Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Latitude 3190 2-in-1 Owner’s Manual

Power management screen options

Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.

Default setting: Wake on AC is not selected.

Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
  • Disabled
  • Every Day
  • Weekdays
  • Select Days

Default setting: Disabled

USB Wake Support
Allows you to enable USB devices to wake the system from Standby.
NOTE This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power.
  • Enable USB Wake Support

Default setting: The option is disabled.

Wake on WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal.
  • Disabled (default)
  • WLAN Only
Block Sleep
This option lets you block entering to sleep in operating system environment.

Default setting: This option is disabled

Peak Shift
This option enables you to minimize the AC power consumption during the peak power times of day. After you enable this option, your system runs only in battery even if the AC is attached.
  • Enable peak shift
  • Set battery threshold (15% to 100%) - 15 % (enabled by default)
Advanced Battery Charge Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the standard charging algorithm and other techniques during the nonwork hours to improve the battery health.

Default setting: Disabled

Primary Battery Charge Configuration
Allows you to select the charging mode for the battery. The options are:
  • Adaptive—enabled by default
  • Standard—Fully charges your battery at a standard rate.
  • ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology This option is enabled by default.
  • Primarily AC use
  • Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\