Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User's Guide

Configuring iDRAC7 to Use SOL Using iDRAC7 Web Interface

To configure IPMI Serial over LAN (SOL):
  1. In the iDRAC7 Web interface, go to Overview > iDRAC Settings > Network > Serial Over LAN . The Serial over LAN page is displayed.
  2. Enable SOL, specify the values, and click Apply. The IPMI SOL settings are configured.
  3. To set the character accumulate interval and the character send threshold, select Advanced Settings. The Serial Over LAN Advanced Settings page is displayed.
  4. Specify the values for the attributes and click Apply.

    The IPMI SOL advanced settings are configured. These values help to improve the performance.

    For information about the options, see the iDRAC7 Online Help.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\