Inspiron 7501 Service Manual

Password

Table 1. SecurityThe table describes the security configuration information.
Option	Description
Admin Password	Allows you to set, change, or delete the administrator (admin) password. The entries to set password are: Enter the old password: Enter the new password: Press Enter once you enter the new password and again press Enter to confirm the new password. NOTE Deleting the admin password deletes the system password (if set). The admin password can also be used to delete hard drive password. For this reason, you cannot set an admin password if a system password or hard drive password is set. Hence, an admin password has to be set first if the admin password has to be used with system password and/or hard drive password.
System Password	Allows you to set, change, or delete the system password. The entries to set password are: Enter the old password: Enter the new password: Press Enter once you enter the new password and again press Enter to confirm the new password.
Password Configuration	Allows you to configure a password. Upper Case Letter When enabled, this field reinforces password must contain at least one upper capital letter. Lower Case Letter When enabled, this field reinforces password must contain at least one lower capital letter. Digit When enabled, this field reinforces password must contain at least one-digit number. Special Character When enabled, this field reinforces password must contain at least one special character. NOTE These options by default are disabled. Minimum Characters Defines the number of characters allowed for a password. Min = 4
Password Bypass	Allows you to bypass the System password and the Internal hard drive password, when it is set, during a system restart. The options are: Disabled—This option is enabled by default. Reboot bypass
Password Changes	Allows you to change the system password and hard drive password without the need of administrator password. Enable Non-Admin Password Changes - By default, this option is disabled.
Admin Setup Lockout	Allows the administrator to control how the user can access BIOS setup. Enable Admin Setup Lockout - By default, this option is disabled. NOTE If the admin password is set and Enable Admin Setup Lockoutis enabled, you cannot view the BIOS setup (using F2 or F12) without the admin password. If the admin password is set and Enable Admin Setup Lockoutis disabled, the BIOS setup can be entered and items that are viewed in Locked mode.
Master Password Lockout	Allows you to disable master password support. Enable Master Password Lockout - By default, this option is disabled. NOTE The Hard Disk password has to be cleared before the settings can be changed.