Integrated Dell Remote Access Controller 9 RACADM CLI Guide

PDF

sslcertdownload

Table 1. Details of sslcertdownloadThe following table provides details about the sslcertdownload subcommand:
Description	Downloads an SSL certificate from iDRAC to the client’s file system. To run this subcommand for web server certificates, you must have Login to iDRAC and Configure iDRAC privileges and for others only Control and Configure System privilege is required. NOTE:This subcommand is only supported on the remote interface(s).
Synopsis	racadm sslcertdownload -f <filename> -t <type> racadm sslcertupload -t 8 -i <instance(1 or 2)>
Input	-f—Specifies the target filename on local file system to download the certificate. -t <type>—Specifies the type of certificate to download, either the CA certificate for Directory Service or the server certificate. 1—Server Certificate 2—Active Directory 3—Custom Signing Certificate 4—Client Trust Certificate for SSL 6—SEKM SSL certificate 7—KMS CA certificate 8—Rsyslog Server CA 9—RSA CA certificate 10—SCEP CA certificate 11—SCV Signed Certificate NOTE:This input is available for local RACADM only. 12—Rsyslog Server CA Cert 13—Rsyslog Client trust Cert 14—IEEE 802.1X Custom Certificate 15—IEEE 802.1X Server CA Certificate 16—Custom certificate 17—IEEE 802.1X Custom Signing Certificate -i—Instance value should be 1 or 2. This is only applicable for Rsyslog Server CA Certificate(-t 8).
Output	Returns 0 when successful and non-zero number when unsuccessful. racadm sslcertdownload -t 8 -i 1 Telemetry certificate downloaded successfully.
Example	Download server certificate: racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 1 -f cert.txt Download Active Directory certificate: racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 2 -f ad_cert.txt Download telemetry certificate: racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 8 -i 1

NOTE:This command is not supported in the firmware RACADM interface as it is not a file system.