Integrated Dell Remote Access Controller 9 RACADM CLI Guide

PDF

getraclog

Table 1. Details of getraclogThe following table provides details about the getraclog subcommand:
Description	The getraclog command displays RAC log entries.
Synopsis	racadm getraclog [-i] racadm getraclog [-s <start>] [-c <count>] racadm getraclog [-c <count>] [-s <start-record>] NOTE:If options are not provided, the entire log is displayed.
Input	-c — Specifies the number of records to display. NOTE:On Local RACADM, the number of logs are restricted to 100 by default. -s — Specifies the starting record used for the display. NOTE:When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options are not displayed.
Output	SeqNumber = 286 Message ID = USR0005 Category = Audit AgentID = RACLOG Severity = Information Timestamp = 2017-05-15 06:25:27 Message = Login failed from processdisco06a: 192.168.0 Message Arg 1 = processdisco06a Message Arg 2 = 10.92.68.245 FQDD = iDRAC.Embedded.1
Example	Display the recent 2 records for RAC log racadm getraclog -c 2 SeqNumber = 4102 Message ID = LIC201 Category = Audit AgentID = DE Severity = Warning Timestamp = 2017-05-15 06:30:20 Message = License yPMRJGuEf7z5HG8LO7gh assigned to device iDRAC expires in 4 days. Message Arg 1 = yPMRJGuEf7z5HG8LO7ghMessage Arg 2 = iDRACMessage Arg 3 = 4 ----------------------------------------------------------------------------------- SeqNumber = 4101 Message ID = USR0032 Category = Audit AgentID = RACLOG Severity = Information Timestamp = 2017-05-15 06:25:27 Message = The session for root from 192.168.0 using RACADM is logged off. Message Arg 1 = root Message Arg 2 = 10.94.98.92 Message Arg 3 = RACADM FQDD = iDRAC.Embedded.1 -------------------------------------------------------------------------------------