iDRAC9 Version 6.00.02.00 Release Notes

OS deployment

Table 1. Getting an error SWC0018 during OS installation Modifying BIOS Boot Mode while installing operating system thorough Lifecycle Controller GUI, an error "SWC0018" is displayed.
Description	Modifying BIOS Boot Mode while installing operating system thorough Lifecycle Controller GUI, an error "SWC0018" is displayed.
Workaround	This message does not impact the installation, click OK to proceed.
Systems Affected	All systems supported by this release.
Tracking number	143561

Table 2. Boot mode error during OS deployment While deploying OS using LC UI, if the current boot mode is set to UEFI and you change the boot mode to BIOS and click Finish on the last LC UI page, an error is displayed stating that the boot mode could not be set. The system reboots after you click OK. However, on next boot to LC UI, the boot mode is changed to BIOS and the boot device selected during OS deployment is discarded.
Description	While deploying OS using LC UI, if the current boot mode is set to UEFI and you change the boot mode to BIOS and click Finish on the last LC UI page, an error is displayed stating that the boot mode could not be set. The system reboots after you click OK. However, on next boot to LC UI, the boot mode is changed to BIOS and the boot device selected during OS deployment is discarded.
Workaround	Before deploying OS using LC UI, change the boot mode to BIOS from BIOS setup (F2 at POST).
Systems Affected	All systems supported by this release.
Tracking number	98665