iDRAC9 Security Configuration Guide

Configuring Services using Web Interface

You can configure and enable the following services on iDRAC:

• Local Configuration
• Web Server
• SEKM Configuration
• SSH
• Telnet (Telnet is removed from iDRAC firmware 4.40.00.00 and forward)
• Remote RACADM
• SNMP Agent
• Automated System Recovery Agent
• Redfish

To configure the services using iDRAC Web interface:

1. In the iDRAC Web interface, go to iDRAC Settings> Services. The Services page is displayed.
2. Specify the required information and disable all unused services.
3. Click Apply.