Integrated Dell Remote Access Controller 9 RACADM CLI Guide

help and help subcommand

Table 1. help and help subcommandThe following table lists all the commands and subcommands of RACADM and provides a short description about each subcommand. You may also type a subcommand, group, object or Fully Qualified Descriptor (FQDD) name after help.
Description	Lists all the subcommands available for use with RACADM and provides a short description about each subcommand. You may also type a subcommand, group, object or Fully Qualified Descriptor (FQDD) name after help.
Synopsis	racadm help racadm help <subcommand>
Input	<subcommand> — specifies the subcommand for which you need the help information. <device name> — specifies the device name such as iDRAC, BIOS, NIC, LifecycleController, FC, system, or Storage. <group> — specifies the group name supported by the corresponding device. <object> — specifies the object for the entered group.
Output	The help command displays a complete list of subcommands. The racadm help <subcommand> command displays information for the specified subcommand only. The racadm help <device name> <Group> command displays information for the specified group. The racadm help <device name> <Group> <Object> command displays information for the specified object. NOTE:help for NIC/FC/Infiniband vendor implementation specific attributes are fetched from the respective vendors and may not be complete for few attributes.
Example	To display the help information about InfiniBand FQDD: racadm help <InfiniBand FQDD>