Inspiron 16 5620 - for computers with DDR4 memory Service Manual

PDF

Removing the memory module

Prerequisites

  1. Follow the procedure in Before working inside your computer.
    NOTE:Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer.
  2. Remove the base cover.

About this task

The following image(s) indicate the location of the memory module and provides a visual representation of the removal procedure.

Removing the memory module

Steps

  1. Lift the mylar covering the memory module.
  2. Using your fingertips, carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops-up.
  3. Remove the memory module from the memory-module slot on the system board.
    NOTE:Your computer has two memory modules installed. Repeat steps 1 to 3 for the memory module installed in the second memory slot.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\