Inspiron 24 5420 All-in-One Owner's Manual

Back panel

1. 2 USB 3.2 Gen 1 port with Power on/Wake-up support

   Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. Wake the computer from standby with the keyboard or mouse connected to this port.

   NOTE:Set the BIOS Deep Sleep control to disabled to enable Wake up when the computer is powered off.
2. HDMI-in port

   Connect a gaming console, Blu-ray player, or other HDMI-out enabled device.

3. HDMI port

   Connect to a TV, external display or another HDMI-in enabled device. Provides video and audio output.

4. Power-adapter port

   Connect a power adapter to provide power to your computer and charge the battery.

5. Network port

   Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access.

6. USB 3.2 Gen 2 port with PowerShare

   Connect peripherals such as external storage devices and printers.

   Provides data transfer speeds up to 10 Gbps. PowerShare enables you to charge connected USB devices.

   NOTE:Connected USB devices will not charge when the computer is turned off. Please set BIOS Deep Sleep control to disabled to start charging when the computer is powered off.
7. USB 3.2 Gen 1 port with Power on/Wake-up support

   Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. Wake the computer from standby with the keyboard or mouse connected to this port.

   NOTE:Set the BIOS Deep Sleep control to disabled to enable Wake up when the computer is powered off.
8. Universal headset jack

   Connect audio-output devices such as speakers, amplifiers, and so on.

9. SD-card slot

   Reads from and writes to the SD card. The computer supports the following card types:

   • Secure Digital (SD)
   • Secure Digital High Capacity (SDHC)
   • Secure Digital Extended Capacity (SDXC)