workaround
- Reset iDRAC.
- Systems affected
- All PowerEdge Rx5xx/Cx5xx series supported by this release.
- Tracking number
- 194537
- Deleting VD creates pending operation with empty data
- Description
- When existing VD is deleted from iDRAC GUI using delete VD operation from the Virtual disk option and then added to pending operation, the pending operation displays no information. However, the delete VD pending operation is created successfully.
- Workaround
- To successfully delete the VD and add to pending operations, perform the following steps:
- Select the Configuration option in iDRAC GUI
- Select Storage Configuration, then select the Controller and click Apply now.
- Systems affected
- All systems supported by this release.
- Tracking number
- 184393
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\