Latitude 5290 2-in-1 Owner's Manual

Installing the USB board with power button

1. Replace the USH board in the slot on the tablet.
2. Connect the M2 x 2.5 screw to secure the USH board
3. Connect the USB board cable to the connector on the USH board.
4. Connect the NFC and the fingerprint reader cables to the connectors on the system board.
5. Replace the shield on the USH board.
6. Install the:
   1. smart card cage
   2. battery
   3. display panel
   4. uSIM/microSD card

      NOTE: : uSIM card is installed only on tablets shipping with WWAN module.

7. Follow the procedure in After working inside your tablet.