Latitude 5290 2-in-1 Owner's Manual

Installing the docking board

1. Insert the docking board and docking board bracket into the slot on the tablet.
2. Replace the M2 x 2 screws to secure the docking board to the tablet.
3. Affix the docking board cable on the tablet,
4. Connect the docking board cable to the connector on the system board.
5. Install the:
   1. battery
   2. display panel
   3. uSIM/microSD card

      NOTE: : uSIM card is installed only on tablets shipping with WWAN module.

6. Follow the procedure in After working inside your tablet.